As David Laight correctly pointed out, the first version of strlcpy()
modified dst buffer behind the string copied into it. Fix this by
writing NUL to the byte immediately following src string instead of to
the last byte in dst. Doing so also allows to reduce overhead by using
memcpy().
Improve strlcat() by avoiding the call to strlcpy() if dst string is
already full, not just as sanity check.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Consolidate dump of prog info to use bpf_dump_prog_info() when possible.
Moving forward, we want to have a consistent output for BPF progs when
being dumped. E.g. in cls/act case we used to dump tag as a separate
netlink attribute before we had BPF_OBJ_GET_INFO_BY_FD bpf(2) command.
Move dumping tag into bpf_dump_prog_info() as well, and only dump the
netlink attribute for older kernels. Also, reuse bpf_dump_prog_info()
for XDP case, so we can dump tag and whether program was jited, which
we currently don't show.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Just minor nits, e.g. no need to fflush() and instead of returning
right away, just break and close the fd.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The signedness of char type is implementation dependent, and there are
architectures on which it is unsigned by default. In that case, the
check whether fgetc() returned EOF failed because the return value was
assigned an (unsigned) char variable prior to comparison with EOF (which
is defined to -1). Fix this by using int as type for 'c' variable, which
also matches the declaration of fgetc().
While being at it, fix the parser logic to correctly handle multiple
empty lines and consecutive whitespace and tab characters to further
improve the parser's robustness. Note that this will still detect double
separator characters, so doesn't soften up the parser too much.
Fixes: 3da3ebfca8 ("bpf: Make bytecode-file reading a little more robust")
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
By making use of strncpy(), both implementations are really simple so
there is no need to add libbsd as additional dependency.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Both addattr_l() and rta_addattr_l() may be called with NULL data
pointer and 0 alen parameters. Avoid calling memcpy() in that case.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Calling stat() before mkdir() is racey: The entry might change in
between. Also, the call to stat() seems to exist only to check if the
directory exists already. So simply call mkdir() unconditionally and
catch only errors other than EEXIST.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This is merely to silence the compiler warning. If write to stderr
failed, assume that printing an error message will fail as well so don't
even try.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Instead of having a fixed buffer of 16 bytes for the interface name,
tailor size of new ll_cache entry using the interface name's actual
length. This also makes sure the following call to strcpy() is safe.
Signed-off-by: Phil Sutter <phil@nwl.cc>
The original intent was to make sure strings written by those functions
are NUL-terminated at all times, though it was suggested to get rid of
the 15 char protocol name limit as well which this patch accomplishes.
In addition to that, simplify inet_proto_a2n() a bit: Use the error
checking in get_u8() to find out whether passed 'buf' contains a valid
decimal number instead of checking the first character's value manually.
Signed-off-by: Phil Sutter <phil@nwl.cc>
A field width of 4096 allows fscanf() to store that amount of characters
into the given buffer, though that doesn't include the terminating NULL
byte. Decrease the value by one to leave space for it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This renames Config to config.mk and includes more Make input.
Now configure generates all the required CFLAGS and LDLIBS for
the optional libraries.
Also, use pkg-config to test for libelf, rather than using a test
program. This makes it consistent with other libraries.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If fopen() succeeded but len != PATH_MAX, the function leaks the open
FILE pointer. Fix this by checking len value before calling fopen().
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Since 'id' is 32bit unsigned, it can never exceed RT_TABLE_MAX (which is
defined to 0xFFFFFFFF). Therefore drop that never matching conditional.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Initialize tb in nl_dump_ext_err since not all attributes will be
sent in the messages.
Add error checking on mnl_attr_parse and print messages on the off
chance the ext ack attributes fail to validate.
Signed-off-by: David Ahern <dsahern@gmail.com>
Commit 69fed534a5 ("change how Config is used in Makefile's") moved
HAVE_MNL specific CFLAGS/LDLIBS for building with libmnl out of the
top level Makefile into sub-Makefiles. However, it also removed the
HAVE_ELF specific CFLAGS/LDLIBS entirely, which breaks the BPF object
loader for tc and ip with "No ELF library support compiled in." despite
having libelf detected in configure script. Fix it similarly as in
69fed534a5 for HAVE_ELF.
Fixes: 69fed534a5 ("change how Config is used in Makefile's")
Reported-by: Jeffrey Panneman <jeffrey.panneman@tno.nl>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In time, errfn can be implemented for link, route, etc commands to
give a much more detailed response (e.g., point to the attribute
that failed). Doing so is much more complicated to process the
message and convert attribute ids to names.
In any case the error string returned by the kernel should be dumped
to the user, so make that happen now.
Signed-off-by: David Ahern <dsahern@gmail.com>
The code was always building without libmnl support, so it was
doing nothing.
Fixes: b6432e68ac ("iproute: Add support for extended ack to rtnl_talk")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for extended ack error reporting via libmnl.
Add a new function rtnl_talk_extack that takes a callback as an input
arg. If a netlink response contains extack attributes, the callback is
is invoked with the the err string, offset in the message and a pointer
to the message returned by the kernel.
If iproute2 is built without libmnl, it will still work but
extended error reports from kernel will not be available.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Both functions take the desired address family as a parameter. So using
that to notify the user what address family was expected is correct,
unlike using dst->family which will tell the user only what address
family was specified.
The situation which commit 334af76143 tried to fix was when 'ip'
would accept addresses from multiple families. In that case, the family
parameter is set to AF_UNSPEC so that get_addr_1() may accept any valid
address.
This patch introduces a wrapper around family_name() which returns the
string "any valid" for AF_UNSPEC instead of the three question marks
unsuitable for use in error messages.
Tests for AF_UNSPEC:
| # ip a a 256.10.166.1/24 dev d0
| Error: any valid prefix is expected rather than "256.10.166.1/24".
| # ip neighbor add proxy 2001:db8::g dev d0
| Error: any valid address is expected rather than "2001:db8::g".
Tests for explicit address family:
| # ip -6 addrlabel add prefix 1.1.1.1/24 label 123
| Error: inet6 prefix is expected rather than "1.1.1.1/24".
| # ip -4 addrlabel add prefix dead:beef::1/24 label 123
| Error: inet prefix is expected rather than "dead:beef::1/24".
Reported-by: Jaroslav Aster <jaster@redhat.com>
Fixes: 334af76143 ("fix get_addr() and get_prefix() error messages")
Signed-off-by: Phil Sutter <phil@nwl.cc>
bpf_parse_string() will now correctly handle:
- Extraneous whitespace,
- OPs on multiple lines and
- overlong file names.
The added feature of allowing to have OPs on multiple lines (like e.g.
tcpdump prints them) is rather a side effect of fixing detection of
malformed bytecode files having random content on a second line, like
e.g.:
| 4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0
| foobar
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
When we get a multicast route, the rtm_type is RTN_MULTICAST, but the
rtm_family may be AF_INET. If we only check the type with RTNL_FAMILY_IPMR,
we will get malformed address. e.g.
+ ip -4 route add multicast 172.111.1.1 dev em1 table main
Before fix:
+ ip route list type multicast table main
multicast ac6f:101:800:400:400:0:3c00:0 dev em1 scope link
After fix:
+ ip route list type multicast table main
multicast 172.111.1.1 dev em1 scope link
Fixes: 56e3eb4c34 ("ip: route: fix multicast route dumps")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
When bpf fs mount path is from env, behavior is currently broken as
we continue to search in default paths, thus fix this up.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, it's still quite hard to figure out if a prog passed the
verifier, but later gets rejected due to different tail call ownership.
Figure out whether that is the case and provide appropriate error
messages to the user.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make use of TCA_BPF_ID/TCA_ACT_BPF_ID that we exposed and print the ID
of the programs loaded and use the new BPF_OBJ_GET_INFO_BY_FD command
for dumping further information about the program, currently whether
the attached program is jited.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add support for map in map in the loader and add a small example program.
The outer map uses inner_id to reference a bpf_elf_map with a given ID
as the inner type. Loading maps is done in three passes, i) all non-map
in map maps are loaded, ii) all map in map maps are loaded based on the
inner_id map spec of a non-map in map with corresponding id, and iii)
related inner maps are attached to the map in map with given inner_idx
key. Pinned objetcs are assumed to be managed externally, so they are
only retrieved from BPF fs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When LLVM wrongly generates a rodata relo entry (llvm BZ #33599),
then just bail out instead of probing for prog w/o reloc, which
will fail in this case anyway.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
I noticed we currently don't dump an error message when a pinned
program couldn't be retrieved, thus add a hint to the user.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The original code which became rtnl_dump_done only shows netlink errors
if the protocol is NETLINK_SOCK_DIAG, but netlink dumps always appends
the length which contains any error encountered during the dump. Update
rtnl_dump_done to always show the error if there is one.
As an *example* without this patch, dumping a route object that exceeds
the internal buffer size terminates with no message to the user -- the
dump just ends because the NLMSG_DONE attribute was received. With this
patch the user at least gets a message that the dump was aborted.
$ ip ro ls
default via 10.0.2.2 dev eth0
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
10.10.0.0/16 dev veth1 proto kernel scope link src 10.10.0.1
172.16.1.0/24 dev br0.11 proto kernel scope link src 172.16.1.1
Error: Buffer too small for object
Dump terminated
The point of this patch is to notify the user of a failure versus
silently exiting on a partial dump. Because the NLMSG_DONE attribute
was received, the entire dump needs to be restarted to use a larger
buffer for EMSGSIZE errors. That could be done automatically but it
has other user impacts (e.g., duplicate output if the dump is
restarted) and should be the subject of a different patch.
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel now supports up to 30 labels but not defined as part of the uapi.
iproute2 handles up to 8 labels but in a non-consistent way. Update ip
to handle more labels, but in a more programmatic way.
For the MPLS address family, the data field in inet_prefix is used for
labels. Increase that field to 64 u32's -- 64 as nothing more than a
convenient power of 2 number.
Update mpls_pton to take the length of the address field, convert that
length to number of labels and add better error handling to the parsing
of the user supplied string.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
If the kernel returns more labels than iproute2 expects, none of
the labels are printed and (null) is shown instead:
$ ip -f mpls ro ls
101 as to (null) via inet 172.16.2.2 dev virt12
201 as to 202/203 via inet6 2001:db8:2::2 dev virt12
Remove the use of MPLS_MAX_LABELS and rely on buffer length that is
passed to mpls_ntop. With this change ip can print the label stack
returned by the kernel up to 255 characters (limit is due to size of
buf passed in) which amounts to 31 labels with a separator.
With this change the above is:
$ ip/ip -f mpls ro ls
101 as to 102/103/104/105/106/107/108/109/110 via inet 172.16.2.2 dev virt12
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
'ip vrf pids' is used to list processes bound to a vrf, but it only
shows the pid leaving a lot of work for the user. Add the command
name to the output. With this patch you get the more user friendly:
$ ip vrf pids mgmt
1121 ntpd
1418 gdm-session-wor
1488 gnome-session
1491 dbus-launch
1492 dbus-daemon
1565 sshd
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Allow callers of the dump API to handle nlmsg errors (e.g., an
unsupported feature). Setting RTNL_HANDLE_F_SUPPRESS_NLERR in the
rtnl_handle avoids unnecessary messages to the users in some case.
For example,
RTNETLINK answers: Operation not supported
when probing for support of a new feature.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Jan-Erik reported an assertion in bpf_prog_to_subdir() failed where
type was BPF_PROG_TYPE_UNSPEC, which is only used in bpf_init_env()
to auto-mount and cache the bpf fs mount point.
Therefore, make sure when bpf_init_env() is called multiple times
(f.e. eBPF classifier with eBPF action attached) and bpf_mnt_cached
is set already that the type is also valid. In bpf_init_env(), we're
only interested in the mount point and not a type-specific subdir.
Fixes: e42256699c ("bpf: make tc's bpf loader generic and move into lib")
Reported-by: Jan-Erik Rediger <janerik@rediger.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
COLORFGBG environment variable is used to detect dark background.
Idea and a bit of code is borrowed from Vim, thanks.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Phil Sutter
Stephen Hemminger
Daniel Borkmann
David Ahern
Julien Fortin
Hangbin Liu
David Ahern
Petr Vorel