This patch adds basic support for Qualcomm rmnet devices.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, iproute allows setting those flags, but it's impossible to
clear them, since their current value is fetched from the kernel and
then we OR in the additional flags passed on the command line.
Add no* variants to allow clearing them.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
GRE tunnels are currently only documented together with IPIP and SIT
tunnels, but they actually have very different configuration
options. Let's separate them.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
For IP-in-IP tunnels, one can specify the [no]allow-localremote command
when configuring a device. Under the hood, this flips the
IP6_TNL_F_ALLOW_LOCAL_REMOTE flag on the netdevice. However, ip6gretap
and ip6erspan devices, where the flag is also relevant, are not IP-in-IP
tunnels, and thus there's no way to configure the flag on these
netdevices. Therefore introduce the command to link_gre6 as well.
The original support was introduced in commit 21440d19d9
("ip: link_ip6tnl.c/ip6tunnel.c: Support IP6_TNL_F_ALLOW_LOCAL_REMOTE flag")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Zero value in min/max_tx_rate has a special meaning of no rate limit,
document it.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
netdevsim is a new software device for testing kernel APIs
without any hardware attached. Allow users to create such
devices.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Lintian detected the following formatting errors:
man/man8/devlink-sb.8.gz 230: warning: macro `b' not defined
man/man8/ip-link.8.gz 1243: warning: macro `in-8' not defined
(possibly missing space after `in')
man/man8/tc-u32.8.gz `R' is a string (producing the registered sign),
not a macro.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The patch adds support for configuring the erspan v2, for both
ipv4 and ipv6 erspan implementation. Three additional fields
are added: 'erspan_ver' for distinguishing v1 or v2, 'erspan_dir'
for specifying direction of the mirrored traffic, and 'erspan_hwid'
for users to set ERSPAN engine ID within a system.
As for manpage, the ERSPAN descriptions used to be under GRE, IPIP,
SIT Type paragraph. Since IP6GRE/IP6GRETAP also supports ERSPAN,
the patch removes the old one, creates a separate ERSPAN paragrah,
and adds an example.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
veth and vxcan both create a vitual tunnel between a pair of virtual network
devices. This patch adds the content for the now supported vxcan netdevices
and the documentation to create peer devices for vxcan and veth.
Additional remove 'can' that accidently was on the list of link types which
can be created by 'ip link add' as 'can' devices are real network devices.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The patch adds 'external' option to support collect metadata
gre6 tunnel. The 'external' keyword is already used to set the
device into collect metadata mode such as vxlan, geneve, ipip,
etc. This patch extends support for ipv6 gre and gretap.
Example of L3 and L2 gre device:
bash:~# ip link add dev ip6gre123 type ip6gre external
bash:~# ip link add dev ip6gretap123 type ip6gretap external
Signed-off-by: William Tu <u9012063@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Validate the upper limit for gso_max_size, valid range is [0-65,536]
inclusive. Fix minor whitespace in iplink man page.
Signed-off-by: Solio Sarabia <solio.sarabia@intel.com>
This allows sending GSO maximum values when configuring a device.
The values are advisory. Most devices will ignore them but for some
pseudo devices such as veth pairs they can be set.
Example:
# ip link add dev vm1 type veth peer name vm2 gso_max_size 32768
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
This config maps to IFLA_BRPORT_VLAN_TUNNEL bridge port netlink
flag attribute. This flag enables vlan to tunnel mapping on a bridge
port. It is off by default.
set vlan_tunnel attribute on bridge port vxlan0:
$ip link set dev vxlan0 type bridge_slave vlan_tunnel on
$ip link set dev vxlan0 type bridge_slave vlan_tunnel off
or via bridge command
$bridge link set dev vxlan0 vlan_tunnel on
$bridge link set dev vxlan0 vlan_tunnel off
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Add neigh_suppress to the type help and document it in ip-link's man page.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds the iproute2 support for getting and setting the
per-port group_fwd_mask. It also tries to resolve the value into a more
human friendly format by printing the known protocols instead of only
the raw value.
The man page is also updated with the new option.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
The patch adds ERSPAN type II tunnel support. The implementation is
based on the draft at
https://tools.ietf.org/html/draft-foschiano-erspan-01.
One of the purposes is for Linux box to be able to receive ERSPAN
monitoring traffic sent from the Cisco switch, by creating a ERSPAN
tunnel device. In addition, the patch also adds ERSPAN TX, so traffic
can also be encapsulated into ERSPAN and sent out.
The implementation reuses the key as ERSPAN session ID, and
field 'erspan' as ERSPAN Index fields:
./ip link add dev ers11 type erspan seq key 100 erspan 123 \
local 172.16.1.200 remote 172.16.1.100
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Meenakshi Vohra <mvohra@vmware.com>
Let XDP link set command request that the program be offloaded.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Allow user to select XDP DRV_MODE flag by using xdpdrv keyword
instead of xdp or xdpgeneric.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Add to usage message a description of how to configure Infiniband node
and port GUIDs. Also modify the man page to emphasize the GUIDs are
configured for Infiniband VFs.
Fixes: d91fb3f4c7 ("Add support for configuring Infiniband GUIDs")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Follow-up to commit c7272ca720 ("bpf: add initial support for
attaching xdp progs") to also support generic XDP. This adds an
indicator for loaded generic XDP programs when programs are loaded
as shown in c7272ca720, but the driver still lacks native XDP
support.
# ip link
[...]
3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdpgeneric qdisc [...]
link/ether 0c:c4:7a:03:f9:25 brd ff:ff:ff:ff:ff:ff
[...]
In case the driver does support native XDP, but the user wants
to load the program as generic XDP (e.g. for testing purposes),
then this can be done with the same semantics as in c7272ca720,
but with 'xdpgeneric' instead of 'xdp' command for loading:
# ip -force link set dev eno1 xdpgeneric obj xdp.o
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David S. Miller <davem@davemloft.net>
Add support for new afstats subcommand. This uses the new
IFLA_STATS_AF_SPEC attribute of RTM_GETSTATS messages to show
per-device, AF-specific stats. At the moment the kernel only supports
MPLS AF stats, so that is all that's implemented here.
The print_num function is exposed from ipaddress.c to be used for
printing the new stats so that the human-readable option, if set, can
be respected.
Example of use:
$ ./ip/ip -f mpls link afstats dev eth1
3: eth1
mpls:
RX: bytes packets errors dropped noroute
9016 98 0 0 0
TX: bytes packets errors dropped
7232 113 0 0
Signed-off-by: Robert Shearman <rshearma@brocade.com>
This patch adds support for a new xstats link subcommand which uses the
specified link type's new parse/print_ifla_xstats callbacks to display
extended statistics.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Now that we made the BPF loader generic as a library, reuse it
for loading XDP programs as well. This basically adds a minimal
start of a facility for iproute2 to load XDP programs. There
currently only exists the xdp1_user.c sample code in the kernel
tree that sets up netlink directly and an iovisor/bcc front-end.
Since we have all the necessary infrastructure in place already
from tc side, we can just reuse its loader back-end and thus
facilitate migration and usability among the two for people
familiar with tc/bpf already. Sharing maps, performing tail calls,
etc works the same way as with tc. Naturally, once kernel
configuration API evolves, we will extend new features for XDP
here as well, resp. extend dumping of related netlink attributes.
Minimal example:
clang -target bpf -O2 -Wall -c prog.c -o prog.o
ip [-force] link set dev em1 xdp obj prog.o # attaching
ip [-d] link # dumping
ip link set dev em1 xdp off # detaching
For the dump, intention is that in the first line for each ip
link entry, we'll see "xdp" to indicate that this device has an
XDP program attached. Once we dump some more useful information
via netlink (digest, etc), idea is that 'ip -d link' will then
display additional relevant program information below the "link/
ether [...]" output line for such devices, for example.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
v5:
- rebase and fix checkpatch
v4:
- add MACADDR_SET support
- skip FLAG_UNICAST / FLAG_UNICAST_ALL as this is not upstream
- fix man page
Recently a new per-port flag was added which controls the flooding of
unknown multicast, this patch adds support for controlling it via iproute2.
It also updates the man pages with information about the new flag.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
Introduce a new API that exposes a list of vlans per VF (IFLA_VF_VLAN_LIST),
giving the ability for user-space application to specify it for the VF as
an option to support 802.1ad (VST QinQ).
We introduce struct vf_vlan_info, which extends struct vf_vlan and adds
an optional VF VLAN proto parameter.
Default VLAN-protocol is 802.1Q.
Add IFLA_VF_VLAN_LIST in addition to IFLA_VF_VLAN to keep backward
compatibility with older kernel versions.
Suitable ip link tool command examples:
- Set vf vlan protocol 802.1ad (S-TAG)
ip link set eth0 vf 1 vlan 100 proto 802.1ad
- Set vf vlan S-TAG and vlan C-TAG (VST QinQ)
ip link set eth0 vf 1 vlan 100 proto 802.1ad vlan 30 proto 802.1Q
- Set vf to VST (802.1Q) mode
ip link set eth0 vf 1 vlan 100 proto 802.1Q
- Or by omitting the new parameter (backward compatible)
ip link set eth0 vf 1 vlan 100
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
use get_be64() in place of get_u64() when parsing input 'sci' parameter,
so that 'sci' can be entered using network byte order regardless the
endianness of target system; use ntohll() when printing out 'sci'. While
at it, improve documentation of 'sci' in ip-link.8.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
remove hardcoded base 10 parsing of 'port' parameter, update man page
and fix usage() functions as well. Fix misleading line in man page that
theoretically allowed specifying 'port' keyword right after 'sci' keyword.
Provide documentation of 'address' parameter in man pages and in usage()
functions as well.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
This adds missing documentation of geneve type options:
- dstport
- external
- udpcsum
- udp6zerocsumtx
- udp6zerocsumrx
The bits for the last three was just copy and pasted from vxlan section.
Signed-off-by: Phil Sutter <phil@nwl.cc>
since kernel driver has valid default values for 'cipher' and 'icvlen',
there is no need for requiring users to specify both of them when a new
link is added. Also, prompt an error message and exit with appropriate
exit status in case of unsupported cipher suite.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
fix output of "ip address help" and "ip link help". Update TYPE list in man
pages ip-address.8 and ip-link.8 as well.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Daniele Palmas
Sabrina Dubroca
Petr Machata
David Ahern
Gal Pressman
Jakub Kicinski
Luca Boccassi
Serhey Popovych
William Tu
Oliver Hartkopp
Solio Sarabia
Stephen Hemminger
Roopa Prabhu
Roman Mashak
Nikolay Aleksandrov
Krister Johansen
Eli Cohen
Daniel Borkmann
Phil Sutter
Robert Shearman
Hangbin Liu
michael-dev@fami-braun.de
Moshe Shemesh
Davide Caratti