Update kernel headers to commit:
c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload")
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit:
c23fcbbc6aa4 ("tc-testing: added tests with cookie for conntrack TC action")
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement addition/deletion of lists of properties, currently
alternative ifnames. Also extent the ip link show command to list them.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The _PRINT_FUNC() macro expands to a function call.
Putting a semi-colon is unnecessary and causes warnings with -pedantic
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
iproute has an utility function which checks if a string is a prefix for
another one, to allow use of abbreviated commands, e.g. 'addr' or 'a'
instead of 'address'.
This routine unfortunately considers an empty string as prefix
of any pattern, leading to undefined behaviour when an empty
argument is passed to ip:
# ip ''
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
# tc ''
qdisc noqueue 0: dev lo root refcnt 2
# ip address add 192.0.2.0/24 '' 198.51.100.1 dev dummy0
# ip addr show dev dummy0
6: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 02:9d:5e:e9:3f:c0 brd ff:ff:ff:ff:ff:ff
inet 192.0.2.0/24 brd 198.51.100.1 scope global dummy0
valid_lft forever preferred_lft forever
Rewrite matches() so it takes care of an empty input, and doesn't
scan the input strings three times: the actual implementation
does 2 strlen and a memcpy to accomplish the same task.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Import tc_mpls.h uapi header from kernel headers at commit:
1ff2f0fa450e ("net/mlx5e: Return in default case statement in tx_post_resync_params")
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit:
1ff2f0fa450e ("net/mlx5e: Return in default case statement in tx_post_resync_params")
import include/uapi/linux/const.h per new dependency in
include/uapi/linux/pkt_cls.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
iptables commit 933400b37d09 ("nft: xtables: add the infrastructure to translate from iptables to nft")
added an additional member to struct xtables_match and struct xtables_target.
This change is available for libxtables12 and up.
Add these members conditionally to support both newer and older versions.
Fixes: dd29621578 ("tc: add em_ipt ematch for calling xtables matches from tc matching context")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The netns_{save,restore} functions are only used in ipnetns.c now, since
the restore is not needed anymore after the netns exec command.
Move them in ipnetns.c, and make them static.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
'ip netns exec' changes the current netns just before executing a child
process, and restores it after forking. This is needed if we're running
in batch or do_all mode.
Some cleanups must be done both in the parent and in the child: the
parent must restore the previous netns, while the child must reset any
VRF association.
Unfortunately, if do_all is set, the VRF are not reset in the child, and
the spawned processes are started with the wrong VRF context. This can
be triggered with this script:
# ip -b - <<-'EOF'
link add type vrf table 100
link set vrf0 up
link add type dummy
link set dummy0 vrf vrf0 up
netns add ns1
EOF
# ip -all -b - <<-'EOF'
vrf exec vrf0 true
netns exec setsid -f sleep 1h
EOF
# ip vrf pids vrf0
314 sleep
# ps 314
PID TTY STAT TIME COMMAND
314 ? Ss 0:00 sleep 1h
Refactor cmd_exec() and pass to it a function pointer which is called in
the child before the final exec. In the netns exec case the function just
resets the VRF and switches netns.
Doing it in the child is less error prone and safer, because the parent
environment is always kept unaltered.
After this refactor some utility functions became unused, so remove them.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add a new parameter '-Numeric' to show the number of protocol, scope,
dsfield, etc directly instead of converting it to human readable name.
Do the same on tc and ss.
This patch is based on David Ahern's previous patch.
Suggested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Devlink commands which implements the dumpit callback may return error.
The netlink function netlink_dump() sends the errno value as the payload
of the message, while answering user space with NLMSG_DONE.
To enable receiving errno value for dumpit commands we have to check for
it in the message. If it is a negative value then the dump returned an
error so we should set errno accordingly and check for ext_ack in case
it was set.
Fixes: 049c58539f ("devlink: mnlg: Add support for extended ack")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
groups > 31 have to be joined using the setsockopt. Since the nexthop
group is 32, add a helper to allow 'ip monitor' to listen for nexthop
messages.
Signed-off-by: David Ahern <dsahern@gmail.com>
When creating a new netns or executing a program into an existing one,
the unshare() or setns() calls will change the current netns.
In batch mode, this can run commands on the wrong interfaces, as the
ifindex value is meaningful only in the current netns. For example, this
command fails because veth-c doesn't exists in the init netns:
# ip -b - <<-'EOF'
netns add client
link add name veth-c type veth peer veth-s netns client
addr add 192.168.2.1/24 dev veth-c
EOF
Cannot find device "veth-c"
Command failed -:7
But if there are two devices with the same name in the init and new netns,
ip will build a wrong ll_map with indexes belonging to the new netns,
and will execute actions in the init netns using this wrong mapping.
This script will flush all eth0 addresses and bring it down, as it has
the same ifindex of veth0 in the new netns:
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.76/24 brd 192.168.122.255 scope global dynamic eth0
valid_lft 3598sec preferred_lft 3598sec
# ip -b - <<-'EOF'
netns add client
link add name veth0 type veth peer name veth1
link add name veth-ns type veth peer name veth0 netns client
link set veth0 down
address flush veth0
EOF
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
3: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether c2:db:d0:34:13:4a brd ff:ff:ff:ff:ff:ff
4: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether ca:9d:6b:5f:5f:8f brd ff:ff:ff:ff:ff:ff
5: veth-ns@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 32:ef:22:df:51:0a brd ff:ff:ff:ff:ff:ff link-netns client
The same issue can be triggered by the netns exec subcommand with a
sligthy different script:
# ip netns add client
# ip -b - <<-'EOF'
netns exec client true
link add name veth0 type veth peer name veth1
link add name veth-ns type veth peer name veth0 netns client
link set veth0 down
address flush veth0
EOF
Fix this by adding two netns_{save,reset} functions, which are used
to get a file descriptor for the init netns, and restore it after
each batch command.
netns_save() is called before the unshare() or setns(),
while netns_restore() is called after each command.
Fixes: 0dc34c7713 ("iproute2: Add processless network namespace support")
Reviewed-and-tested-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
David Ahern
Stephen Hemminger
Jiri Pirko
Nicolas Dichtel
David Ahern
Matteo Croce
Andrea Claudi
Eyal Birger
Hangbin Liu
Moshe Shemesh