Implement support for action terse dump using new TCA_ACT_FLAG_TERSE_DUMP
value of TCA_ROOT_FLAGS tlv. Set the flag when user requested it with
following example CLI (-br for 'brief'):
$ tc -s -br actions ls action tunnel_key
total acts 2
action order 0: tunnel_key index 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
action order 1: tunnel_key index 2
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
In terse mode dump only outputs essential data needed to identify the
action (kind, index) and stats, if requested by the user.
Signed-off-by: Vlad Buslov <vlad@buslov.dev>
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Use TCA_ACT_FLAG_LARGE_DUMP_ON alias according to new preferred naming for
action flags.
Signed-off-by: Vlad Buslov <vlad@buslov.dev>
Signed-off-by: David Ahern <dsahern@gmail.com>
With gcc-10 it complains about array subscript error.
f_u32.c: In function ‘u32_parse_opt’:
f_u32.c:1113:24: warning: array subscript 0 is outside the bounds of an interior zero-length array ‘struct tc_u32_key[0]’ [-Wzero-length-bounds]
1113 | hash = sel2.sel.keys[0].val & sel2.sel.keys[0].mask;
| ~~~~~~~~~~~~~^~~
In file included from tc_util.h:11,
from f_u32.c:26:
../include/uapi/linux/pkt_cls.h:253:20: note: while referencing ‘keys’
253 | struct tc_u32_key keys[0];
|
This is because the keys are actually allocated in the second element
of the parent structure.
Simplest way to address the warning is to assign directly to the keys
in the containing structure.
This has always been in iproute2 (pre-git) so no Fixes.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Gcc-10 complains about referencing a zero size array.
This occurs because the array of keys is actually in the following
structure which is part of the overall selector.
The original code was safe, but better to just use the key
array directly.
Fixes: 2d9a8dc439 ("tc: p_ip6: Support pedit of IPv6 dsfield")
Cc: petrm@mellanox.com
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch aim to add basic checking functions for later iproute2
libbpf support.
First we add check_libbpf() in configure to see if we have bpf library
support. By default the system libbpf will be used, but static linking
against a custom libbpf version can be achieved by passing libbpf DESTDIR
to variable LIBBPF_DIR for configure.
Another variable LIBBPF_FORCE is used to control whether to build iproute2
with libbpf. If set to on, then force to build with libbpf and exit if
not available. If set to off, then force to not build with libbpf.
When dynamically linking against libbpf, we can't be sure that the
version we discovered at compile time is actually the one we are
using at runtime. This can lead to hard-to-debug errors. So we add
a new file lib/bpf_glue.c and a helper function get_libbpf_version()
to get correct libbpf version at runtime.
Signed-off-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
When protocol is vlan then eth_type is set to the vlan eth type.
So when parsing vlan_id and vlan_prio need to check tc_proto
is vlan and not eth_type.
Fixes: 4c551369e0 ("tc flower: use right ethertype in icmp/arp parsing")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently the icmp and arp parsing functions are called with incorrect
ethtype in case of vlan or cvlan filter options. In this case either
cvlan_ethtype or vlan_ethtype has to be used. The ethtype is now updated
each time a vlan ethtype is matched during parsing.
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The code for handling batches is largely the same across iproute2 tools.
Extract a helper to handle the batch, and adjust the tools to dispatch to
this helper. Sandwitch the invocation between prologue / epilogue code
specific for each tool.
Signed-off-by: Petr Machata <me@pmachata.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Manpage:
* Remove the extra "and to ip packets" part from command description
to make it more understandable.
* Redirect packets to eth1, instead of eth0, as told in the
description.
Help string:
* "mpls pop" can be followed by a CONTROL keyword.
* "mpls modify" can also set the MPLS_BOS field.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
* "vlan pop" can be followed by a CONTROL keyword.
* Add missing space in error message.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Implement support for classifier/action terse dump using new TCA_DUMP_FLAGS
tlv with only available flag value TCA_DUMP_FLAGS_TERSE. Set the flag when
user requested it with following example CLI (-br for 'brief'):
$ tc -s -br filter show dev ens1f0 ingress
filter protocol ip pref 49151 flower chain 0
filter protocol ip pref 49151 flower chain 0 handle 0x1
not_in_hw
action order 1: gact Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
filter protocol ip pref 49152 flower chain 0
filter protocol ip pref 49152 flower chain 0 handle 0x1
not_in_hw
action order 1: gact Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
In terse mode dump only outputs essential data needed to identify the
filter and action (handle, cookie, etc.) and stats, if requested by the
user. The intention is to significantly improve rule dump rate by omitting
all static data that do not change after rule is created.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Modify implementations that return error from action_until->print_aopt()
callback to silently skip actions that don't have their corresponding
TCA_ACT_OPTIONS attribute set (some actions already behave like this).
Print action kind before returning from action_until->print_aopt()
callbacks. This is necessary to support terse dump mode in following patch
in the series.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Commit 02a261b5ba ("m_mpls: add mac_push action") added a matches()
test for the "mac_push" string before the test for "modify".
This changes the previous behaviour as 'action m' used to match
"modify" while it now matches "mac_push".
Revert to the original behaviour by moving the "mac_push" test after
"modify".
Fixes: 02a261b5ba ("m_mpls: add mac_push action")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new TCA_MPLS_ACT_MAC_PUSH action (kernel commit
a45294af9e96 ("net/sched: act_mpls: Add action to push MPLS LSE before
Ethernet header")). This action let TC push an MPLS header before the
MAC header of a frame.
Example (encapsulate all outgoing frames with label 20, then add an
outer Ethernet header):
# tc filter add dev ethX matchall \
action mpls mac_push label 20 ttl 64 \
action vlan push_eth dst_mac 0a:00:00:00:00:02 \
src_mac 0a:00:00:00:00:01
This patch also adds an alias for ETH_P_TEB, since it is useful when
decapsulating MPLS packets that contain an Ethernet frame.
With MAC_PUSH, there's no previous Ethertype to modify. However, the
"protocol" option is still needed, because the kernel uses it to set
skb->protocol. So rename can_modify_ethtype() to can_set_ethtype().
Also add a test suite for m_mpls, which covers the new action and the
pre-existing ones.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add support for the new TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH
actions (kernel commit 19fbcb36a39e ("net/sched: act_vlan:
Add {POP,PUSH}_ETH actions"). These action let TC remove or add the
Ethernet at the head of a frame.
Drop an Ethernet header:
# tc filter add dev ethX matchall action vlan pop_eth
Push an Ethernet header (the original frame must have no MAC header):
# tc filter add dev ethX matchall action vlan \
push_eth dst_mac 0a:00:00:00:00:02 src_mac 0a:00:00:00:00:01
Also add a test suite for m_vlan, which covers these new actions and
the pre-existing ones.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Replace the iproute2 snapshot with a version string which is
autogenerated as part of the build process using git describe.
This will also allow seeing if the version of the command
is built from the same sources is as upstream.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add space after format specifier in print_string call. Fixes broken
qdisc tests within tdc testing suite. Per suggestion from Petr Machata,
remove a space and change spacing in tc/q_event.c to complete the fix.
Tested fix in tdc using:
./tdc.py -c qdisc
All qdisc RED tests return ok.
Fixes: d0e450438571("tc: q_red: Add support for qevents "mark" and "early_drop")
Signed-off-by: Briana Oursler <briana.oursler@gmail.com>
Tested-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
While looking at the estimator code, I noticed an incorrect interval
number printed in raw for the handles. This patch fixes the formatting.
Before patch:
root@bytecenter.fr:~# tc -r filter add dev eth0 ingress estimator
250ms 999ms matchall action police avrate 12mbit conform-exceed drop
[estimator i=4294967294 e=2]
After patch:
root@bytecenter.fr:~# tc -r filter add dev eth0 ingress estimator
250ms 999ms matchall action police avrate 12mbit conform-exceed drop
[estimator i=-2 e=2]
Signed-off-by: Jamie Gloudon <jamie.gloudon@gmx.fr>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In order for "tc filter show block X" to find a given block, implement the
has_block callback.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
When a list of filters at a given block is requested, tc first validates
that the block exists before doing the filter query. Currently the
validation routine checks ingress and egress blocks. But now that blocks
can be bound to qevents as well, qevent blocks should be looked for as
well.
In order to support that, extend struct qdisc_util with a new callback,
has_block. That should report whether, give the attributes in TCA_OPTIONS,
a blocks with a given number is bound to a qevent. In
tc_qdisc_block_exists_cb(), invoke that callback when set.
Add a helper to the tc_qevent module that walks the list of qevents and
looks for a given block. This is meant to be used by the individual qdiscs.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add the new "mpls" keyword that can be used to match MPLS fields in
arbitrary Label Stack Entries.
LSEs are introduced by the "lse" keyword and followed by LSE options:
"depth", "label", "tc", "bos" and "ttl". The depth is manadtory, the
other options are optionals.
For example, the following filter drops MPLS packets having two labels,
where the first label is 21 and has TTL 64 and the second label is 22:
$ tc filter add dev ethX ingress proto mpls_uc flower mpls \
lse depth 1 label 21 ttl 64 \
lse depth 2 label 22 bos 1 \
action drop
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Before can be possible show only all qeueue disciplines on an interface.
There wasn't a way to get the qdisc info by handle or parent, only full
dump of the disciplines with a following grep/sed usage.
Now new and old options work as expected to filter a qdisc by handle or
parent.
Full syntax of the qdisc show command:
tc qdisc { show | list } [ dev STRING ] [ QDISC_ID ] [ invisible ]
QDISC_ID := { root | ingress | handle QHANDLE | parent CLASSID }
This change doesn't require any changes in the kernel.
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The "early_drop" qevent matches packets that have been early-dropped. The
"mark" qevent matches packets that have been ECN-marked.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Introduce a set of helpers to make it easy to add support for qevents into
qdisc.
The idea behind this is that qevent types will be generally reused between
qdiscs, rather than each having a completely idiosyncratic set of qevents.
The qevent module holds functions for parsing, dumping and formatting of
these common qevent types, and for dispatch to the appropriate set of
handlers based on the qevent name.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Current police action must set 'rate' and 'burst'. 'mtu' parameter
set the max frame size and could be set alone without 'rate' and 'burst'
in some situation. Offloading to hardware for example, 'mtu' could limit
the flow max frame size.
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Change the double quotes to single quotes in fprintf message to make it
more readable.
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Have print_tm() dump firstuse value along with install, lastuse
and expires.
v2: Resubmit after 'master' merged into next
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Report tcf_t values in seconds, not jiffies, in JSON format as it is now
for stdout.
v2: use PRINT_ANY, drop the useless casts and fix the style (Stephen Hemminger)
Fixes: 2704bd6255 ("tc: jsonify actions core")
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Provide a sanity check that will make sure whether queues count/offset
pair count will not exceed the actual number of TCs being created.
Example command that is invalid because there are 4 count/offset pairs
whereas num_tc is only 2.
# tc qdisc add dev enp96s0f0 root mqprio num_tc 2 map 0 0 0 0 1 1 1 1
queues 4@0 4@4 4@8 4@12 hw 1 mode channel
Store the parsed count/offset pair count onto a dedicated variable that
will be compared against opt.num_tc after all of the command line
arguments were parsed. Bail out if this count is higher than opt.num_tc
and let user know about it.
Drivers were swallowing such commands as they were iterating over
count/offset pairs where num_tc was used as a delimiter, so this is not
a big deal, but better catch such misconfiguration at the command line
argument parsing level.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Introduce a ingress frame gate control flow action.
Tc gate action does the work like this:
Assume there is a gate allow specified ingress frames can pass at
specific time slot, and also drop at specific time slot. Tc filter
chooses the ingress frames, and tc gate action would specify what slot
does these frames can be passed to device and what time slot would be
dropped.
Tc gate action would provide an entry list to tell how much time gate
keep open and how much time gate keep state close. Gate action also
assign a start time to tell when the entry list start. Then driver would
repeat the gate entry list cyclically.
For the software simulation, gate action require the user assign a time
clock type.
Below is the setting example in user space. Tc filter a stream source ip
address is 192.168.0.20 and gate action own two time slots. One is last
200ms gate open let frame pass another is last 100ms gate close let
frames dropped.
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 parent ffff: protocol ip \
flower src_ip 192.168.0.20 \
action gate index 2 clockid CLOCK_TAI \
sched-entry open 200000000ns -1 8000000b \
sched-entry close 100000000ns
# tc chain del dev eth0 ingress chain 0
"sched-entry" follow the name taprio style. Gate state is
"open"/"close". Follow the period nanosecond. Then next -1 is internal
priority value means which ingress queue should put to. "-1" means
wildcard. The last value optional specifies the maximum number of
MSDU octets that are permitted to pass the gate during the specified
time interval, the overlimit frames would be dropped.
Below example shows filtering a stream with destination mac address is
10:00:80:00:00:00 and ip type is ICMP, follow the action gate. The gate
action would run with one close time slot which means always keep close.
The time cycle is total 200000000ns. The base-time would calculate by:
1357000000000 + (N + 1) * cycletime
When the total value is the future time, it will be the start time.
The cycletime here would be 200000000ns for this case.
#tc filter add dev eth0 parent ffff: protocol ip \
flower skip_hw ip_proto icmp dst_mac 10:00:80:00:00:00 \
action gate index 12 base-time 1357000000000ns \
sched-entry CLOSE 200000000ns \
clockid CLOCK_TAI
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
My latest patch missed the fact that this file got JSON support.
Also fixes a spelling error added during JSON change.
Fixes: be9ca9d541 ("tc: fq: add timer_slack parameter")
Fixes: d15e2bfc04 ("tc: fq: add support for JSON output")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch is to add TCA_FLOWER_KEY_ENC_OPTS_ERSPAN's parse and
print to implement erspan options support in m_tunnel_key, like
Commit 56155d4df8 ("tc: f_flower: add geneve option match
support to flower") for geneve options support.
Option is expressed as version:index:dir:hwid, dir and hwid will
be parsed when version is 2, while index will be parsed when
version is 1. erspan doesn't support multiple options.
With this patch, users can add and dump erspan options like:
# ip link add name erspan1 type erspan external
# tc qdisc add dev erspan1 ingress
# tc filter add dev erspan1 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
erspan_opts 1:2:0:0/1:255:0:0 \
ip_proto udp \
action mirred egress redirect dev eth1
# tc -s filter show dev erspan1 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
enc_dst_ip 10.0.99.193
enc_src_ip 10.0.99.192
enc_key_id 11
erspan_opts 1:2:0:0/1:255:0:0
not_in_hw
action order 1: mirred (Egress Redirect to device eth1) stolen
index 1 ref 1 bind 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
v1->v2:
- no change.
v2->v3:
- no change.
v3->v4:
- keep the same format between input and output, json and non json.
- print version, index, dir and hwid as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_FLOWER_KEY_ENC_OPTS_VXLAN's parse and
print to implement vxlan options support in m_tunnel_key, like
Commit 56155d4df8 ("tc: f_flower: add geneve option match
support to flower") for geneve options support.
Option is expressed a 32bit number for gbp only, and vxlan
doesn't support multiple options.
With this patch, users can add and dump vxlan options like:
# ip link add name vxlan1 type vxlan dstport 0 external
# tc qdisc add dev vxlan1 ingress
# tc filter add dev vxlan1 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
vxlan_opts 65793/4008635966 \
ip_proto udp \
action mirred egress redirect dev eth1
# tc -s filter show dev vxlan1 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
enc_dst_ip 10.0.99.193
enc_src_ip 10.0.99.192
enc_key_id 11
vxlan_opts 65793/4008635966
not_in_hw
action order 1: mirred (Egress Redirect to device eth1) stolen
index 3 ref 1 bind 1
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
v1->v2:
- get_u32 with base = 0 for gbp.
v2->v3:
- implement proper JSON array for opts.
v3->v4:
- keep the same format between input and output, json and non json.
- print gbp as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_TUNNEL_KEY_ENC_OPTS_ERSPAN's parse and
print to implement erspan options support in m_tunnel_key, like
Commit 6217917a38 ("tc: m_tunnel_key: Add tunnel option support
to act_tunnel_key") for geneve options support.
Option is expressed as version:index:dir:hwid, dir and hwid will
be parsed when version is 2, while index will be parsed when
version is 1. erspan doesn't support multiple options.
With this patch, users can add and dump erspan options like:
# ip link add name erspan1 type erspan external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
erspan_opts 1:2:0:0 \
action mirred egress redirect dev erspan1
# tc -s filter show dev eth0 parent ffff:
filter protocol ip pref 49151 flower chain 0 handle 0x1
indev eth0
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: tunnel_key set
src_ip 10.0.99.192
dst_ip 10.0.99.193
key_id 11
dst_port 6081
erspan_opts 1:2:0:0
csum pipe
index 2 ref 1 bind 1
...
v1->v2:
- no change.
v2->v3:
- no change.
v3->v4:
- keep the same format between input and output, json and non json.
- print version, index, dir and hwid as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add TCA_TUNNEL_KEY_ENC_OPTS_VXLAN's parse and
print to implement vxlan options support in m_tunnel_key, like
Commit 6217917a38 ("tc: m_tunnel_key: Add tunnel option support
to act_tunnel_key") for geneve options support.
Option is expressed a 32bit number for gbp only, and vxlan
doesn't support multiple options.
With this patch, users can add and dump vxlan options like:
# ip link add name vxlan1 type vxlan dstport 0 external
# tc qdisc add dev eth0 ingress
# tc filter add dev eth0 protocol ip parent ffff: \
flower indev eth0 \
ip_proto udp \
action tunnel_key \
set src_ip 10.0.99.192 \
dst_ip 10.0.99.193 \
dst_port 6081 \
id 11 \
vxlan_opts 65793 \
action mirred egress redirect dev vxlan1
# tc -s filter show dev eth0 parent ffff:
filter protocol ip pref 49152 flower chain 0 handle 0x1
indev eth0
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: tunnel_key set
src_ip 10.0.99.192
dst_ip 10.0.99.193
key_id 11
dst_port 6081
vxlan_opts 65793
...
v1->v2:
- get_u32 with base = 0 for gbp.
- use to print_unint("0x%x") to print gbp.
v2->v3:
- implement proper JSON array for opts.
v3->v4:
- keep the same format between input and output, json and non json.
- print gbp as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The action pedit does not currently support dumping to JSON. Convert
print_pedit() to the print_* family of functions so that dumping is correct
both in plain and JSON mode. In plain mode, the output is character for
character the same as it was before. In JSON mode, this is an example dump:
$ tc filter add dev dummy0 ingress prio 125 flower \
action pedit ex munge udp dport set 12345 \
munge ip ttl add 1 \
munge offset 10 u8 clear
$ tc -j filter show dev dummy0 ingress | jq
[
{
"protocol": "all",
"pref": 125,
"kind": "flower",
"chain": 0
},
{
"protocol": "all",
"pref": 125,
"kind": "flower",
"chain": 0,
"options": {
"handle": 1,
"keys": {},
"not_in_hw": true,
"actions": [
{
"order": 1,
"kind": "pedit",
"control_action": {
"type": "pass"
},
"nkeys": 3,
"index": 1,
"ref": 1,
"bind": 1,
"keys": [
{
"htype": "udp",
"offset": 0,
"cmd": "set",
"val": "3039",
"mask": "ffff0000"
},
{
"htype": "ipv4",
"offset": 8,
"cmd": "add",
"val": "1000000",
"mask": "ffffff"
},
{
"htype": "network",
"offset": 8,
"cmd": "set",
"val": "0",
"mask": "ffff00ff"
}
]
}
]
}
}
]
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Commit 583396f4ca4d ("net_sched: sch_fq: enable use of hrtimer slack")
added TCA_FQ_TIMER_SLACK parameter, with a default value of 10 usec.
Add the corresponding tc support to get/set this tunable.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
David Ahern
Stephen Hemminger
Luca Boccassi
Vlad Buslov
Hangbin Liu
Roi Dayan
Zahari Doychev
Petr Machata
Guillaume Nault
Vlad Buslov
zhangkaiheb@126.com
David Ahern
Briana Oursler
Jamie Gloudon
Petr Machata
Anton Danilov
Po Liu
Roman Mashak
Maciej Fijalkowski
Eric Dumazet
Davide Caratti
Benjamin Poirier
Xin Long