Doc text shamelessly stolen from the introducing commit's message
(6c55c8c461 ['ip link set vf: Added "query_rss" command']).
Signed-off-by: Phil Sutter <phil@nwl.cc>
Extend ip-link to create MACsec devices
ip link add link <master> <macsec> type macsec [options]
Add `ip macsec` command to configure receive-side secure channels and
secure associations within a macsec netdevice.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Phil Sutter <phil@nwl.cc>
This patch drops the redundant description of some of ip's options in
ip-link.8's description of the 'show' subcommand, preserving the
description of -iec (but appending it to the list in ip.8 with minor
fixes).
Signed-off-by: Phil Sutter <phil@nwl.cc>
Follow-up for kernel commit 8eb3b99554b8 ("geneve: support setting
IPv6 flow label") to allow setting the label for the device config.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Follow-up for kernel commit e7f70af111f0 ("vxlan: support setting
IPv6 flow label") to allow setting the label for the device config.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Listing generic 'ip' options in subcommand man pages is redundant and
error-prone, as they won't be kept in sync anyway. Since many other man
pages don't list them either, drop references to them in the remaining
ones.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reflect that it is possible to pass multiple parameters at the same
time, also use the same trick the help text uses to emphasize vf
specific parameters.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add IFLA_VF_TRUST message to trust the VF.
PF can accept some privileged operation from the trusted VF.
For example, ixgbe PF doesn't allow to enable VF promiscuous mode until
the VF is trusted because it may hurt performance.
To trust VF.
# ip link set dev eth0 vf 1 trust on
To untrust VF.
# ip link set dev eth0 vf 1 trust off
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
grff wrapper returns warnings when parsing the ip-link.8.in file.
How to reproduce:
$ man --warnings ip-link > /dev/null
`R' is a string (producing the registered sign), not a macro.
[...]
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Options 'group' and 'remote' cannot take 'any' as value but 'local' can.
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This adds support for slightly less output than is normally provided by
'ip link show' and 'ip addr show'. This is a bit better when you have a
host with lots of interfaces. Sample output:
$ ip -br link show
lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
p2p1 UP 08:00:27:ee:0b:3b <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
p8p1 DOWN 08:00:27:dc:d8:ca <NO-CARRIER,BROADCAST,MULTICAST,UP>
p9p1 UP 08:00:27:76:d9:75 <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1.100@p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
$ ip -br -4 addr show
lo UNKNOWN 127.0.0.1/8
p2p1 UP 192.168.56.2/24
p7p1 UP 70.0.0.1/24
p8p1 DOWN 80.0.0.1/24
p9p1 UP 10.0.5.15/24
p7p1.100@p7p1 UP 200.0.0.1/24
$ ip -br -6 addr show
lo UNKNOWN ::1/128
p2p1 UP fe80::a00:27ff:feee:b3b/64
p7p1 UP 7000::1/8 fe80::a00:27ff:fe9d:629f/64
p8p1 DOWN 8000::1/8
p9p1 UP fe80::a00:27ff:fe76:d975/64
p7p1.100@p7p1 UP fe80::a00:27ff:fe9d:629f/64
$ ip -br addr show p7p1
p7p1 UP 70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64
v2: Now with color support!
v3: Better field width estimation (except netdev names to keep output at a
decent width) and whitespace fixup.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Add little more info about how to manually set priority by iptables,
and some little clarifications about ingress/egress QoS mapping.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
* Add `can` to list of supported link types
* Document `addrgenmode`
* Document `link-netnsid`
* Document VLAN link type
* Improve VXLAN link type documentation
- Fix VXLAN srcport/dstport docs
- Document `udpcsum`, `udp6zerocsumtx` and `udp6zerocsumrx`
This patch adds support to set and display protodown on a switch port. The
switch driver can handle this error state by doing a phys down on the port.
One example user space application setting this flag is a multi-chassis
LAG application to handle split-brain situation on peer-link failure.
Example:
root@net-next:~# ip link set eth1 protodown on
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff protodown on
root@net-next:~/iproute2# ip link set eth1 protodown off
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff
root@net-next:~/iproute2#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Indicate possibility deleting virtual links by group.
Also changed the alignment of 'ip link delete' args
descriptions, to look like similary to 'ip link set'.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Added some clarification why 'ip link set netns' can not
change network namespace for some kind of devices.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Add section for additional arguments to GRE, IPIP, and SIT types
that are related to Foo-over-UDP and Generic UDP Encapsulation.
Also, added an example GUE configuration in the examples section.
Signed-off-by: Tom Herbert <therbert@google.com>
In the ip-link(8) man page, for the gretap, ip6gre, and ip6gretap types, the
word tunnel was incorrectly spelled 'tuunel'.
Signed-off-by: Reese Moore <ram@vt.edu>
Added new option 'type' to 'ip link show'
command which allows to filter devices by type:
ip link show type bridge
ip link show type vlan
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
BEFORE:
The show command has additional formatting options:
-s, -stats, -statistics
output more statistics about packet usage.
-d, -details
output more detailed information.
-h, -human, -human-readble
output statistics with human readable values number followed by suffix
-iec print human readable rates in IEC units (ie. 1K = 1024).
AFTER:
The show command has additional formatting options:
-s, -stats, -statistics
output more statistics about packet usage.
-d, -details
output more detailed information.
-h, -human, -human-readble
output statistics with human readable values number followed by suffix
-iec print human readable rates in IEC units (ie. 1K = 1024).
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Phil Sutter
Sabrina Dubroca
Peter Heise
Jiri Benc
Daniel Borkmann
Hiroshi Shimamoto
Thomas Faivre
Bjørn Mork
Vadim Kochan
Stephen Hemminger
Andy Gospodarek
Pavel Šimerda
Anuradha Karuppiah
John W. Linville
Lennert Buytenhek
Tom Herbert
Thomas Graf
Reese Moore