Alternative solution to problem reported by Pravin B Shelar <pshelar@nicira.com>
Split large function ipaddr_list_or_flush into components.
Fix memory leak of address and link nlmsg info.
Avoid fetching address info if only flushing.
ip link has quadratic behavior because store_nlmsg()
has a head list pointer and search the end of list.
Provides a head/tail to cut time.
Time with 128000 net devices, to do "ip link show dev xxx"
Before: 2m3.594s
After: 0m2.830s
Signed-off-by: Eric Dumazet <edumazet@google.com>
Adds support for parsing IPv6 addresses to the parameters local and
remote in the l2tp commands. Requires netlink attributes L2TP_ATTR_IP6_SADDR
and L2TP_ATTR_IP6_DADDR, added in a required kernel patch already submitted
to netdev.
Also enables printing of IPv6 addresses returned by the L2TP_CMD_TUNNEL_GET
request.
Signed-off-by: Chris Elston <celston@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Reported by Robert Henney:
> the 'ip' man page does not mention the command "del" at all but does
> claim, "As a rule, it is possible to add, delete and show (or list ) objects".
> however, 'ip' does not always recognize "delete" as a commend.
>
> robh@debian:~$ ip tunnel delete
> Command "delete" is unknown, try "ip tunnel help".
Lets use "delete" in all calls to matches() for consistency. This will
make both "del" and "delete" work everywhere.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Adds support for parsing IPv6 addresses to the parameters local and
remote in the l2tp commands. Requires netlink attributes L2TP_ATTR_IP6_SADDR
and L2TP_ATTR_IP6_DADDR, added in a required kernel patch already submitted
to netdev.
Also enables printing of IPv6 addresses returned by the L2TP_CMD_TUNNEL_GET
request.
Signed-off-by: Chris Elston <celston@katalix.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Define where is the are located the iproute2 config files.
Get rid of trailing slashes for paths in several file.
Signed-off-by: Christoph J. Thompson <cjsthompson@gmail.com>
Hi,
I've attached a trivial patch for iproute2 to allow naming interfaces
created with "ip l2tp add session".
I believe patches should go through the netdev mailing list but this
patch is so small I figured that would just add noise. Hope that's OK.
Originally I thought I would need a bigger patch and was going to take a
stab at implementing something like
ip l2tp add tunnel L2TP_TUNNEL_ARGS
ip link add name NAME [ LINK_OPTS ] type l2tp L2TP_SESSION_ARGS
(a better interface IMHO) but all the code was there already, all that I
needed to add was option parsing.
Thanks,
João Valverde
From fd8c3b712527d2e959aeabc6f6b71a9910e7be7e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Jo=C3=A3o=20Valverde?= <joao.valverde@ist.utl.pt>
Date: Mon, 26 Mar 2012 18:30:56 +0100
Subject: [PATCH] ipl2tp: allow setting session interface name
The kernel supports a link mode attribute (which can be dormant or default).
This attribute is used to control how the link watch engine
handles operstate transistion.
This adds a new parameter to ip link command to allow setting and
displaying the value.
---
There is nothing in the standard that says 0 can't be used as a key.
It makes sense to allow it. Also fix typo where ikey was printed for
when printing okey.
Change the order of evaluation of ip link type arguements to allow
changing parameters of gre tunnels.
The following wouldn't work:
# ip li add mytunnel type gretap remote 1.1.1.1 key 3
# ip li set mytunnel type gretap key 9
LIBNETLINK will be defined in the main Makefile, so
both ../lib/libnetlink.a ../lib/libutil.a will be
automatically appended during linking. Otherwise
../lib/libnetlink.a ../lib/libutil.a will appear
twice during linking.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
New "ip neigh show proxy" command now can show proxies which
were added with "ip neigh add proxy" command. Kernel code to
support this feature sent a bit earlier to netdev.
Signed-off-by: Tony Zelenoff <antonz@parallels.com>
Both rtnl_talk and rtnl_dump had a callback for handling portions
of netlink message that do not match the correct pid or seq.
But this callback was never used by any part of iproute2 so remove
it.
Add ip link command parsing for VF spoof checking enable/disable
V2 - Fixed problem with parsing of dump info on kernels that don't
support the spoof checking option and also wrapped the ifla_vf_info
structure in #ifdef __KERNEL__ to prevent user space from directly
accessing the structure
V3 - Improved parsing of vfinfo
V4 - Put Makefile back to proper list of subdirs
V5 - Remove struct ifla_vf_info, it is only used by the kernel
V6 - Make sure spoof check is reported by the driver - rtnl will set
it to -1 to indicate driver didn't report a value.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alternative fix to problem reported by: Bin Li
The issue is came from https://bugzilla.novell.com/show_bug.cgi?id=681952.
In any previous version (since suse ... 10.0?), ip addr add always returned
the error code 2 in case the ip address is already set on the interface:
inet 172.16.2.3/24 brd 172.16.2.255 scope global bond0
RTNETLINK answers: File exists
2
On 11.4, it returns the exit code 254:
inet 172.16.1.1/24 brd 172.16.1.255 scope global eth0
RTNETLINK answers: File exists
254
This of course causes ifup to return an error in this quite common case..
When changing ip6ip6 parameters (ip -6 tun change), ip passes zeroed
struct ip6_tnl_parm to the kernel. The kernel then tries to change all of
the tunnel parameters to the passed values, including zeroing of local and
remote address. This fails (-EEXIST in net/ipv6/ip6_tunnel.c:ip6_tnl_ioctl).
For other tunnel types, ip fetches the current parameters first and applies
the required changes on top of them. This patch applies the same code as in
ip/iptunnel.c to ip/ip6tunnel.c.
See http://bugzilla.redhat.com/730627 for the original bug report.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Add bridge as a supported type with 'ip link' in usage and all the missing
types in 'ip' man page. Also fixed some typos.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Use O_EXCL so that we only create and mount a new network namespace
if there is no chance an existing network namespace is present.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
If libc has setns present use that version instead of
rolling the syscall wrapper by hand.
Dan McGee found the following compile error:
gcc -D_GNU_SOURCE -O2 -Wstrict-prototypes -Wall -I../include
-DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib/\" -c -o ipnetns.o ipnetns.c
ipnetns.c:31:12: error: static declaration of ‘setns’ follows non-static
declaration
/usr/include/bits/sched.h:93:12: note: previous declaration of ‘setns’
was here
make[1]: *** [ipnetns.o] Error 1
Reported-by: Dan McGee <dan@archlinux.org>
Tested-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
$ ip route help 2>&1 | grep monitor
ip route { add | del | change | append | replace | monitor } ROUTE
$ ip route monitor
Command "monitor" is unknown, try "ip route help".
(I guess what was really intended is "ip monitor route", so just remove
the argument from the help output.)
Originally reported by martin f krafft at http://bugs.debian.org/537681
While at it, also drop all non-existant (route,link,netns) monitor
arguments from the ip(8) man page.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
The goal of this code change is to implement a mechanism such that it is
simple to work with a kernel that is using multiple network namespaces
at once.
This comes in handy for interacting with vpns where there may be rfc1918
address overlaps, and different policies default routes, name servers
and the like.
Configuration specific to a network namespace that would ordinarily be
stored under /etc/ is stored under /etc/netns/<name>. For example if
the dns server configuration is different for your vpn you would create
a file /etc/netns/myvpn/resolv.conf.
File descriptors that can be used to manipulate a network namespace can
be created by opening /var/run/netns/<NAME>.
This adds the following commands to iproute.
ip netns add NAME
ip netns delete NAME
ip netns monitor
ip netns list
ip netns exec NAME cmd ....
ip link set DEV netns NAME
ip netns exec exists to cater the vast majority of programs that only
know how to operate in a single network namespace. ip netns exec
changes the default network namespace, creates a new mount namespace,
remounts /sys and bind mounts netns specific configuration files to
their standard locations.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The ip(8) man page and the "ip xfrm [ XFRM-OBJECT ] help" command output
are updated to include missing options, fix errors, and improve grammar.
There are no functional changes made.
The documentation for the ip command has many different meanings for the
same formatting symbols (which really needs to be fixed). This patch makes
consistent use of brackets [ ] to indicate optional parameters, pipes | to
mean "OR", braces { } to group things together, and dashes - instead of
underscores _ inside of parameter names. The parameters are listed in the
order in which they are parsed in the source code.
There are several parameters and options that are still not mentioned or
need to be described more thoroughly in the "COMMAND SYNTAX" section of
the ip(8) man page. I would appreciate help from the developers with this.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Eric Dumazet a écrit :
> We currently use an expensive ioctl() to get device txqueuelen, while
> rtnetlink gave it to us for free. This patch speeds up ip link operation
> when many devices are registered.
>
Here is a 2nd version od this patch, not displaying "qlen 0" useless info
[PATCH iproute2] ip: Support IFLA_TXQLEN in ip link show command
We currently use an expensive ioctl() to get device txqueuelen, while
rtnetlink gave it to us for free. This patch speeds up ip link operation
when many devices are registered.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
If the continue is taken, then there is a memory leak.
https://bugzilla.novell.com/show_bug.cgi?id=538996
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Brandon Philips <bphilips@suse.de>
User can specify device group to list by using the group keyword:
ip link show group test
If no group is specified, 0 (default) is implied.
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
Hi,
here is a patch against iproute2 to allow user to set a state with a specific
auth length.
Example:
$ ip xfrm state add src 10.16.0.72 dst 10.16.0.121 proto ah spi 0x10000000
auth-trunc "sha256" "azertyuiopqsdfghjklmwxcvbn123456" 96 mode tunnel
$ ip xfrm state
src 10.16.0.72 dst 10.16.0.121
proto ah spi 0x10000000 reqid 0 mode tunnel
replay-window 0
auth-trunc hmac(sha256)
0x617a6572747975696f707173646667686a6b6c6d77786376626e313233343536 96
sel src 0.0.0.0/0 dst 0.0.0.0/0
Regards,
Nicolas
>From 522ed7348cdf3b6f501af2a5a5d989de1696565a Mon Sep 17 00:00:00 2001
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Date: Thu, 23 Dec 2010 06:48:12 -0500
Subject: [PATCH] iproute2: allow to specify truncation bits on auth algo
Attribute XFRMA_ALG_AUTH_TRUNC can be used to specify
truncation bits, so we add a new algo type: auth-trunc.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The get_jiffies() function retrieves rtt-type values in units of
milliseconds. This patch updates the function name accordingly,
following the pattern given by dst_metric() <=> dst_metric_rtt().
Since July 2008 (2.6.27, c1e20f7c8b9), the kernel stores the values for
RTAX_{RTT{,VAR},RTO_MIN} in milliseconds. When using a kernel > 2.6.27 with
the current iproute2, conversion of these values is broken in either way.
This patch
* updates the code to pass and retrieve milliseconds;
* since values < 1msec would be rounded up, also drops the usec/nsec variants;
* since there is no way to query kernel HZ, also drops the jiffies variant.
Arguments such as
rtt 3.23sec
rto_min 0xff
rto_min 0.200s
rttvar 25ms
now all work as expected when reading back previously set values.
In the Linux kernel, ipsec policy and SAs can include a
security context to support MAC networking. This feature
is often referred to as "labeled ipsec".
This patchset adds security context support into ip xfrm
such that a security context can be included when
add/delete/display SAs and policies with the ip command.
The user provides the security context when adding
SAs and policies. If a policy or SA contains a security
context, the changes allow the security context to be displayed.
For example,
ip xfrm state
src 10.1.1.6 dst 10.1.1.2
proto esp spi 0x00000301 reqid 0 mode transport
replay-window 0
auth hmac(digest_null) 0x3078
enc cbc(des3_ede) 0x6970763672656164796c6f676f33646573636263696e3031
security context root:system_r:unconfined_t:s0
Please let me know if all is ok with the patchset.
Thanks!!
regards,
Joy
Signed-off-by: Joy Latten <latten@austin.ibm.com>
Add support for 'passthru' mode when creating a macvlan/macvtap device
which allows takeover of the underlying device and passing it to a KVM
guest using virtio with macvtap backend.
Only one macvlan device is allowed in passthru mode and it inherits
the mac address from the underlying device and sets it in promiscuous
mode to receive and forward all the packets.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Hi,
here is a patch against iproute2 to allow user to set a state with a specific
auth length.
Example:
$ ip xfrm state add src 10.16.0.72 dst 10.16.0.121 proto ah spi 0x10000000
auth-trunc "sha256" "azertyuiopqsdfghjklmwxcvbn123456" 96 mode tunnel
$ ip xfrm state
src 10.16.0.72 dst 10.16.0.121
proto ah spi 0x10000000 reqid 0 mode tunnel
replay-window 0
auth-trunc hmac(sha256)
0x617a6572747975696f707173646667686a6b6c6d77786376626e313233343536 96
sel src 0.0.0.0/0 dst 0.0.0.0/0
Regards,
Nicolas
>From 522ed7348cdf3b6f501af2a5a5d989de1696565a Mon Sep 17 00:00:00 2001
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Date: Thu, 23 Dec 2010 06:48:12 -0500
Subject: [PATCH] iproute2: allow to specify truncation bits on auth algo
Attribute XFRMA_ALG_AUTH_TRUNC can be used to specify
truncation bits, so we add a new algo type: auth-trunc.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The get_jiffies() function retrieves rtt-type values in units of
milliseconds. This patch updates the function name accordingly,
following the pattern given by dst_metric() <=> dst_metric_rtt().
Since July 2008 (2.6.27, c1e20f7c8b9), the kernel stores the values for
RTAX_{RTT{,VAR},RTO_MIN} in milliseconds. When using a kernel > 2.6.27 with
the current iproute2, conversion of these values is broken in either way.
This patch
* updates the code to pass and retrieve milliseconds;
* since values < 1msec would be rounded up, also drops the usec/nsec variants;
* since there is no way to query kernel HZ, also drops the jiffies variant.
Arguments such as
rtt 3.23sec
rto_min 0xff
rto_min 0.200s
rttvar 25ms
now all work as expected when reading back previously set values.
In the Linux kernel, ipsec policy and SAs can include a
security context to support MAC networking. This feature
is often referred to as "labeled ipsec".
This patchset adds security context support into ip xfrm
such that a security context can be included when
add/delete/display SAs and policies with the ip command.
The user provides the security context when adding
SAs and policies. If a policy or SA contains a security
context, the changes allow the security context to be displayed.
For example,
ip xfrm state
src 10.1.1.6 dst 10.1.1.2
proto esp spi 0x00000301 reqid 0 mode transport
replay-window 0
auth hmac(digest_null) 0x3078
enc cbc(des3_ede) 0x6970763672656164796c6f676f33646573636263696e3031
security context root:system_r:unconfined_t:s0
Please let me know if all is ok with the patchset.
Thanks!!
regards,
Joy
Signed-off-by: Joy Latten <latten@austin.ibm.com>
Add the group keyword to ip link set, which has the following meaning:
If both a group and a device name are pressent, we change the device's
group to the specified one. If only a group is present, then the
operation specified by the rest of the command should apply on an entire
group, not a single device.
So, to set eth0 to the default group, one would use
ip link set dev eth0 group default
Conversely, to set all the devices in the default group down, use
ip link set group default down
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
Add the group keyword to ip link set, which has the following meaning:
If both a group and a device name are pressent, we change the device's
group to the specified one. If only a group is present, then the
operation specified by the rest of the command should apply on an entire
group, not a single device.
So, to set eth0 to the default group, one would use
ip link set dev eth0 group default
Conversely, to set all the devices in the default group down, use
ip link set group default down
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
User can specify device group to list by using the group keyword:
ip link show group test
If no group is specified, 0 (default) is implied.
Signed-off-by: Vlad Dogaru <ddvlad@rosedu.org>
This reverts commit 632110aa0d.
There seem to be some recent changes in the 802.1Qbh/bg specs which may
result in changes to this patch in the near future. It seems like its best
to ignore this patch for now.
I will re-spin at a later time when the changes in the specs converge.
BTW, Please let me know if I should CC netdev list and others on the
original email. I can resend this email.
Thanks,
Roopa
Resubmitting Scott Feldmans original patch with below changes
- Fix port profile strlen which was off by 1
- Added function to convert IFLA_PORT_RESPONSE codes to string
Add support for IFLA_VF_PORTS. VF port netlink msg layout is
[IFLA_NUM_VF]
[IFLA_VF_PORTS]
[IFLA_VF_PORT]
[IFLA_PORT_*], ...
[IFLA_VF_PORT]
[IFLA_PORT_*], ...
...
[IFLA_PORT_SELF]
[IFLA_PORT_*], ...
The iproute2 cmd line for link set is now:
Usage: ip link add link DEV [ name ] NAME
[ txqueuelen PACKETS ]
[ address LLADDR ]
[ broadcast LLADDR ]
[ mtu MTU ]
type TYPE [ ARGS ]
ip link delete DEV type TYPE [ ARGS ]
ip link set DEVICE [ { up | down } ]
[ arp { on | off } ]
[ dynamic { on | off } ]
[ multicast { on | off } ]
[ allmulticast { on | off } ]
[ promisc { on | off } ]
[ trailers { on | off } ]
[ txqueuelen PACKETS ]
[ name NEWNAME ]
[ address LLADDR ]
[ broadcast LLADDR ]
[ mtu MTU ]
[ netns PID ]
[ alias NAME ]
[ port MODE { PROFILE | VSI } ]
[ vf NUM [ mac LLADDR ]
[ vlan VLANID [ qos VLAN-QOS ] ]
[ rate TXRATE ]
[ port MODE { PROFILE | VSI } ] ]
ip link show [ DEVICE ]
TYPE := { vlan | veth | vcan | dummy | ifb | macvlan | can }
MODE := { assoc | preassoc | preassocrr | disassoc }
PROFILE := profile PROFILE
[ instance UUID ]
[ host UUID ]
VSI := vsi mgr MGRID type VTID ver VER
[ instance UUID ]
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
This patch adds save and restore commands to "ip route". Save dumps
the RTNL stream to stdout which can then be passed to restore later.
This may be helpful in some normal situations, and will allow C/R to
migrate the routing information in userspace. Tweaking of the stream
can be done by userspace helpers to convert between versions and adjust
things like device indexes when restoring routes in a different
environment.
By factoring out some of the common bits of print_route() into
filter_nlmsg(), the "save" command can use the same selection logic
as "list," allowing the caller to save only specific routes as
necessary.
The only change since the RFC is the addition of manpage and doc
material.
Signed-off-by: Dan Smith <danms@us.ibm.com>
The default remains at 10 for backwards compatibility.
For instance:
# ip addr flush dev eth2
*** Flush remains incomplete after 10 rounds. ***
# ip -l 20 addr flush dev eth2
*** Flush remains incomplete after 20 rounds. ***
# ip -loops 0 addr flush dev eth2
#
This is useful for getting rid of large numbers of IP
addresses in scripts.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Add support for 'mode' parameter when creating a macvtap device.
This allows a macvtap device to be created in bridge, private or
the default vepa modes.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
-------------------------------------------------------------------
Acked-by: Arnd Bergmann <arnd@arndb.de>
Print GRE key as a regular number. It is not really an IPv4 address
and this is also how Cisco and Juniper treats GRE keys. Do keep the
parsing of dotted-quad format for backwards compatibility.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Adds support for RTA_MARK rt attribute added in linux-2.6.36
$ ip route get ADDR mark 4
192.168.20.110 dev eth1 src 192.168.20.108 mark 4
cache mtu 1500 advmss 1460 hoplimit 64
$ ip route get 192.168.20.108 from ADDR iif STRING mark 256
local 192.168.20.108 from 192.168.20.110 dev lo src 192.168.20.108 mark 0x100
cache <local,src-direct> iif eth1
$ ip route list cache [ADDR] mark NUMBER
Hexadecimal output if mark >= 16
null marks are not displayed.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
iproute_get will return cloned routes for IPv4
and cloned as well non-cloned routes for IPv6.
Therefore RTM_F_CLONED flag should not be checked
for iproute_get routes. Check in print_route will
always fail because valid values are 0 and 1.
Signed-off-by: Ulrich Weber <uweber@astaro.com>
The old 'ip addr flush' logic had several flaws:
* It reversed logic for primary v/s secondary flags
(though, it sort of worked right anyway)
* The code tried to remove secondaries and then primaries,
but in practice, it always removed one primary per loop,
which not at all efficient.
* The filter logic in the core would run only the first
filter in most cases.
* If you used '-s -s', the ifa_flags member would be
modified, which could make future filters fail
to function fine.
This patch attempts to fix all of these issues.
Tested-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
The do_multirule logic was broken in batch mode because
it expected the preferred_family to be AF_INET or AF_INET6,
but it then assigned it to RTNL_FAMILY_IPMR or RTNL_FAMILY_IP6MR.
So, the next iteration of the batch processing, it failed
the check for AF_INET or AF_INET6.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Before IPv6 routing cache entries were always displayed
if additional tables beside MAIN and LOCAL are installed.
Signed-off-by: Ulrich Weber <uweber@astaro.com>
`ip -s link` shows interface counters truncated to 32 bit. This is
because interface statistics are transported only in 32-bit quantity
to userspace. This commit adds recognition for the new IFLA_STATS64
attribute that exports them in full 64 bit.
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
The kernel interface changed just before 2.6.34 was released. This brings
iproute2 in line with the current changes. The VF portion of setlink is
comprised of a set of nested attributes.
IFLA_VFINFO_LIST (NESTED)
IFLA_VF_INFO (NESTED)
IFLA_VF_MAC
IFLA_VF_VLAN
IFLA_VF_TX_RATE
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
ip addrlabel outputs if%d names due to missing init call:
$ ip addrlabel s
prefix a::42/128 dev if4 label 1000
Also, ip did not accept "if%d" interfaces on input.
Signed-off-by: Florian Westphal <fw@strlen.de>
This patch fix two issues:
* If kernel is not supporting 6rd then ioctl() call
will return EINVAL, if so just skip perror call.
* 6rd scope is ipv6/ip tunnels. Dont try to fetch
6rd tunnel parms if tunnel protocol != IPPROTO_IPV6.
Signed-off-by: Alexandre Cassen <acassen@freebox.fr>
Allow ip to process all the file passed with the -batch argument when
is passed also the -force switch
Signed-off-by: Michele Petrazzo <michele.petrazzo@unipex.it>
This patch uses the new features of the kernel's netlink CAN interface
making the bus-error reporting configurable and allowing to retrieve
the CAN TX and RX bus error counters via netlink interface. Here is the
output of my test session showing how to use them:
# ip link set can0 up type can bitrate 500000 berr-reporting on
# ip -d -s link show can0
2: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UNKNOWN qlen 10
link/can
can <BERR-REPORTING> state ERROR-PASSIVE (berr-counter tx 128 rx 0) restart-ms 0
CAN bus error counter values ^^^^^^^^^^^
bitrate 500000 sample-point 0.875
tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1
sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
clock 8000000
re-started bus-errors arbit-lost error-warn error-pass bus-off
0 54101 0 1 1 0
RX: bytes packets errors dropped overrun mcast
432808 54101 54101 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
# ifconfig can0 down
# ip link set can0 up type can berr-reporting off
# candump -t d any,0:0,#FFFFFFFF
(0.000000) can0 20000004 [8] 00 08 00 00 00 00 60 00 ERRORFRAME
(0.000474) can0 20000004 [8] 00 20 00 00 00 00 80 00 ERRORFRAME
^^ ^^
\ \___ rxerr
\_____ txerr
Furthermore, the missing support for one-shot mode has been added.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Add support to 'ip' for setting and showing SR-IOV virtual function
link parameters.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add initrwnd option parsing to iproute. This option uses the new
rtnetlink init_rcvwnd to set the TCP initial receive window size
advertised by passive and active TCP connections.
Signed-off-by: Laurent Chavey <chavey@google.com>
This patch provides iproute2 facilities to configure 6rd tunnel. To
configure a 6rd tunnel, you need to configure a sit tunnel and set
6rd prefix as following :
ip tunnel add sit1 mode sit local a.b.c.d ttl 64
ip tunnel 6rd dev sit1 6rd-prefix xxxx:yyyy::/z
Optionally you can provide a relay prefix :
ip tunnel 6rd dev sit1 6rd-relay_prefix e.f.g.h/i
Finally you can reset previous tunnel settings :
ip tunnel 6rd dev sit1 6rd-reset
Signed-off-by: Alexandre Cassen <acassen@freebox.fr>
IPv6 addresses that have IFA_F_SECONDARY set are actually temporary addresses,
hence the IFA_F_TEMPORARY equivalent. Change the output in this case and
allow filtering on the word "temporary".
Signed-off-by: Brian Haley <brian.haley@hp.com>
Currently you can configure "equalize" and it looks all fine and dandy.
The kernel has the interface defined, but apparently there's never actually
been any implementation for it (only a never merged patch in the 2.4 era).
I'm suggesting to drop the code to give any potential users of this feature
the benefit of receiving a proper error message. I see it unlikely that
this will be implemented in the near future, but if it ever happens
reviving the iproute2 side should be as easy as git revert this patch.
For more details see http://bugs.debian.org/149897
Allow tmpl IP addresses to have a different family than
selector addresses. This is useful in conjunction with
XFRM_STATE_AF_UNSPEC.
Signed-off-by: Alex Badea <abadea@ixiacom.com>
Macvlan can now optionally support forwarding between its
ports, if they are in "bridge" mode. This adds support
for this option to "ip link add", "ip link set" and "ip
-d link show".
The default mode in the kernel is now "vepa" mode, meaning
"virtual ethernet port aggregator". This mode is used
together with the "hairpin" mode of an ethernet bridge
that the parent of the macvlan device is connected to.
All frames still get sent out to the external interface,
but the adjacent bridge is able to send them back on
the same wire in hairpin mode, so the macvlan ports
are able to see each other, which the bridge can be
configured to monitor and control traffic between
all macvlan instances. Multicast traffic coming in
from the external interface is checked for the source
MAC address and only delivered to ports that have not
yet seen it.
In bridge mode, macvlan will send all multicast traffic
to other interfaces that are also in bridge mode but
not to those in vepa mode, which get them on the way
back from the hairpin.
The third supported mode is "private", which prevents
communication between macvlans even if the adjacent
bridge is in hairpin mode. This behavior is closer to
the original implementation of macvlan but stricly
maintains isolation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
David Miller wrote:
> From: Patrick McHardy <kaber@trash.net>
> Date: Mon, 30 Nov 2009 19:00:14 +0100
>
>> This patch contains iproute support for iprule oif classification
>> for the send-to-self RFC I just sent out.
>
> Patrick, you need to submit a new version of this patch with
> the FIB_RULE_* macro fixed, just like the kernel version got
> fixed.
Thanks for reminind me of this. New patch attached.
commit 0fe5164cbaa1d65dda341075710be71bf1f32d10
Author: Patrick McHardy <kaber@trash.net>
Date: Fri Dec 4 07:06:18 2009 +0100
iprule: add oif classification support
Signed-off-by: Patrick McHardy <kaber@trash.net>
This patch adds support for the VLAN loose binding flag that is
supported in net-next to iplink_vlan.
commit 870970deb6cbea7a5d4881bdd717304d5284d315
Author: Patrick McHardy <kaber@trash.net>
Date: Tue Dec 1 12:21:15 2009 +0100
iplink_vlan: add support for VLAN loose binding flag
Signed-off-by: Patrick McHardy <kaber@trash.net>
Unless promote_secondaries has been active deleting the primary address of
an interface will automatically delete all the secondary addresses.
In the case where ip flush requests the primary then secondary addresses to
be removed - which is the order the addresses are returned by the kernel -
this will cause an error as by the time the request to remove a secondary
address is made it will be missing as it will have been deleted in the
course of deleting the primary address.
This approach to solving this problem orders requests for the
deletion of secondary addresses before primary ones providing
rtnl_dump_filter_l(), a version of rtnl_dump_filter() that
iterates over a list of filters. And by providing two specialised
filters print_addrinfo_secondary() and print_addrinfo_primary().
rtnl_dump_filter_l() first iterates over all addresses using
print_addrinfo_secondary(), which appends secondary addresses to the
request buffer. Then again using print_addrinfo_primary() which appends
primary addresses.
This approach should work regardless of it promote_secondaries is
active or not. And regardless of if any primary of secondary addresses
are present or not.
Signed-off-by: Simon Horman <horms@verge.net.au>
The command "ip mroute show" will only show the first Oif.
mark@flappie:~$ ip mroute show
(192.168.1.1, 224.0.0.123) Iif: _rename Oifs: eth1
mark@flappie:~$ cat /proc/net/ip_mr_cache
Group Origin Iif Pkts Bytes Wrong Oifs
7B0000E0 0101A8C0 2 0 0 0 0:1 1:1
This shows 2 Oifs here. However, ipmroute.c, function read_mroute_list(), uses sscanf() with a %s mask for oiflist, which stops after the first whitespace (i.e. after Oif 0:1). The patch below fixes this to read until the newline (though I'm not sure whether this is the proper way to fix it).
After this patch:
mark@flappie:~/iproute-20090324/ip$ ./ip mroute show
(192.168.1.1, 224.0.0.123) Iif: _rename Oifs: eth1 eth0
This patch originally submitted as http://bugs.debian.org/550097
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Add IFA_F_DADFAILED flag to denote an IPv6 address that has
failed Duplicate Address Detection, that way tools like
/sbin/ip can be more informative.
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
inet6 2001:db8::1/64 scope global tentative dadfailed
valid_lft forever preferred_lft forever
Signed-off-by: Brian Haley <brian.haley@hp.com>
- Parse and handle the hoplimit ip route option and add it to the usage
line and documentation.
- Add the missing reordering ip route option to the usage line.
- Add documentation for initcwnd ip route option.
Tested by setting hoplimit and retreiving it via "show".
Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com>
[ported to HEAD, fixed a bug with hoplimit lock handling, added documentation]
Signed-off-by: Ori Finkelman <ori@comsleep.com>
Signed-off-by: Yony Amit <yony@comsleep.com>
The iptables code supports a "no shared libs" mode where it can be used
without requiring dlfcn related functionality. This adds similar support
to iproute2 so that it can easily be used on systems like nommu Linux (but
obviously with a few limitations -- no dynamic plugins).
Rather than modify every location that uses dlfcn.h, I hooked the dlfcn.h
header with stub functions when shared library support is disabled. Then
symbol lookup is done via a local static lookup table (which is generated
automatically at build time) so that internal symbols can be found.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
It uses 1MB as receive buf limit by default (without
increasing /proc/sys/net/core/rmem_max it will be limited by less
however) and allows to specify the size manually using "-rcvbuf X"
(-r is already used, so you need to specify at least -rc).
Additionally rtnl_listen() continues on ENOBUFS after printing the
error message.
--Boundary-01=_wxi/JRaNdLkbr7g
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Hi Stephen,
please review attached patch to add support for in-kernel potential router=
=20
lists for ISATAP tunnels.
Usage:
ip tunnel add name isatap0 mode isatap local 192.168.1.100
ip tunnel prl dev isatap0 prl-default 192.168.1.1
ip tunnel prl dev isatap0 prl-nodefault 192.168.1.2
ip tunnel prl dev isatap0 prl-delete 192.168.1.1
ip tunnel show # pr and pdr will be listed as well
Patch based on http://osprey67.com/seal/iproute2_diff.v0_3.txt by Fred L.=20
Templin.
Thanks,
Sascha
On tor, 2009-04-30 at 14:32 +0100, Timothy Baldwin wrote:
> Package: iproute
> Version: 20090324-1
> Severity: minor
>
>
> $ ip link set eth0 address help
> "help" is invalid lladdr.
> Segmentation fault
>
> Desipte the invalid command line arguments it shouldn't crash.
>
Callers need to check return value from ll_addr_a2n(). Patch below.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
When using iproute2 to display information on policies installed in kernel
(ip x p s) output is incorrect: IPv6 addresses printed as IPv4 addresses.
In case I am dealing with inter protocol policies where the template's address
family differs from those of the policy itself.
The patch attached solves this problem.
Hello Stephen,
thanks für the commit of my last CAN patch.
Today i got a hint, that the help text of 'ip link' can be improved also.
Many thanks!
Oliver
Signed-Off-By: Oliver Hartkopp <oliver@hartkopp.net>
t's not a big problem, but it makes a better show in 'ip link show' on
CAN interfaces :-)
I also moved __PF(CAN,can) in ll_proto.c to the same position where it
can be found in if_ether.h .
The only thing i did not know if the __PF(CAN,can) in ll_types.c needs
to be put in #ifdef ARPHDR_CAN like __PF(HWX25,hwx25) is or not. You
definitely know that better than me.
"ip -6 tunnel show" displays only ip6ip6 tunnels not ip4ip6 tunnels
- it should display all irrespective of proto.
This is because the default tunnel proto is initialized to IPPROTO_IPV6 in ip6_tnl_parm_init() which is fine for a 'add' command but not for 'show'. This patch overrides proto with 0 signifying 'mode any' as the default in case of a 'show'.
please commit my patch below to the iproutes package. It just an incorrect
check so that adding an isatap tunnel with remote works, since it's needed if
one wants to use stateless autoconf. The current check makes tunnel mode
isatap unusable for all client users.
Hello Stephen and netdev people!
Currently you can configure "equalize" and it looks all fine and dandy.
The kernel has the interface defined, but apparently there's never actually
been any implementation for it (only a never merged patch in the 2.4 era).
I'm suggesting to drop the code to give any potential users of this feature
the benefit of receiving a proper error message. I see it unlikely that
this will be implemented in the near future, but if it ever happens
reviving the iproute2 side should be as easy as git revert this patch.
For more details see http://bugs.debian.org/149897
Regards,
Andreas Henriksson
This patch adds prefix lables for "ip monitor all" command to simplfy
understanding of the output.
Signed-off-by: Varun Chandramohan <varunc@linux.vnet.ibm.com>
This patch adds exclusive support to enable monitoring
neighbour table entries in ip command.
Signed-off-by: Varun Chandramohan <varunc@linux.vnet.ibm.com>
patch attached this time..
On Fri, 2008-08-08 at 10:01 -0400, jamal wrote:
> wireless drivers using wext is a prime example if you need a test case.
>
> cheers,
> jamal
ip: Allow for easier debug of buggy devices that dont send their names
With the old message couldnt tell which device had the bug.
This patch provides at least an ifindex to narrow it down.
Theres also no point in bailing out because of one bug; we
allow it to go on so we could dump as much info as we can
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
(router solicitation) becomes negative
How reproducible:
Always.
Steps to Reproduce:
1. Configure an IPv6 router to advertise a prefix with a short preferred
lifetime, e.g. 0.
2. Wait for the IPv6 autoconfiguration process to complete for an interface
<if> connected to a link where that router advertises.
3. Run ip -6 show dev <if>.
Actual results:
The preferred lifetime will have become negative, but it is printed as an
unsigned integer. The preferred lifetime to be displayed will therefore be
close to UINT_MAX.
“ip maddr show” on an infiniband address causes a stack corruption
because the length of the address for Infiniband (20 bytes, as
described in kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4
__u32 to 8 and also adds a check to avoid overriding the available
size while parsing the hardware address.
This bug affects current upstream code AFAICT.
Hope this helps,
Cheers,
Olivier.
“ip maddr show ib0” causes a stack corruption because the length of the address
for Infiniband (20 see kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4 u32 to 8
and adds a check to avoid overriding the available size while parsing the
hardware address.
This patch adds support for configuring GRE tunnels using the
new rtnl_link interface. This only works on kernels that have
the new GRE configuration interface.
This is accessed through the "ip link" command. The previous
tunnel configuration interface "ip tunnel" remains as it is
and should be retained for compatibility with old kernels.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for configuring GRE tunnels using the
new rtnl_link interface. This only works on kernels that have
the new GRE configuration interface.
This is accessed through the "ip link" command. The previous
tunnel configuration interface "ip tunnel" remains as it is
and should be retained for compatibility with old kernels.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is a variant of Patrick McHardy patch for help text.
Add help for ip link add and ip link delete.
The help conditional on what the kernel supports.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Fix confusing error message noticed by Martin Josefsson:
Fix typo noticed by Phil Oester: information vs. informatin
# ip link add
RTNETLINK answers: Operation not supported
The reason is missing device type information, refuse this and print a message.
Signed-off-by: Patrick McHardy <kaber@trash.net>
For some reason "ip link add help" is currently not supported when using
the new rtnl_link API. Fix that.
Signed-off-by: Patrick McHardy <kaber@trash.net>
This patch allows the user to create/manage AEAD algorithms with
the ip xfrm command. AEAD algorithms are also known as combined-
mode algorithms. They provide the functionality of encryption
algorithms as well as authentication algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Saurabh Mohan
Stephen Hemminger
Eric Dumazet
Chris Elston
Andreas Henriksson
Christoph J. Thompson
Jorge Boncompte [DTI2]
Stephen Hemminger
João Valverde
Florian Westphal
Yegor Yefremov
Tony Zelenoff
Greg Rose
Thomas Jarosch
Jiri Benc
Sridhar Samudrala
Dan McGee
Eric W. Biederman
Christoph Biedl
David Ward
Eric Dumazet
Ulrich Weber
Brandon Philips
Vlad Dogaru
Nicolas Dichtel
Gerrit Renker
Joy Latten
Jiri Pirko
Roopa Prabhu
Dan Smith
Ben Greear
Andreas Schwab
Timo Teräs
Arnd Hannemann
Patrick McHardy
Jan Engelhardt
Chris Wright
Alexandre Cassen
Michele Petrazzo - Unipex
Wolfgang Grandegger
Jamal Hadi Salim
Williams, Mitch A
laurent chavey
Brian Haley
Alex Badea
Arnd Bergmann
Simon Horman
Mark Borst
Gilad Ben-Yossef
Mike Frysinger
David Woodhouse
Sascha Hlusiak
Thomas Egerer
Oliver Hartkopp
Srivats P
Sascha Hlusiak
Varun Chandramohan
Petr Jediný
Benedikt Gollatz
Olivier Fourdan
Herbert Xu