In case of an older kernel that doesn't set L2TP_ATTR_UDP_ZERO_CSUM6_{RX,TX}
the old hard-coded value is being preserved, since the attribute flag will be
missing.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
L2TP_ATTR_UDP_CSUM is read by the kernel as a NLA_FLAG value,
but is validated as a NLA_U8, so we will write it as an u8,
but the value isn't actually being read by the kernel.
It is written by the kernel as a NLA_U8, so we will read as
such.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
L2TP_ATTR_RECV_SEQ and L2TP_ATTR_SEND_SEQ are declared as NLA_U8
attributes in the kernel, so let's threat them accordingly.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
udp6_csum_{tx,rx}, tunnel and session are the only ones
currently used.
recv_seq, send_seq, lns_mode and data_seq are partially
implemented in a useless way.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
v5:
- rebase and fix checkpatch
v4:
- add MACADDR_SET support
- skip FLAG_UNICAST / FLAG_UNICAST_ALL as this is not upstream
- fix man page
- Support adding, deleting and showing IP rules with UID ranges.
- Support querying per-UID routes via "ip route get uid <UID>".
UID range routing was added to net-next in 4fb7450683 ("Merge
branch 'uid-routing'")
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Commit 7b8179c780 ("iproute2: Add new command to ip link to
enable/disable VF spoof check") tried to add support for
IFLA_VF_SPOOFCHK in a backwards-compatible manner, but aparently overdid
it: parse_rtattr_nested() handles missing attributes perfectly fine in
that it will leave the relevant field unassigned so calling code can
just compare against NULL. There is no need to layback from the previous
(IFLA_VF_TX_RATE) attribute to the next to check if IFLA_VF_SPOOFCHK is
present or not. To the contrary, it establishes a potentially incorrect
assumption of these two attributes directly following each other which
may not be the case (although up to now, kernel aligns them this way).
This patch cleans up the code to adhere to the common way of checking
for attribute existence. It has been tested to return correct results
regardless of whether the kernel exports IFLA_VF_SPOOFCHK or not.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Greg Rose <grose@lightfleet.com>
Recently a new per-port flag was added which controls the flooding of
unknown multicast, this patch adds support for controlling it via iproute2.
It also updates the man pages with information about the new flag.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
iprule_flush() and iprule_list_or_save() both call function
rtnl_wilddump_request() and rtnl_dump_filter(). So merge them
together just like other files do.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Introduce a new API that exposes a list of vlans per VF (IFLA_VF_VLAN_LIST),
giving the ability for user-space application to specify it for the VF as
an option to support 802.1ad (VST QinQ).
We introduce struct vf_vlan_info, which extends struct vf_vlan and adds
an optional VF VLAN proto parameter.
Default VLAN-protocol is 802.1Q.
Add IFLA_VF_VLAN_LIST in addition to IFLA_VF_VLAN to keep backward
compatibility with older kernel versions.
Suitable ip link tool command examples:
- Set vf vlan protocol 802.1ad (S-TAG)
ip link set eth0 vf 1 vlan 100 proto 802.1ad
- Set vf vlan S-TAG and vlan C-TAG (VST QinQ)
ip link set eth0 vf 1 vlan 100 proto 802.1ad vlan 30 proto 802.1Q
- Set vf to VST (802.1Q) mode
ip link set eth0 vf 1 vlan 100 proto 802.1Q
- Or by omitting the new parameter (backward compatible)
ip link set eth0 vf 1 vlan 100
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Add support to dump the mroute cache entry age if the show_stats (-s)
switch is provided.
Example:
$ ip -s mroute
(0.0.0.0, 239.10.10.10) Iif: eth0 Oifs: eth0
0 packets, 0 bytes, Age 245.44
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
The calling of netns_map_init() before command parsing introduced
a performance issue with large number of namespaces.
As commands such as add, del and exec do not need to iterate through
/var/run/netns it would be good not no build the cache before executing
these commands.
Example:
unpatched:
time seq 1 1000 | xargs -n 1 ip netns add
real 0m16.832s
user 0m1.350s
sys 0m15.029s
patched:
time seq 1 1000 | xargs -n 1 ip netns add
real 0m3.859s
user 0m0.132s
sys 0m3.205s
Signed-off-by: Anton Aksola <aakso@iki.fi>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The original bond/bridge/vrf and slaves use same id, which make people
confused. Use bond/bridge/vrf_slave as id name will make code more clear.
Acked-by: Phil Sutter <psutter@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
In ip monitor, netns_map_init will check getnsid is supported or not.
But when /proc/self/ns/net does not exist, we just print out error
messages and exit. So user cannot use ip monitor anymore when
CONFIG_NET_NS is disabled:
# ip monitor
open("/proc/self/ns/net"): No such file or directory
If open "/proc/self/ns/net" failed, set have_rtnl_getnsid to false.
Fixes: d652ccbf81 ("netns: allow to dump and monitor nsid")
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
ftell() may return -1 in error case, which is not handled and
therefore pass a negative offset to fseek(). The return code of
fseek() is also not checked.
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
The new mode 'l3s' can be set like -
ip link add link <master> dev <IPvlan-slave> type ipvlan mode l3s
e.g. ip link add link eth0 dev ipvl0 type ipvlan mode l3s
Also did some trivial code restructuring.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
the maximum possible ICV length in a MACsec frame is 16 octects, not 32:
fix get_icvlen() accordingly, so that a proper error message is displayed
in case input 'icvlen' is greater than 16.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
use get_be64() in place of get_u64() when parsing input 'sci' parameter,
so that 'sci' can be entered using network byte order regardless the
endianness of target system; use ntohll() when printing out 'sci'. While
at it, improve documentation of 'sci' in ip-link.8.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
remove hardcoded base 10 parsing of 'port' parameter, update man page
and fix usage() functions as well. Fix misleading line in man page that
theoretically allowed specifying 'port' keyword right after 'sci' keyword.
Provide documentation of 'address' parameter in man pages and in usage()
functions as well.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Show which processes are using which tun/tap devices, e.g.:
$ ip -d tuntap
tun0: tun
Attached to processes: vpnc(9531)
vnet0: tap vnet_hdr
Attached to processes: qemu-system-x86(10442)
virbr0-nic: tap UNKNOWN_FLAGS:800
Attached to processes:
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
If we have multicast routes and do ip route show table all we'll get the
following output:
...
multicast ???/32 from ???/32 table default proto static iif eth0
The "???" are because the rtm_family is set to RTNL_FAMILY_IPMR instead
(or RTNL_FAMILY_IP6MR for ipv6). Add a simple workaround that returns the
real family based on the rtm_type (always RTN_MULTICAST for ipmr routes)
and the rtm_family. Similar workaround is already used in ipmroute, and
we can use this helper there as well.
After the patch the output is:
multicast 239.10.10.10/32 from 0.0.0.0/32 table default proto static iif eth0
Also fix a minor whitespace error and switch to tabs.
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
The code is a bit messy, as it starts with space after text and at some
point switches to space before text. But either way, printing space
before *and* after text almost certainly leads to printing more
whitespace than necessary.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Prior to this patch, If one route entry's RTA_PREFSRC and RTA_GATEWAY
both were NULL, it was supposed to be restored ONLY as a local address.
But as it didn't check tb[RTA_PREFSRC] when restoring local networks,
rtattr_cmp would return a success if it was NULL, this route entry would
be restored again as a local network.
This patch is to add tb[RTA_PREFSRC] check when restoring local networks.
Fixes: 74af8dd962 ("ip route: restore route entries in correct order")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Phil Sutter <phil@nwl.cc>
Currently, the `ip ila` command tries to initialize a genl context
even when we just want to see the help for the command, which doesn't
require to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: ec71cae0bb ("ila: Support for configuring ila to use netfilter hook")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Currently, the `ip fou` command tries to initialize a genl context even
when we just want to see the help for the command, which doesn't require
to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: 6928747b6e ("ip fou: Support to configure foo-over-udp RX")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Currently, the `ip macsec` command tries to initialize a genl context
even when we just want to see the help for the command, which doesn't
require to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: b26fc590ce ("ip: add MACsec support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
All users of genl have the same code to open a genl socket and resolve
the family for their specific protocol. Introduce a helper to initialize
the handle, and use it in all the genl code.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
since kernel driver has valid default values for 'cipher' and 'icvlen',
there is no need for requiring users to specify both of them when a new
link is added. Also, prompt an error message and exit with appropriate
exit status in case of unsupported cipher suite.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
fix output of "ip address help" and "ip link help". Update TYPE list in man
pages ip-address.8 and ip-link.8 as well.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Since parse_rtattr_flags() calls memset already, there is no need for
callers to do so themselves.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
This big patch was compiled by vimgrepping for memset calls and changing
to C99 initializer if applicable. One notable exception is the
initialization of union bpf_attr in tc/tc_bpf.c: changing it would break
for older gcc versions (at least <=3.4.6).
Calls to memset for struct rtattr pointer fields for parse_rtattr*()
were just dropped since they are not needed.
The changes here allowed the compiler to discover some unused variables,
so get rid of them, too.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Sometimes we cannot restore route entries, because in kernel
[1] fib_check_nh()
[2] fib_valid_prefsrc()
cause some routes to depend on existence of others while adding.
For example, we saved all the routes, and flushed all tables
[a] default via 192.168.122.1 dev eth0
[b] 192.168.122.0/24 dev eth0 src 192.168.122.21
[c] broadcast 127.0.0.0 dev lo table local src 127.0.0.1
[d] local 127.0.0.0/8 dev lo table local src 127.0.0.1
[e] local 127.0.0.1 dev lo table local src 127.0.0.1
[f] broadcast 127.255.255.255 dev lo table local src 127.0.0.1
[g] broadcast 192.168.122.0 dev eth0 table local src 192.168.122.21
[h] local 192.168.122.21 dev eth0 table local src 192.168.122.21
[i] broadcast 192.168.122.255 dev eth0 table local src 192.168.122.21
Now start to restore them:
If we want to add [a], we have to add [b] first, as [1] and
'via 192.168.122.1' in [a].
If we want to add [b], we have to add [h] first, as [2] and
'src 192.168.122.21' in [b].
So the correct order to restore should be like:
[e][h] -> [b][c][d][f][g][i] -> [a]
This patch fixes it by traversing the file 3 times, it only restores
part of them in each run according to the following conditions, to
make sure every entry can be restored successfully.
1. !gw && (!fib_prefsrc || fib_prefsrc == cfg->fc_dst)
2. !gw && (fib_prefsrc != cfg->fc_dst)
3. gw
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Add two NLA's that allow configuration of Infiniband node or port GUIDs
by referencing the IPoIB net device set over the physical function. The
format to be used is as follows:
ip link set dev ib0 vf 0 node_guid 00:02:c9:03:00:21:6e:70
ip link set dev ib0 vf 0 port_guid 00:02:c9:03:00:21:6e:78
Signed-off-by: Eli Cohen <eli@mellanox.com>
Add vrf keyword to 'ip route' commands. Allows:
1. Users can list routes by VRF name:
$ ip route show vrf NAME
VRF tables have all routes including local and broadcast routes.
The VRF keyword filters LOCAL and BROADCAST routes; to see all
routes the table option can be used. Or to see local routes only
for a VRF:
$ ip route show vrf NAME type local
2. Add or delete a route for a VRF:
$ ip route {add|delete} vrf NAME <route spec>
3. Do a route lookup for a VRF:
$ ip route get vrf NAME ADDRESS
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add ipvrf_get_table to lookup table id for device name. Returns 0
on any error or if name is not a VRF device.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add vrf keyword to 'ip neigh' commands. Allows listing neighbor
entries for all links associated with a given VRF.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add vrf keyword to 'ip link' and 'ip addr' commands (common list code).
Allows:
1. Adding a link to a VRF
$ ip link set NAME vrf NAME
Removing a link from a VRF still uses 'ip link set NAME nomaster'
2. Showing links associated with a VRF:
$ ip link show vrf NAME
3. List addresses associated with links in a VRF
$ ip -br addr show vrf red
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Since the function won't ever change the data 'kind' is pointing at, it
can sanely be made const.
Fixes: e0513807f6 ("ip-address: Support filtering by slave type, too")
Suggested-by: Stephen Hemminger <shemming@brocade.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Currently a timeout is multiplied by HZ in user-space and
then it multiplied by HZ in kernel-space.
$ ./ip/ip r add 2002::0/64 dev veth1 expires 10
$ ./ip/ip -6 r
2002::/64 dev veth1 metric 1024 linkdown expires 996sec pref medium
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Stephen Hemminger <shemming@brocade.com>
Fixes: 68eede2505 ("route: allow routes to be configured with expire values")
Signed-off-by: Andrew Vagin <avagin@virtuozzo.com>
This patch allows to query all interfaces enslaved to a bridge or bond
using the following syntax:
| ip addr show type bridge_slave
Filtering has to be done in userspace since the kernel does not support
filtering on IFLA_INFO_SLAVE_KIND.
Functionality introduced in this patch is not fully complete since it
does not allow to match on type and slave type at the same time, but it
doesn't prevent implementing a dedicated slave_type match, either.
Signed-off-by: Phil Sutter <phil@nwl.cc>
On Tue, Jun 21, 2016 at 06:18 PM CEST, Phil Sutter <phil@nwl.cc> wrote:
> By combining the attribute extraction and check for existence, the
> additional indentation level in the 'else' clause can be avoided.
>
> In addition to that, common actions for 'daddr' are combined since the
> function returns if neither of the branches are taken.
>
> Signed-off-by: Phil Sutter <phil@nwl.cc>
> ---
> ip/tcp_metrics.c | 45 ++++++++++++++++++---------------------------
> 1 file changed, 18 insertions(+), 27 deletions(-)
>
> diff --git a/ip/tcp_metrics.c b/ip/tcp_metrics.c
> index f82604f458ada..899830c127bcb 100644
> --- a/ip/tcp_metrics.c
> +++ b/ip/tcp_metrics.c
> @@ -112,47 +112,38 @@ static int process_msg(const struct sockaddr_nl *who, struct nlmsghdr *n,
> parse_rtattr(attrs, TCP_METRICS_ATTR_MAX, (void *) ghdr + GENL_HDRLEN,
> len);
>
> - a = attrs[TCP_METRICS_ATTR_ADDR_IPV4];
> - if (a) {
> + if ((a = attrs[TCP_METRICS_ATTR_ADDR_IPV4])) {
Copy the pointer inside the branch?
Same gain on indentation while keeping checkpatch happy.
I only compile-tested the patch below.
Thanks,
Jakub
I forgot to change the variable in the conditional, too.
Fixes: 8fe58d5894 ("iplink: Check address length via netlink")
Signed-off-by: Phil Sutter <phil@nwl.cc>
This is a feature which was lost during the conversion to netlink
interface: If the device exists and a user tries to change the link
layer address, query the kernel for the old address first and reject the
new one if sizes differ.
This patch adds the same check when setting VF address by assuming same
length as PF device.
Note that at least for VFs the check can't be done in kernel space since
struct ifla_vf_mac lacks a length field and due to netlink padding the
exact size can't be communicated to the kernel.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Kernel commit 96c63fa7393d ("net: Add l3mdev rule") added support for
the FRA_L3MDEV attribute. The attribute enables use of l3mdev rules
which mean 'get table id from l3 master device'. This patch adds
support to iproute2 to show, add and delete rules with this attribute.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Not sure why this was limited to ip-link before. It is semantically
equal to the 'master' keyword, which is not restricted at all.
The man page and help text adjustments include the 'master' keyword as
well since that is also supported but wasn't documented before.
Cc: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Extend ip-link to create MACsec devices
ip link add link <master> <macsec> type macsec [options]
Add `ip macsec` command to configure receive-side secure channels and
secure associations within a macsec netdevice.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Phil Sutter <phil@nwl.cc>
Similar to the Linux kernel and perf add infrastructure to reduce the
amount of output tossed to a user during a build. Full build output
can be obtained with 'make V=1'
Builds go from:
make[1]: Leaving directory `/home/dsa/iproute2.git/lib'
make[1]: Entering directory `/home/dsa/iproute2.git/ip'
gcc -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wformat=2 -O2 -I../include -DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c -o ip.o ip.c
gcc -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wformat=2 -O2 -I../include -DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c -o ipaddress.o ipaddress.c
to:
...
AR libutil.a
ip
CC ip.o
CC ipaddress.o
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
A new HSR version was added in 4.7 that can be enabled
via iproute2. Per default the old version is selected,
however, with "ip link add [..] type hsr [..] version 1"
the newer version can be enabled.
Signed-off-by: Peter Heise <peter.heise@airbus.com>
Kernel gained support for filtering link dumps with commit dc599f76c22b
("net: Add support for filtering link dump by master device and kind").
Add support to ip link command. If a user passes master device or
kind to ip link command they are added to the link dump request message.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Since we can only configure unicast, we probably want to be able to
display unicast, rather than multicast.
Fixes: 906ac5437a ("geneve: add support for IPv6 link partners")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Display only attributes that are relevant when a GRE interface is in
'external' mode instead of the default values (which are ignored by the
kernel even if passed back).
Fixes: 926b39e1fe ("gre: add support for collect metadata flag")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
For GRE interfaces in 'external' mode, the kernel ignores all manual
settings like remote IP address or TTL. However, for some of those
attributes, kernel checks their value and does not allow them to be zero
(even though they're ignored later).
Currently, 'ip link' always includes all attributes in the netlink message.
This leads to problem with creating interfaces in 'external' mode. For
example, this command does not work:
ip link add gre1 type gretap external
and needs a bogus remote IP address to be specified, as the kernel enforces
remote IP address to be either not present, or not null.
Ignore the parameters that do not make sense in 'external' mode.
Unfortunately, we cannot error out, as there may be existing deployments
that workarounded the bug by specifying bogus values.
Fixes: 926b39e1fe ("gre: add support for collect metadata flag")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Use the same rtnl_dump_request_n call as the show. The rtnl_wilddump_request
assumes the type uses an ifinfomsg which is not the case for the neighbor
table.
Signed-off-by: Jeff Harris <jefftharris@gmail.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
It doesn't make sense to use external control plane and fill internal FDB at
the same time. It's even an illegal combination for VXLAN-GPE.
Just switch off learning when 'external' is specified.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Follow-up for kernel commit 8eb3b99554b8 ("geneve: support setting
IPv6 flow label") to allow setting the label for the device config.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Follow-up for kernel commit e7f70af111f0 ("vxlan: support setting
IPv6 flow label") to allow setting the label for the device config.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Enable support for configuring outer UDP checksums on Geneve tunnels:
ip link add type geneve id 10 remote 10.0.0.2 udpcsum
Signed-off-by: Jesse Gross <jesse@kernel.org>
On recent kernels, UDP checksum computation has become more efficient and
the default behavior was changed, however, the ip command overrides this
by always specifying a particular behavior.
If the user does not specify that UDP checksums should either be computed
or not then we don't need to send an explicit netlink message - the kernel
can just use its default behavior.
Signed-off-by: Jesse Gross <jesse@kernel.org>
There is only a single user who needs it to be reentrant (not really,
but it's safer like this), add rt_addr_n2a_r() for it to use.
Signed-off-by: Phil Sutter <phil@nwl.cc>
There are only three users which require it to be reentrant, the rest is
fine without. Instead, provide a reentrant format_host_r() for users
which need it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This adds two helper functions which map a given data field to a color,
so color_fprintf() statements don't have to be duplicated with only a
different color value depending on that data field's value. In order for
this to work in a generic way, COLOR_CLEAR has been added to serve as a
fallback default of uncolored output.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Add support for ignore route attribute, and refine the code to use
rta_getattr_* function to get attribute value.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
To not make the output overly confusing, list them in a definition of
the STATE placeholder which is already used in the show/flush syntax but
wasn't explained before.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This is a bit pedantic, but brackets ([]) show optional values and since
TYPE must not become empty, they're not suited to surround the type
keyword choices. Use curly braces instead.
Also add some missing whitespace to the parameter list above.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Neither 'list' nor 'flush' actions accept parameters, and with given
prefix the action keyword is not optional anymore.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Although the ip command accepts both "neighbor" and "neighbour" as
subcommand, I assume it's sufficient to list it in help text as just
"neigh" like ip.8 does.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Amir Vadai
Stephen Hemminger
Zhang Shengju
Stephen Hemminger
Asbjørn Sloth Tønnesen
Daniel Hopf
david decotigny
michael-dev@fami-braun.de
Lorenzo Colitti
Phil Sutter
Nikolay Aleksandrov
Hangbin Liu
Moshe Shemesh
Anton Aksola
Igor Ryzhov
Alexei Starovoitov
Jiri Benc
Liping Zhang
Mahesh Bandewar
Davide Caratti
Thomas Graf
Andrey Jr. Melnikov
Hannes Frederic Sowa
Eric Dumazet
Xin Long
Sabrina Dubroca
Tom Herbert
Stephen Hemminger
Shanker Wang
Eli Cohen
David Ahern
Andrew Vagin
Jakub Sitnicki
Daniel Borkmann
Peter Heise
Kylie McClain
Edward Cree
Jeff Harris
Nicolas Dichtel
Jiri Pirko
Jesse Gross