The netns code was using EXIT_SUCCESS/EXIT_FAILURE but the rest of the ip
code used -1 explictly, so change to follow convention. Also, certain types
of errors like fork failure should abort a batch operation, rather than just
returning an error.
execvp() does not return when the command succeed, hence all commands in the
batch file after the line 'ip netns exec' are not executed.
Let's fork before calling execvp() if batch mode is used..
Example:
$ cat test.batch
netns add netns1
netns exec netns1 ip l
netns
$ ip -b test.batch
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: sit0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT
link/sit 0.0.0.0 brd 0.0.0.0
All command after 'netns exec' are never executed.
With the patch:
$ ip -b test.batch
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: sit0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT
link/sit 0.0.0.0 brd 0.0.0.0
netns1
Now, existing netns are displayed.
Signed-off-by: JunweiZhang <junwei.zhang@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Without patch, I got:
# ./ip/ip tunnel show
ip_vti0: ioctl 89f4 failed: Invalid argument
ip_vti0: ip/ip remote any local any ttl inherit nopmtudisc key 0
this is due to VTI_ISVTI has the same numeric value with SIT_ISATAP,
but only sit tunnel has SIOCGETPRL, therefore it should check for SIT
tunnel first.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <amwang@redhat.com>
This patch adds quickack option to enable/disable TCP quick ack
mode for per-route.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
This patch adds multi_queue option to ip tuntap.
This allows IFF_MULTI_QUEUE flag to be specified during
tun/tap device creation enabling multi-queue support in tun/tap
device.
Example: ip tuntap add dev tap0 mode tap multi_queue
Signed-off-by: Sriram Narasimhan <sriram.narasimhan@hp.com>
This is now possible, because the dump function has been added in kernel.
Note that IPv4 and IPv6 entries are displayed.
Before this patch, only all entries were displayed.
Example:
$ ip netconf
ipv4 dev lo forwarding on rp_filter off mc_forwarding 0
ipv4 dev eth0 forwarding on rp_filter off mc_forwarding 1
ipv4 all forwarding on rp_filter off mc_forwarding 1
ipv4 default forwarding on rp_filter off mc_forwarding 0
ipv6 dev lo forwarding on mc_forwarding 0
ipv6 dev eth0 forwarding on mc_forwarding 0
ipv6 all forwarding on mc_forwarding 0
ipv6 default forwarding on mc_forwarding 0
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For the display part, we print extra-flags only if show_stats is set, like for
standard flags.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This change shifts burden onto the users to choose the UDP port value.
Kernel default value is incorrect UDP port 5287 but now there is
an official assigned port for VXLAN.
The kernel can't change because of legacy compatibility
but new deployments should not use the legacy port value.
Add ability to set UDP destination port on a per device basis.
If no port is assigned, the default IANA assigned port will be used.
If you want the kernel default value, then use port 0.
Source port range option is now called 'srcport', to avoid
confusion. The old option syntax is accepted for compatiablity.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for tokenized IIDs, that enable
administrators to assign well-known host-part addresses
to nodes whilst still obtaining global network prefix
from Router Advertisements. This is the iproute2 part for
the kernel patch f53adae4eae5 (``net: ipv6: add tokenized
interface identifier support'').
Example commands with iproute2:
Setting a device token:
# ip token set ::1a:2b:3c:4d/64 dev eth1
Getting a device token:
# ip token get dev eth1
token ::1a:2b:3c:4d dev eth1
Listing all tokens:
# ip token list (or: ip token)
token :: dev eth0
token ::1a:2b:3c:4d dev eth1
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Change ALGO-KEY to ALGO-KEYMAT to make it more obvious that the
keying material might need to contain more than just the key (such
as a salt or nonce value).
List the algorithm names that currently exist in the kernel.
Indicate that for IPComp, the Compression Parameter Index (CPI) is
used as the SPI.
Group the list of mode values by transform protocol.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Ensure that only algorithms and modes supported by the transform
protocol are specified (so that errors are more obvious).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
AEAD algorithms perform both encryption and authentication; they are
not combined with separate encryption or authentication algorithms.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
A Security Policy Index (SPI) is not used with Mobile IPv6. IPComp
uses a smaller 16-bit Compression Parameter Index (CPI) which is
passed as the SPI value. Perform checks whenever specifying an ID.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
When unmanaged L2TP sessions are created using "ip l2tp add session",
there is no option to allow the session's Layer2SpecificHeader type to
be selected - the kernel's default setting is always used. For
interopability with some vendor equipment, it might be necessary to
use a different setting. So add a new l2spec_type parameter to the "ip
l2tp add session" parameter list, allowing operators to set a specific
Layer2SpecificHeader type. The kernel already exposes the setting as a
netlink attribute so it is straightforward to add support for it in
iproute2.
This change allows unmanaged L2TP sessions to be configured between
Linux and some Cisco equipment by specifying "l2spec_type none" in "ip
l2tp add session" command parameters.
Signed-off-by: James Chapman <jchapman@katalix.com>
My previous commit introduced a patch to allow for states with different
ip address families for selector and id. The must have somehow been a
mixup of the patch I tested and the one I send, so the patch sent breaks
the iproute2 build. This patch fixes this. My apologies.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Do not enforce the selector of a state to have the same address family
as the id. This makes it possible to configure inter family states.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Both ip-link and ip-address support the 'up' argument, however this
isn't documented in neither their help outputs or ip-address' manpage.
This patch fixes that.
Signed-off-by: Petr Šabata <contyk@redhat.com>
Reported-by: Jiří Popelka <jpopelka@redhat.com>
While looking into a sysctl regression in decnet on old kernels I
discovered this omission in the iproute2 documentation.
I can't imagine anyone's muscle memory remembering the longer forms.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Some platforms like ppc64 have unsigned long long as 128 bits, and
the printf format string would cause errors. Resolve this by using
unsigned long long where necessary (or unsigned long).
Fixes Debian bug #700434
Need to table id in filter to be unsigned to avoid conversion to -1
The documentation for "ip" suggests that, when using multiple routing tables, the table ID can be an arbitrary 32 bit number. I've been writing a script that calculates a table Id based on an IP addresses and sets up tables accordingly based on it. This seems to work for everything I've tried except "ip route flush". If you specify a table to flush with an ID over 2^31, it flushes all IPv4 routing tables. For example:
Will delete all routing tables, including the default one. Needless to say, this is quite annoying. I think this is an upstream bug, but your opinions will be greatly appreciated.
This patch improves many error messages as follows:
- For incorrect parameters, show the value of the offending parameter, rather than just say that it is incorrect
- Rephrased messages for clarity
- Rephrased to more `mainstream' english
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
Since do_help() has to return an int to fit in the table of commands,
it should actually return an int. This patch lets it do so.
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
This is useful to know the 'real' status of an interface (the flag IFF_PROMISC
is exported by the kernel only when the user set it explicitly, for example it
will not be exported when a tcpdump is running).
This information will be displayed when '-details' is provided by the user.
Example:
$ ip -d l l tun10
6: tun10: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN mode DEFAULT
link/sit 10.16.0.249 peer 10.16.0.121
sit remote 10.16.0.121 local 10.16.0.249 ttl inherit pmtudisc 6rd-prefix 2002::/16
promiscuity 2
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The 'inherit/STRING' or 'inherit/00..ff' syntax indicates that the
TOS field of tunneled packets should be copied from the original IP
header, but for non-IP packets the value STRING or 00..ff should be
used instead. (This syntax is already used by 'ip tunnel show'.)
Also clarify the man page and the command usage text (particularly
that the TOS is not specified as a decimal number).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Add command that go between network namespace names and process
identifiers. The code builds and runs agains older kernels but
only works on Linux 3.8+ kernels where I have fixed stat to work
properly.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Sometimes "ip netns delete" fails because it can not delete the file a
network namespace was mounted on. If this only happened when a
network namespace was really in use this would be fine, but today it
is possible to pin all network namespaces by simply having a long
running process started with "ip netns exec".
Every mount is copied when a network namespace is created so it is
impossible to prevent the mounts from getting into other mount
namespaces. Modify all mounts in the files and subdirectories of
/var/run/netns to be shared mount points so that unmount events can
propogate, making it unlikely that "ip netns delete" will fail because
a directory is mounted in another mount namespace.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Ben Hutchings pointed out that the return value of do_netns is passed
to exit and the current convention of returning -1 for failure is
inconsitent with that reality.
Return EXIT_FAILURE instead of -1 and EXIT_SUCCESS instead of 0. To make
it clear that the return codes are expected to be passed to exit.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Some systems are now following the advice in
linux/Documentation/sharedsubtrees.txt and running with all mount
points shared between all mount namespaces by default.
After creating the mount namespace call mount on / with
MS_SLAVE|MS_REC to modify all mounts in the new mount namespace to
slave mounts if they are shared or private mounts otherwise.
Guarnateeing that changes to the mount namespace created with
"ip netns exec" don't propgate to other namespaces.
Reported-by: Petr Šabata <contyk@redhat.com>
Tested-by: Petr Šabata <contyk@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Clang doesn't support the gcc extension for embeddeding flexible arrays
inside of structures. Use the slightly more portable alloca().
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
mroute was using /proc/net/ip_mr_[vif|cache] to display mroute entries. Hence,
only RT_TABLE_DEFAULT was displayed and only IPv4.
With rtnetlink, it is possible to display all tables for IPv4 and IPv6. The output
format is kept. Also, like before the patch, statistics are displayed when user specify
the '-s' argument.
The patch also adds the support of 'ip monitor mroute', which is now possible.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch adds a new flag to iproute2 for vxlan devices to enable
DOVE features. It also adds support for L2 and L3 switch lookup miss
netlink messages to "ip monitor".
Changes since v2: fix merge conflict
Changes since v1:
- split "dove" flag into separate feature flags:
- "proxy" for ARP reduction
- "rsc" for route short circuiting
- "l2miss" for L2 switch miss notifications
- "l3miss" for L3 switch miss notifications
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
This patch allows to manage ip tunnels via the interface ip link.
The syntax for parameters is the same that 'ip tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch allows to manage ip6 tunnels via the interface ip link.
The syntax for parameters is the same that 'ip -6 tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Example of the output:
$ ip monitor netconf&
[1] 24901
$ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
ipv6 dev lo forwarding off
ipv6 dev eth0 forwarding off
ipv6 all forwarding off
$ echo 1 > /proc/sys/net/ipv4/conf/eth0/forwarding
ipv4 dev eth0 forwarding on
$ ip -6 netconf
ipv6 all forwarding on mc_forwarding 0
$ ip netconf show dev eth0
ipv4 dev eth0 forwarding on rp_filter off mc_forwarding 1
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Minor cleanup of original patch, made sure netconf.h matched
result of santized kernel headers
When tclass or flowlabel field were updated, we only performed an OR with the
new value. For example, it was not possible to reset tclass:
ip -6 tunnel change ip6tnl2 tclass 0
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Flag IP6_TNL_F_IGN_ENCAP_LIMIT is set when encaplimit is none, but it was not
removed if encaplimit was set on update (ip tunnel change).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
IPv6 multipath routes were not accepted by "ip route" because an IPv4
address was expected for each gateway. Use `get_addr()` instead of
`get_addr32()`.
Signed-off-by: Vincent Bernat <bernat@luffy.cx>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Added support to ipoib rtnl ops through which one can create, configure,
query and delete IPoIB devices, for example
$ ip link add link ib0.8001 name ib0.8001 type ipoib pkey 0x8001
$ ip link add link ib0.1 name ib0.1 type ipoib mode connected
$ ip --details link show dev ib0.1
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
ip tcp_metrics/tcpmetrics
We support get/del for single entry and dump for
show/flush.
v3:
- fix rtt/rttvar shifts as suggested by Eric Dumazet
- show rtt/rttvar usecs as suggested by David Laight
Signed-off-by: Julian Anastasov <ja@ssi.bg>
When running 'ip monitor neigh', there is no hint to tell if a neighbor is
updated or deleted.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Both macros are used together, so better to have
single define. Update all requests in ipl2tp.c to use the
new macro.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
This functionality is required by checkpoint-restore project. Since the
dump and restore for routes is already done in ip tool it's naturally to
dump and restore addresses in the ip tool as well.
The implementation logic is the same as for the respective one for routes.
The magic number digits are taken from the Seattle coordinates.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Some time ago the save+restore commands were added to ip route (git
id f4ff11e3, Add ip route save/restore). These two save the raw rtnl
stream into a file and restore one (reading it from stdin).
The problem is that there's no way to get the contents of the dump
file in a human readable form. The proposal is to add a command that
reads the rtnl stream from stdin and prints the data in a way the
usual "ip route list" does?
changes since v1:
* Take the magic at the beginning of the dump file into account
* Check for stdin (the dump is taken from) is not a tty
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
In order to somehow verify that a blob contains route dump a
4-bytes magic is put at the head of the data and is checked
on restore.
Magic digits are taken from Portland (OR) coordinates :) Is
there any more reliable way of generating such?
Signed-of-by: Pavel Emelyanov <xemul@parallels.com>
`ip a s` no longer shows addresses since 3.4.0 works, but 3.5.0,
the simple test case:
make clean && make -j -s && ./ip/ip a s lo
before that change, i would get:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
but after, i now get:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
seems like the bug was introduced in the middle of that patch:
- if (filter.family != AF_PACKET) {
+ if (filter.family && filter.family != AF_PACKET) {
+ if (filter.oneline)
+ no_link = 1;
+
if (rtnl_wilddump_request(&rth, filter.family, RTM_GETADDR) < 0) {
perror("Cannot send dump request");
exit(1);
if i revert the change to the if statement there, `ip a s` works for me again.
Alternative solution to problem reported by Pravin B Shelar <pshelar@nicira.com>
Split large function ipaddr_list_or_flush into components.
Fix memory leak of address and link nlmsg info.
Avoid fetching address info if only flushing.
ip link has quadratic behavior because store_nlmsg()
has a head list pointer and search the end of list.
Provides a head/tail to cut time.
Time with 128000 net devices, to do "ip link show dev xxx"
Before: 2m3.594s
After: 0m2.830s
Signed-off-by: Eric Dumazet <edumazet@google.com>
Adds support for parsing IPv6 addresses to the parameters local and
remote in the l2tp commands. Requires netlink attributes L2TP_ATTR_IP6_SADDR
and L2TP_ATTR_IP6_DADDR, added in a required kernel patch already submitted
to netdev.
Also enables printing of IPv6 addresses returned by the L2TP_CMD_TUNNEL_GET
request.
Signed-off-by: Chris Elston <celston@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Reported by Robert Henney:
> the 'ip' man page does not mention the command "del" at all but does
> claim, "As a rule, it is possible to add, delete and show (or list ) objects".
> however, 'ip' does not always recognize "delete" as a commend.
>
> robh@debian:~$ ip tunnel delete
> Command "delete" is unknown, try "ip tunnel help".
Lets use "delete" in all calls to matches() for consistency. This will
make both "del" and "delete" work everywhere.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Adds support for parsing IPv6 addresses to the parameters local and
remote in the l2tp commands. Requires netlink attributes L2TP_ATTR_IP6_SADDR
and L2TP_ATTR_IP6_DADDR, added in a required kernel patch already submitted
to netdev.
Also enables printing of IPv6 addresses returned by the L2TP_CMD_TUNNEL_GET
request.
Signed-off-by: Chris Elston <celston@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Define where is the are located the iproute2 config files.
Get rid of trailing slashes for paths in several file.
Signed-off-by: Christoph J. Thompson <cjsthompson@gmail.com>
Hi,
I've attached a trivial patch for iproute2 to allow naming interfaces
created with "ip l2tp add session".
I believe patches should go through the netdev mailing list but this
patch is so small I figured that would just add noise. Hope that's OK.
Originally I thought I would need a bigger patch and was going to take a
stab at implementing something like
ip l2tp add tunnel L2TP_TUNNEL_ARGS
ip link add name NAME [ LINK_OPTS ] type l2tp L2TP_SESSION_ARGS
(a better interface IMHO) but all the code was there already, all that I
needed to add was option parsing.
Thanks,
João Valverde
From fd8c3b712527d2e959aeabc6f6b71a9910e7be7e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jo=C3=A3o=20Valverde?= <joao.valverde@ist.utl.pt>
Date: Mon, 26 Mar 2012 18:30:56 +0100
Subject: [PATCH] ipl2tp: allow setting session interface name
The kernel supports a link mode attribute (which can be dormant or default).
This attribute is used to control how the link watch engine
handles operstate transistion.
This adds a new parameter to ip link command to allow setting and
displaying the value.
---
There is nothing in the standard that says 0 can't be used as a key.
It makes sense to allow it. Also fix typo where ikey was printed for
when printing okey.
Stephen Hemminger
JunweiZhang
Amerigo Wang
Adam Borowski
Patric McHardy
Rony Efraim
Andrey Vagin
Sriram Narasimhan
Nicolas Dichtel
Daniel Borkmann
David Ward
James Chapman
Thomas Egerer
Petr Šabata
roopa
Eric W. Biederman
Kees van Reeuwijk
Mike Frysinger
Strake
Zhi Yong Wu
David L Stevens
Vincent Bernat
Or Gerlitz
Stephen Hemminger
Julian Anastasov
Petr Písař
Pavel Emelyanov
Dan Kenigsberg
Jiri Pirko
Saurabh
Eric Dumazet
Chris Elston
Andreas Henriksson
Christoph J. Thompson
Jorge Boncompte [DTI2]
Stephen Hemminger
João Valverde
Florian Westphal