Support for the new rx_nohandler statistic.
This code is designed to handle the case where the kernel reported statistic
structure is smaller than the larger structure in later releases (and vice versa).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
"random" is a new IPv6 addrgenmode, enabling "stable_secret" type
addresses with an auto-generated secret.
$ ip link set eth0 addrgenmode random
$ ip -d link show dev eth0
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:21:86:a3:25:7d brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode random
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Linux version 3.1 introduced a consistency check for netlink dumps in
commit 670dc28 ("netlink: advertise incomplete dumps"). This bites
iproute2 when flushing more addresses than can fit into a single
RTM_GETADDR response. To silence the spurious error message "Dump was
interrupted and may be inconsistent.", advise rtnl_dump_filter_l() to
not care about NLM_F_DUMP_INTR.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Since it's no longer relevant whether an IP address is primary or
secondary when flushing, ipaddr_flush() can be simplified a bit.
Signed-off-by: Phil Sutter <phil@nwl.cc>
I found recently that, if I disabled address promotion in the kernel, that
ip addr flush dev <dev>
would fail with an EADDRNOTAVAIL errno (though the flush operation would in fact
flush all addresses from an interface properly)
Whats happening is that, if I add a primary and multiple secondary addresses to
an interface, the flush operation first ennumerates them all with a GETADDR |
DUMP operation, then sends a delete request for each address. But the kernel,
having promotion disabled, deletes all secondary addresses when the primary is
removed. That means, that several delete requests may still be pending in the
netlink request for addresses that have been removed on our behalf, resulting in
EADDRNOTAVAIL return codes.
It seems the simplest thing to do is to understand that EADDRUNAVAIL isn't a
fatal outcome on a flush operation, as it just indicates that an address which
you want to remove is already removed, so it can safely be ignored.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Device names that match "help" or a prefix thereof should be allowed anywhere
a device name can be used. Note that a suitable keyword ("dev" or "name", the
latter for "ip tunnel") has to be used in these cases to resolve ambiguities.
Signed-off-by: Christoph Schulz <develop@kristov.de>
Reported-by: Leonhard Preis <leonhard@pre.is>
Reported-by: Wilhelm Wijkander <lists@0x5e.se>
The brief format does not honer the master and type filters:
$ ip link show master vrf-mgmt
7: dummy0: <BROADCAST,NOARP,SLAVE> mtu 1500 qdisc noop master vrf-mgmt state DOWN mode DEFAULT group default qlen 1000
link/ether 66:39:cc:2b:e9:bd brd ff:ff:ff:ff:ff:ff
$ ip -br link show master vrf-mgmt
lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
eth0 UP 08:00:27🇩🇪14:c8 <BROADCAST,MULTICAST,UP,LOWER_UP>
eth1 UP 08:00:27:87:02:f1 <BROADCAST,MULTICAST,UP,LOWER_UP>
eth2 UP 08:00:27:61:1e:fd <BROADCAST,MULTICAST,UP,LOWER_UP>
vrf-blue UNKNOWN a6:3f:09:34:7e:74 <NOARP,MASTER,UP,LOWER_UP>
vrf-red DOWN fe:a2:2d:e1:bc:ac <NOARP,MASTER>
dummy0 DOWN 66:39:cc:2b:e9:bd <BROADCAST,NOARP,SLAVE>
dummy1 DOWN 4a:4f:13:91:64:b1 <BROADCAST,NOARP,SLAVE>
dummy2 DOWN b2:4f:b6💿bd:a6 <BROADCAST,NOARP>
dummy3 DOWN 1e:06:3d:40:b8:c2 <BROADCAST,NOARP,SLAVE>
vrf-mgmt DOWN ce:b2:74:41:21:df <NOARP,MASTER>
With this patch the expected output is shown:
$ ip -br link show master vrf-mgmt
dummy0 DOWN 66:39:cc:2b:e9:bd <BROADCAST,NOARP,SLAVE>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
This adds support for slightly less output than is normally provided by
'ip link show' and 'ip addr show'. This is a bit better when you have a
host with lots of interfaces. Sample output:
$ ip -br link show
lo UNKNOWN 00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
p2p1 UP 08:00:27:ee:0b:3b <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
p8p1 DOWN 08:00:27:dc:d8:ca <NO-CARRIER,BROADCAST,MULTICAST,UP>
p9p1 UP 08:00:27:76:d9:75 <BROADCAST,MULTICAST,UP,LOWER_UP>
p7p1.100@p7p1 UP 08:00:27:9d:62:9f <BROADCAST,MULTICAST,UP,LOWER_UP>
$ ip -br -4 addr show
lo UNKNOWN 127.0.0.1/8
p2p1 UP 192.168.56.2/24
p7p1 UP 70.0.0.1/24
p8p1 DOWN 80.0.0.1/24
p9p1 UP 10.0.5.15/24
p7p1.100@p7p1 UP 200.0.0.1/24
$ ip -br -6 addr show
lo UNKNOWN ::1/128
p2p1 UP fe80::a00:27ff:feee:b3b/64
p7p1 UP 7000::1/8 fe80::a00:27ff:fe9d:629f/64
p8p1 DOWN 8000::1/8
p9p1 UP fe80::a00:27ff:fe76:d975/64
p7p1.100@p7p1 UP fe80::a00:27ff:fe9d:629f/64
$ ip -br addr show p7p1
p7p1 UP 70.0.0.1/24 7000::1/8 fe80::a00:27ff:fe9d:629f/64
v2: Now with color support!
v3: Better field width estimation (except netdev names to keep output at a
decent width) and whitespace fixup.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
* Improve manual page synopsis and built-it help
* Use full subcommand names (e.g. 'address' and 'maddress')
* Specify when IPv4, IPv6 or both are affected
* Add lifetimes, home and nodad
* Remove any remaining excess spaces
Commit 43d29f7 substantially improves generated ip-address.8 instead of
ip-address.8.in and commit e419f2d removes the generated one losing the
improvements entirely. This commit recovers the lost changes, adapts
them to the current manual page and adds more man page and help
improvements.
Original commit by: Kenyon Ralph <kenyon@kenyonralph.com>
This patch adds support to set and display protodown on a switch port. The
switch driver can handle this error state by doing a phys down on the port.
One example user space application setting this flag is a multi-chassis
LAG application to handle split-brain situation on peer-link failure.
Example:
root@net-next:~# ip link set eth1 protodown on
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff protodown on
root@net-next:~/iproute2# ip link set eth1 protodown off
root@net-next:~/iproute2# ip link show eth1
4: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 52:54:00:12:35:01 brd ff:ff:ff:ff:ff:ff
root@net-next:~/iproute2#
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
We forgot to include this patch somehow. So do it now.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Enable reading and displaying SRIOV VFs traffic statistics through
the host PF netdevice using the nested IFLA_VF_STATS attribute.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
There have been several instances where response from kernel
has overrun the stack buffer from the caller. Avoid future problems
by passing a size argument.
Also drop the unused peer and group arguments to rtnl_talk.
It is hard to quickly find what you are looking for in the output of the
ip command. Color helps.
This patch adds a '-c' flag to highlight these with individual colors:
- interface name
- ip address
- mac address
- up/down state
Signed-off-by: Mathias Nyman <m.nyman@iki.fi>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Joining multicast group on ethernet level via "ip maddr" command would
not work if we have an Ethernet switch that does igmp snooping since
the switch would not replicate multicast packets on ports that did not
have IGMP reports for the multicast addresses.
Linux vxlan interfaces created via "ip link add vxlan" have the group option
that enables then to do the required join.
By extending ip address command with option "autojoin" we can get similar
functionality for openvswitch vxlan interfaces as well as other tunneling
mechanisms that need to receive multicast traffic.
example:
ip address add 224.1.1.10/24 dev eth5 autojoin
ip address del 224.1.1.10/24 dev eth5
This new attribute is now advertised by the kernel for x-netns interfaces.
It's also possible to set it when an interface is created (and thus creating a
x-netns interface with one single message).
Example:
$ ip netns add foo
$ ip netns add bar
$ ip -n foo netns set bar 15
$ ip -n foo link add ipip1 link-netnsid 15 type ipip remote 10.16.0.121 local 10.16.0.249
$ ip -n foo link ls ipip1
3: ipip1@NONE: <POINTOPOINT,NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default
link/ipip 10.16.0.249 peer 10.16.0.121 link-netnsid 15
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
"ip addr show up" would exclude the interface (link), but include the
addresses of down interfaces (which looked like they where indented
under a different interface). This fixes the filtering.
For a full example see the original bug report at:
http://bugs.debian.org/776040
Reported-by: Paul Slootman <paul@debian.org>
CC: 776040@bugs.debian.org
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
The issue was caused that ifla_vf_rate does not exist on
older kernels and should be checked if it exists as nested attr.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reported-by: William Dauchy <william@gandi.net>
Tested-by: William Dauchy <william@gandi.net>
Added new option 'type' to 'ip link show'
command which allows to filter devices by type:
ip link show type bridge
ip link show type vlan
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Sometimes it's needed to have "ip address show" list only addresses
with certain flags not being set, e.g. in network scripts.
As an example one might want to exclude addresses in "tentative"
or "deprecated" state.
Support listing addresses with flags tentative, deprecated, dadfailed
not being set by prefixing the respective flag with a minus.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
This option was used only for 'ip link', but it can be useful to have it for
'ip address'. Thus it is possible to display link details and addresses with one
command.
Example:
$ ip -d a ls dev gre1
9: gre1@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1468 qdisc noqueue state UNKNOWN group default
link/gre 10.16.0.249 peer 10.16.0.121 promiscuity 0
gre remote 10.16.0.121 local 10.16.0.249 ttl inherit ikey 0.0.0.10 okey 0.0.0.10 icsum ocsum
inet 192.168.0.249 peer 192.168.0.121/32 scope global gre1
valid_lft forever preferred_lft forever
inet6 fe80::5efe:a10:f9/64 scope link
valid_lft forever preferred_lft forever
Suggested-by: Christophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Make ip address show accept the -s option similarly to ip link. This creates
an one command replacement for "ifconfig -a" useful for people who still
stay with ifconfig because of this feature.
Print the stats as the last thing for the interface. This requires some code
shuffling.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
This patch avoids a full link wildump request when the user has specified
a single link. Uses RTM_GETLINK without the NLM_F_DUMP flag.
This helps on a system with large number of interfaces.
This patch currently only uses the link ifindex in the filter.
Hoping to provide a subsequent kernel patch to do link dump filtering on
other attributes in the kernel.
In iplink_get, to be safe, this patch currently sets the answer buffer
size to the max size that libnetlink rtnl_talk can copy. The current api
does not seem to provide a way to indicate the answer buf size.
changelog from RFC to v1:
- incorporated comments from stephen (fixed comment and fixed if/else block)
changelog from v1 to v2:
- fix whitespaces error
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
o "min_tx_rate" option has been added for minimum Tx rate. Hence, for
consistent naming, "max_tx_rate" option has been introduced for maximum
Tx rate.
o Change in v2: "rate" can be used along with "max_tx_rate".
When both are specified, "max_tx_rate" should override.
o Change in v3:
* IFLA_VF_RATE: When IFLA_VF_RATE is used, and user has given only one of
min_tx_rate or max_tx_rate, reading of previous rate limits is done in
userspace instead of in kernel space before ndo_set_vf_rate.
* IFLA_VF_TX_RATE: When IFLA_VF_TX_RATE is used, min_tx_rate is always read
in kernel space. This takes care of below scenarios:
(1) when old tool sends "rate" but kernel is new (expects min and max)
(2) when new tool sends only "rate" but kernel is old (expects only "rate")
o Change in v4 as suggested by Stephen Hemminger:
* As per iproute policy, input and output formats should match. Changing display
of max_tx_rate and min_tx_rate options accordingly.
./ip/ip link show p3p1
8: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
link/ether 00:0e:1e:16:ce:40 brd ff:ff:ff:ff:ff:ff
vf 0 MAC 2a:18:8f:4d:3d:d4, tx rate 700 (Mbps), max_tx_rate 700Mbps, min_tx_rate 200Mbps
vf 1 MAC 72:dc:ba:f9:df:fd
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Kernel is being extended to support flag IFA_F_MANAGETEMPADDR also for
deletion of addresses. This will allow a userspace application to indicate
that for a global address the kernel should delete all related temporary
addresses as well.
"ip addr del" internally calls ipaddr_modify which silently accepts
any flag provided on the command line already, independent of the
actual command.
Therefore only the usage documentation needs to be extended.
Signed-off-by: Heiner Kallweit <heiner.kallweit@web.de>
commit 37c9b94ed2 (add support for extended ifa_flags)
introduced a regression:
# ./ip/ip addr add 192.168.0.1/24 dev eth0
RTNETLINK answers: Invalid argument
This is due to old kernels don't support IFA_FLAGS flag, we should not
use it if we don't use the flags beyond old .ifa_flags.
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
As a system admin I occasionally want to be able to check that all
interfaces has a name in DNS or /etc/hosts file.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
This change adds the interface group to the output of "ip link show".
It also makes "ip link" print _all_ devices if no group filter is specified;
previously, only interfaces of the default group (0) were shown.
Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
Both ip-link and ip-address support the 'up' argument, however this
isn't documented in neither their help outputs or ip-address' manpage.
This patch fixes that.
Signed-off-by: Petr Šabata <contyk@redhat.com>
Reported-by: Jiří Popelka <jpopelka@redhat.com>
This patch improves many error messages as follows:
- For incorrect parameters, show the value of the offending parameter, rather than just say that it is incorrect
- Rephrased messages for clarity
- Rephrased to more `mainstream' english
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
This is useful to know the 'real' status of an interface (the flag IFF_PROMISC
is exported by the kernel only when the user set it explicitly, for example it
will not be exported when a tcpdump is running).
This information will be displayed when '-details' is provided by the user.
Example:
$ ip -d l l tun10
6: tun10: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN mode DEFAULT
link/sit 10.16.0.249 peer 10.16.0.121
sit remote 10.16.0.121 local 10.16.0.249 ttl inherit pmtudisc 6rd-prefix 2002::/16
promiscuity 2
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This functionality is required by checkpoint-restore project. Since the
dump and restore for routes is already done in ip tool it's naturally to
dump and restore addresses in the ip tool as well.
The implementation logic is the same as for the respective one for routes.
The magic number digits are taken from the Seattle coordinates.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
`ip a s` no longer shows addresses since 3.4.0 works, but 3.5.0,
the simple test case:
make clean && make -j -s && ./ip/ip a s lo
before that change, i would get:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
but after, i now get:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
seems like the bug was introduced in the middle of that patch:
- if (filter.family != AF_PACKET) {
+ if (filter.family && filter.family != AF_PACKET) {
+ if (filter.oneline)
+ no_link = 1;
+
if (rtnl_wilddump_request(&rth, filter.family, RTM_GETADDR) < 0) {
perror("Cannot send dump request");
exit(1);
if i revert the change to the if statement there, `ip a s` works for me again.
Alternative solution to problem reported by Pravin B Shelar <pshelar@nicira.com>
Split large function ipaddr_list_or_flush into components.
Fix memory leak of address and link nlmsg info.
Avoid fetching address info if only flushing.
ip link has quadratic behavior because store_nlmsg()
has a head list pointer and search the end of list.
Provides a head/tail to cut time.
Time with 128000 net devices, to do "ip link show dev xxx"
Before: 2m3.594s
After: 0m2.830s
Signed-off-by: Eric Dumazet <edumazet@google.com>
The kernel supports a link mode attribute (which can be dormant or default).
This attribute is used to control how the link watch engine
handles operstate transistion.
This adds a new parameter to ip link command to allow setting and
displaying the value.
---
Both rtnl_talk and rtnl_dump had a callback for handling portions
of netlink message that do not match the correct pid or seq.
But this callback was never used by any part of iproute2 so remove
it.
Add ip link command parsing for VF spoof checking enable/disable
V2 - Fixed problem with parsing of dump info on kernels that don't
support the spoof checking option and also wrapped the ifla_vf_info
structure in #ifdef __KERNEL__ to prevent user space from directly
accessing the structure
V3 - Improved parsing of vfinfo
V4 - Put Makefile back to proper list of subdirs
V5 - Remove struct ifla_vf_info, it is only used by the kernel
V6 - Make sure spoof check is reported by the driver - rtnl will set
it to -1 to indicate driver didn't report a value.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Eric Dumazet a écrit :
> We currently use an expensive ioctl() to get device txqueuelen, while
> rtnetlink gave it to us for free. This patch speeds up ip link operation
> when many devices are registered.
>
Here is a 2nd version od this patch, not displaying "qlen 0" useless info
[PATCH iproute2] ip: Support IFLA_TXQLEN in ip link show command
We currently use an expensive ioctl() to get device txqueuelen, while
rtnetlink gave it to us for free. This patch speeds up ip link operation
when many devices are registered.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Add the group keyword to ip link set, which has the following meaning:
If both a group and a device name are pressent, we change the device's
group to the specified one. If only a group is present, then the
operation specified by the rest of the command should apply on an entire
group, not a single device.
So, to set eth0 to the default group, one would use
ip link set dev eth0 group default
Conversely, to set all the devices in the default group down, use
ip link set group default down
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
User can specify device group to list by using the group keyword:
ip link show group test
If no group is specified, 0 (default) is implied.
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
This reverts commit 632110aa0d.
There seem to be some recent changes in the 802.1Qbh/bg specs which may
result in changes to this patch in the near future. It seems like its best
to ignore this patch for now.
I will re-spin at a later time when the changes in the specs converge.
BTW, Please let me know if I should CC netdev list and others on the
original email. I can resend this email.
Thanks,
Roopa
Resubmitting Scott Feldmans original patch with below changes
- Fix port profile strlen which was off by 1
- Added function to convert IFLA_PORT_RESPONSE codes to string
Add support for IFLA_VF_PORTS. VF port netlink msg layout is
[IFLA_NUM_VF]
[IFLA_VF_PORTS]
[IFLA_VF_PORT]
[IFLA_PORT_*], ...
[IFLA_VF_PORT]
[IFLA_PORT_*], ...
...
[IFLA_PORT_SELF]
[IFLA_PORT_*], ...
The iproute2 cmd line for link set is now:
Usage: ip link add link DEV [ name ] NAME
[ txqueuelen PACKETS ]
[ address LLADDR ]
[ broadcast LLADDR ]
[ mtu MTU ]
type TYPE [ ARGS ]
ip link delete DEV type TYPE [ ARGS ]
ip link set DEVICE [ { up | down } ]
[ arp { on | off } ]
[ dynamic { on | off } ]
[ multicast { on | off } ]
[ allmulticast { on | off } ]
[ promisc { on | off } ]
[ trailers { on | off } ]
[ txqueuelen PACKETS ]
[ name NEWNAME ]
[ address LLADDR ]
[ broadcast LLADDR ]
[ mtu MTU ]
[ netns PID ]
[ alias NAME ]
[ port MODE { PROFILE | VSI } ]
[ vf NUM [ mac LLADDR ]
[ vlan VLANID [ qos VLAN-QOS ] ]
[ rate TXRATE ]
[ port MODE { PROFILE | VSI } ] ]
ip link show [ DEVICE ]
TYPE := { vlan | veth | vcan | dummy | ifb | macvlan | can }
MODE := { assoc | preassoc | preassocrr | disassoc }
PROFILE := profile PROFILE
[ instance UUID ]
[ host UUID ]
VSI := vsi mgr MGRID type VTID ver VER
[ instance UUID ]
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
The default remains at 10 for backwards compatibility.
For instance:
# ip addr flush dev eth2
*** Flush remains incomplete after 10 rounds. ***
# ip -l 20 addr flush dev eth2
*** Flush remains incomplete after 20 rounds. ***
# ip -loops 0 addr flush dev eth2
#
This is useful for getting rid of large numbers of IP
addresses in scripts.
Signed-off-by: Ben Greear <greearb@candelatech.com>
The old 'ip addr flush' logic had several flaws:
* It reversed logic for primary v/s secondary flags
(though, it sort of worked right anyway)
* The code tried to remove secondaries and then primaries,
but in practice, it always removed one primary per loop,
which not at all efficient.
* The filter logic in the core would run only the first
filter in most cases.
* If you used '-s -s', the ifa_flags member would be
modified, which could make future filters fail
to function fine.
This patch attempts to fix all of these issues.
Tested-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
`ip -s link` shows interface counters truncated to 32 bit. This is
because interface statistics are transported only in 32-bit quantity
to userspace. This commit adds recognition for the new IFLA_STATS64
attribute that exports them in full 64 bit.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
The kernel interface changed just before 2.6.34 was released. This brings
iproute2 in line with the current changes. The VF portion of setlink is
comprised of a set of nested attributes.
IFLA_VFINFO_LIST (NESTED)
IFLA_VF_INFO (NESTED)
IFLA_VF_MAC
IFLA_VF_VLAN
IFLA_VF_TX_RATE
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Allow ip to process all the file passed with the -batch argument when
is passed also the -force switch
Signed-off-by: Michele Petrazzo <michele.petrazzo@unipex.it>
Add support to 'ip' for setting and showing SR-IOV virtual function
link parameters.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
IPv6 addresses that have IFA_F_SECONDARY set are actually temporary addresses,
hence the IFA_F_TEMPORARY equivalent. Change the output in this case and
allow filtering on the word "temporary".
Signed-off-by: Brian Haley <brian.haley@hp.com>
Unless promote_secondaries has been active deleting the primary address of
an interface will automatically delete all the secondary addresses.
In the case where ip flush requests the primary then secondary addresses to
be removed - which is the order the addresses are returned by the kernel -
this will cause an error as by the time the request to remove a secondary
address is made it will be missing as it will have been deleted in the
course of deleting the primary address.
This approach to solving this problem orders requests for the
deletion of secondary addresses before primary ones providing
rtnl_dump_filter_l(), a version of rtnl_dump_filter() that
iterates over a list of filters. And by providing two specialised
filters print_addrinfo_secondary() and print_addrinfo_primary().
rtnl_dump_filter_l() first iterates over all addresses using
print_addrinfo_secondary(), which appends secondary addresses to the
request buffer. Then again using print_addrinfo_primary() which appends
primary addresses.
This approach should work regardless of it promote_secondaries is
active or not. And regardless of if any primary of secondary addresses
are present or not.
Signed-off-by: Simon Horman <horms@verge.net.au>
Add IFA_F_DADFAILED flag to denote an IPv6 address that has
failed Duplicate Address Detection, that way tools like
/sbin/ip can be more informative.
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
inet6 2001:db8::1/64 scope global tentative dadfailed
valid_lft forever preferred_lft forever
Signed-off-by: Brian Haley <brian.haley@hp.com>
t's not a big problem, but it makes a better show in 'ip link show' on
CAN interfaces :-)
I also moved __PF(CAN,can) in ll_proto.c to the same position where it
can be found in if_ether.h .
The only thing i did not know if the __PF(CAN,can) in ll_types.c needs
to be put in #ifdef ARPHDR_CAN like __PF(HWX25,hwx25) is or not. You
definitely know that better than me.
patch attached this time..
On Fri, 2008-08-08 at 10:01 -0400, jamal wrote:
> wireless drivers using wext is a prime example if you need a test case.
>
> cheers,
> jamal
ip: Allow for easier debug of buggy devices that dont send their names
With the old message couldnt tell which device had the bug.
This patch provides at least an ifindex to narrow it down.
Theres also no point in bailing out because of one bug; we
allow it to go on so we could dump as much info as we can
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Stephen Hemminger
Bjørn Mork
Hannes Frederic Sowa
Phil Sutter
Neil Horman
Christoph Schulz
David Ahern
Stephen Hemminger
Andy Gospodarek
Pavel Šimerda
Anuradha Karuppiah
Jiri Pirko
Eran Ben Elisha
Nicolas Dichtel
Mathias Nyman
Madhu Challa
Andreas Henriksson
Vadim Kochan
Heiner Kallweit
Christian Hesse
Jiri Benc
Roopa Prabhu
Sucheta Chakraborty
david decotigny
Heiner Kallweit
WANG Cong
Thomas Haller
Sami Kerola
Stefan Tomanek
Rony Efraim
Petr Šabata
Kees van Reeuwijk
Strake
Petr Písař
Pavel Emelyanov
Dan Kenigsberg
Mike Frysinger
Stephen Hemminger
Eric Dumazet
Stephen Hemminger
Greg Rose
Eric Dumazet
Vlad Dogaru
Roopa Prabhu
Ben Greear
Andreas Schwab
Jan Engelhardt
Chris Wright
Michele Petrazzo - Unipex
Williams, Mitch A
Brian Haley
Simon Horman
Oliver Hartkopp
jamal