This action could be used before redirecting packets to a shared tunnel
device, or when redirecting packets arriving from a such a device.
The 'unset' action is optional. It is used to explicitly unset the
metadata created by the tunnel device during decap. If not used, the
metadata will be released automatically by the kernel.
The 'set' operation, will set the metadata with the specified values for
the encap.
For example, the following flower filter will forward all ICMP packets
destined to 11.11.11.2 through the shared vxlan device 'vxlan0'. Before
redirecting, a metadata for the vxlan tunnel is created using the
tunnel_key action and it's arguments:
$ tc filter add dev net0 protocol ip parent ffff: \
flower \
ip_proto 1 \
dst_ip 11.11.11.2 \
action tunnel_key set \
src_ip 11.11.0.1 \
dst_ip 11.11.0.2 \
id 11 \
action mirred egress redirect dev vxlan0
Signed-off-by: Amir Vadai <amir@vadai.me>
This is needed for some HWs to do proper macthing and steering.
Possible values are none, link, network, transport.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
This work moves the bpf loader into the iproute2 library and reworks
the tc specific parts into generic code. It's useful as we can then
more easily support new program types by just having the same ELF
loader backend. Joint work with Thomas Graf. I hacked a rough start
of a test suite to make sure nothing breaks [1] and looks all good.
[1] https://github.com/borkmann/clsact/blob/master/test_bpf.sh
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
If we have multicast routes and do ip route show table all we'll get the
following output:
...
multicast ???/32 from ???/32 table default proto static iif eth0
The "???" are because the rtm_family is set to RTNL_FAMILY_IPMR instead
(or RTNL_FAMILY_IP6MR for ipv6). Add a simple workaround that returns the
real family based on the rtm_type (always RTN_MULTICAST for ipmr routes)
and the rtm_family. Similar workaround is already used in ipmroute, and
we can use this helper there as well.
After the patch the output is:
multicast 239.10.10.10/32 from 0.0.0.0/32 table default proto static iif eth0
Also fix a minor whitespace error and switch to tabs.
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch adds support for the stats argument to the bridge
vlan command which will display the per-vlan statistics and the device
each vlan belongs to with its flags. The supported command filtering
options are dev and vid. Also the man page is updated to explain the new
option.
The patch uses the new RTM_GETSTATS interface with a filter_mask to dump
all bridges and ports vlans. Later we can add support for using the
per-device dump and filter it in the kernel instead.
Example:
$ bridge -s vlan show
port vlan id
br0 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
eth1 1 Egress Untagged
RX: 2536 bytes 20 packets
TX: 2536 bytes 20 packets
100
RX: 0 bytes 0 packets
TX: 0 bytes 0 packets
101
RX: 43158 bytes 50 packets
TX: 43158 bytes 50 packets
102
RX: 16897 bytes 93 packets
TX: 0 bytes 0 packets
The format is the same as bridge vlan show but with stats, even though
under the hood the calls done to the kernel are different.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
All users of genl have the same code to open a genl socket and resolve
the family for their specific protocol. Introduce a helper to initialize
the handle, and use it in all the genl code.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Add two NLA's that allow configuration of Infiniband node or port GUIDs
by referencing the IPoIB net device set over the physical function. The
format to be used is as follows:
ip link set dev ib0 vf 0 node_guid 00:02:c9:03:00:21:6e:70
ip link set dev ib0 vf 0 port_guid 00:02:c9:03:00:21:6e:78
Signed-off-by: Eli Cohen <eli@mellanox.com>
Kernel gained support for filtering link dumps with commit dc599f76c22b
("net: Add support for filtering link dump by master device and kind").
Add support to ip link command. If a user passes master device or
kind to ip link command they are added to the link dump request message.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Stephen Hemminger
Amir Vadai
Roi Dayan
Daniel Borkmann
Stephen Hemminger
Phil Sutter
michael-dev@fami-braun.de
Nikolay Aleksandrov
Sabrina Dubroca
Stephen Hemminger
Eli Cohen
David Ahern