The kernel interface changed just before 2.6.34 was released. This brings
iproute2 in line with the current changes. The VF portion of setlink is
comprised of a set of nested attributes.
IFLA_VFINFO_LIST (NESTED)
IFLA_VF_INFO (NESTED)
IFLA_VF_MAC
IFLA_VF_VLAN
IFLA_VF_TX_RATE
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
ip addrlabel outputs if%d names due to missing init call:
$ ip addrlabel s
prefix a::42/128 dev if4 label 1000
Also, ip did not accept "if%d" interfaces on input.
Signed-off-by: Florian Westphal <fw@strlen.de>
This patch fix two issues:
* If kernel is not supporting 6rd then ioctl() call
will return EINVAL, if so just skip perror call.
* 6rd scope is ipv6/ip tunnels. Dont try to fetch
6rd tunnel parms if tunnel protocol != IPPROTO_IPV6.
Signed-off-by: Alexandre Cassen <acassen@freebox.fr>
Allow ip to process all the file passed with the -batch argument when
is passed also the -force switch
Signed-off-by: Michele Petrazzo <michele.petrazzo@unipex.it>
This patch uses the new features of the kernel's netlink CAN interface
making the bus-error reporting configurable and allowing to retrieve
the CAN TX and RX bus error counters via netlink interface. Here is the
output of my test session showing how to use them:
# ip link set can0 up type can bitrate 500000 berr-reporting on
# ip -d -s link show can0
2: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UNKNOWN qlen 10
link/can
can <BERR-REPORTING> state ERROR-PASSIVE (berr-counter tx 128 rx 0) restart-ms 0
CAN bus error counter values ^^^^^^^^^^^
bitrate 500000 sample-point 0.875
tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1
sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
clock 8000000
re-started bus-errors arbit-lost error-warn error-pass bus-off
0 54101 0 1 1 0
RX: bytes packets errors dropped overrun mcast
432808 54101 54101 0 0 0
TX: bytes packets errors dropped carrier collsns
0 0 0 0 0 0
# ifconfig can0 down
# ip link set can0 up type can berr-reporting off
# candump -t d any,0:0,#FFFFFFFF
(0.000000) can0 20000004 [8] 00 08 00 00 00 00 60 00 ERRORFRAME
(0.000474) can0 20000004 [8] 00 20 00 00 00 00 80 00 ERRORFRAME
^^ ^^
\ \___ rxerr
\_____ txerr
Furthermore, the missing support for one-shot mode has been added.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Add support to 'ip' for setting and showing SR-IOV virtual function
link parameters.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add initrwnd option parsing to iproute. This option uses the new
rtnetlink init_rcvwnd to set the TCP initial receive window size
advertised by passive and active TCP connections.
Signed-off-by: Laurent Chavey <chavey@google.com>
This patch provides iproute2 facilities to configure 6rd tunnel. To
configure a 6rd tunnel, you need to configure a sit tunnel and set
6rd prefix as following :
ip tunnel add sit1 mode sit local a.b.c.d ttl 64
ip tunnel 6rd dev sit1 6rd-prefix xxxx:yyyy::/z
Optionally you can provide a relay prefix :
ip tunnel 6rd dev sit1 6rd-relay_prefix e.f.g.h/i
Finally you can reset previous tunnel settings :
ip tunnel 6rd dev sit1 6rd-reset
Signed-off-by: Alexandre Cassen <acassen@freebox.fr>
IPv6 addresses that have IFA_F_SECONDARY set are actually temporary addresses,
hence the IFA_F_TEMPORARY equivalent. Change the output in this case and
allow filtering on the word "temporary".
Signed-off-by: Brian Haley <brian.haley@hp.com>
Currently you can configure "equalize" and it looks all fine and dandy.
The kernel has the interface defined, but apparently there's never actually
been any implementation for it (only a never merged patch in the 2.4 era).
I'm suggesting to drop the code to give any potential users of this feature
the benefit of receiving a proper error message. I see it unlikely that
this will be implemented in the near future, but if it ever happens
reviving the iproute2 side should be as easy as git revert this patch.
For more details see http://bugs.debian.org/149897
Allow tmpl IP addresses to have a different family than
selector addresses. This is useful in conjunction with
XFRM_STATE_AF_UNSPEC.
Signed-off-by: Alex Badea <abadea@ixiacom.com>
Macvlan can now optionally support forwarding between its
ports, if they are in "bridge" mode. This adds support
for this option to "ip link add", "ip link set" and "ip
-d link show".
The default mode in the kernel is now "vepa" mode, meaning
"virtual ethernet port aggregator". This mode is used
together with the "hairpin" mode of an ethernet bridge
that the parent of the macvlan device is connected to.
All frames still get sent out to the external interface,
but the adjacent bridge is able to send them back on
the same wire in hairpin mode, so the macvlan ports
are able to see each other, which the bridge can be
configured to monitor and control traffic between
all macvlan instances. Multicast traffic coming in
from the external interface is checked for the source
MAC address and only delivered to ports that have not
yet seen it.
In bridge mode, macvlan will send all multicast traffic
to other interfaces that are also in bridge mode but
not to those in vepa mode, which get them on the way
back from the hairpin.
The third supported mode is "private", which prevents
communication between macvlans even if the adjacent
bridge is in hairpin mode. This behavior is closer to
the original implementation of macvlan but stricly
maintains isolation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
David Miller wrote:
> From: Patrick McHardy <kaber@trash.net>
> Date: Mon, 30 Nov 2009 19:00:14 +0100
>
>> This patch contains iproute support for iprule oif classification
>> for the send-to-self RFC I just sent out.
>
> Patrick, you need to submit a new version of this patch with
> the FIB_RULE_* macro fixed, just like the kernel version got
> fixed.
Thanks for reminind me of this. New patch attached.
commit 0fe5164cbaa1d65dda341075710be71bf1f32d10
Author: Patrick McHardy <kaber@trash.net>
Date: Fri Dec 4 07:06:18 2009 +0100
iprule: add oif classification support
Signed-off-by: Patrick McHardy <kaber@trash.net>
This patch adds support for the VLAN loose binding flag that is
supported in net-next to iplink_vlan.
commit 870970deb6cbea7a5d4881bdd717304d5284d315
Author: Patrick McHardy <kaber@trash.net>
Date: Tue Dec 1 12:21:15 2009 +0100
iplink_vlan: add support for VLAN loose binding flag
Signed-off-by: Patrick McHardy <kaber@trash.net>
Unless promote_secondaries has been active deleting the primary address of
an interface will automatically delete all the secondary addresses.
In the case where ip flush requests the primary then secondary addresses to
be removed - which is the order the addresses are returned by the kernel -
this will cause an error as by the time the request to remove a secondary
address is made it will be missing as it will have been deleted in the
course of deleting the primary address.
This approach to solving this problem orders requests for the
deletion of secondary addresses before primary ones providing
rtnl_dump_filter_l(), a version of rtnl_dump_filter() that
iterates over a list of filters. And by providing two specialised
filters print_addrinfo_secondary() and print_addrinfo_primary().
rtnl_dump_filter_l() first iterates over all addresses using
print_addrinfo_secondary(), which appends secondary addresses to the
request buffer. Then again using print_addrinfo_primary() which appends
primary addresses.
This approach should work regardless of it promote_secondaries is
active or not. And regardless of if any primary of secondary addresses
are present or not.
Signed-off-by: Simon Horman <horms@verge.net.au>
The command "ip mroute show" will only show the first Oif.
mark@flappie:~$ ip mroute show
(192.168.1.1, 224.0.0.123) Iif: _rename Oifs: eth1
mark@flappie:~$ cat /proc/net/ip_mr_cache
Group Origin Iif Pkts Bytes Wrong Oifs
7B0000E0 0101A8C0 2 0 0 0 0:1 1:1
This shows 2 Oifs here. However, ipmroute.c, function read_mroute_list(), uses sscanf() with a %s mask for oiflist, which stops after the first whitespace (i.e. after Oif 0:1). The patch below fixes this to read until the newline (though I'm not sure whether this is the proper way to fix it).
After this patch:
mark@flappie:~/iproute-20090324/ip$ ./ip mroute show
(192.168.1.1, 224.0.0.123) Iif: _rename Oifs: eth1 eth0
This patch originally submitted as http://bugs.debian.org/550097
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Add IFA_F_DADFAILED flag to denote an IPv6 address that has
failed Duplicate Address Detection, that way tools like
/sbin/ip can be more informative.
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
inet6 2001:db8::1/64 scope global tentative dadfailed
valid_lft forever preferred_lft forever
Signed-off-by: Brian Haley <brian.haley@hp.com>
- Parse and handle the hoplimit ip route option and add it to the usage
line and documentation.
- Add the missing reordering ip route option to the usage line.
- Add documentation for initcwnd ip route option.
Tested by setting hoplimit and retreiving it via "show".
Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com>
[ported to HEAD, fixed a bug with hoplimit lock handling, added documentation]
Signed-off-by: Ori Finkelman <ori@comsleep.com>
Signed-off-by: Yony Amit <yony@comsleep.com>
The iptables code supports a "no shared libs" mode where it can be used
without requiring dlfcn related functionality. This adds similar support
to iproute2 so that it can easily be used on systems like nommu Linux (but
obviously with a few limitations -- no dynamic plugins).
Rather than modify every location that uses dlfcn.h, I hooked the dlfcn.h
header with stub functions when shared library support is disabled. Then
symbol lookup is done via a local static lookup table (which is generated
automatically at build time) so that internal symbols can be found.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
It uses 1MB as receive buf limit by default (without
increasing /proc/sys/net/core/rmem_max it will be limited by less
however) and allows to specify the size manually using "-rcvbuf X"
(-r is already used, so you need to specify at least -rc).
Additionally rtnl_listen() continues on ENOBUFS after printing the
error message.
--Boundary-01=_wxi/JRaNdLkbr7g
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline
Hi Stephen,
please review attached patch to add support for in-kernel potential router=
=20
lists for ISATAP tunnels.
Usage:
ip tunnel add name isatap0 mode isatap local 192.168.1.100
ip tunnel prl dev isatap0 prl-default 192.168.1.1
ip tunnel prl dev isatap0 prl-nodefault 192.168.1.2
ip tunnel prl dev isatap0 prl-delete 192.168.1.1
ip tunnel show # pr and pdr will be listed as well
Patch based on http://osprey67.com/seal/iproute2_diff.v0_3.txt by Fred L.=20
Templin.
Thanks,
Sascha
On tor, 2009-04-30 at 14:32 +0100, Timothy Baldwin wrote:
> Package: iproute
> Version: 20090324-1
> Severity: minor
>
>
> $ ip link set eth0 address help
> "help" is invalid lladdr.
> Segmentation fault
>
> Desipte the invalid command line arguments it shouldn't crash.
>
Callers need to check return value from ll_addr_a2n(). Patch below.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
When using iproute2 to display information on policies installed in kernel
(ip x p s) output is incorrect: IPv6 addresses printed as IPv4 addresses.
In case I am dealing with inter protocol policies where the template's address
family differs from those of the policy itself.
The patch attached solves this problem.
Hello Stephen,
thanks für the commit of my last CAN patch.
Today i got a hint, that the help text of 'ip link' can be improved also.
Many thanks!
Oliver
Signed-Off-By: Oliver Hartkopp <oliver@hartkopp.net>
t's not a big problem, but it makes a better show in 'ip link show' on
CAN interfaces :-)
I also moved __PF(CAN,can) in ll_proto.c to the same position where it
can be found in if_ether.h .
The only thing i did not know if the __PF(CAN,can) in ll_types.c needs
to be put in #ifdef ARPHDR_CAN like __PF(HWX25,hwx25) is or not. You
definitely know that better than me.
"ip -6 tunnel show" displays only ip6ip6 tunnels not ip4ip6 tunnels
- it should display all irrespective of proto.
This is because the default tunnel proto is initialized to IPPROTO_IPV6 in ip6_tnl_parm_init() which is fine for a 'add' command but not for 'show'. This patch overrides proto with 0 signifying 'mode any' as the default in case of a 'show'.
please commit my patch below to the iproutes package. It just an incorrect
check so that adding an isatap tunnel with remote works, since it's needed if
one wants to use stateless autoconf. The current check makes tunnel mode
isatap unusable for all client users.
Hello Stephen and netdev people!
Currently you can configure "equalize" and it looks all fine and dandy.
The kernel has the interface defined, but apparently there's never actually
been any implementation for it (only a never merged patch in the 2.4 era).
I'm suggesting to drop the code to give any potential users of this feature
the benefit of receiving a proper error message. I see it unlikely that
this will be implemented in the near future, but if it ever happens
reviving the iproute2 side should be as easy as git revert this patch.
For more details see http://bugs.debian.org/149897
Regards,
Andreas Henriksson
This patch adds prefix lables for "ip monitor all" command to simplfy
understanding of the output.
Signed-off-by: Varun Chandramohan <varunc@linux.vnet.ibm.com>
This patch adds exclusive support to enable monitoring
neighbour table entries in ip command.
Signed-off-by: Varun Chandramohan <varunc@linux.vnet.ibm.com>
patch attached this time..
On Fri, 2008-08-08 at 10:01 -0400, jamal wrote:
> wireless drivers using wext is a prime example if you need a test case.
>
> cheers,
> jamal
ip: Allow for easier debug of buggy devices that dont send their names
With the old message couldnt tell which device had the bug.
This patch provides at least an ifindex to narrow it down.
Theres also no point in bailing out because of one bug; we
allow it to go on so we could dump as much info as we can
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
(router solicitation) becomes negative
How reproducible:
Always.
Steps to Reproduce:
1. Configure an IPv6 router to advertise a prefix with a short preferred
lifetime, e.g. 0.
2. Wait for the IPv6 autoconfiguration process to complete for an interface
<if> connected to a link where that router advertises.
3. Run ip -6 show dev <if>.
Actual results:
The preferred lifetime will have become negative, but it is printed as an
unsigned integer. The preferred lifetime to be displayed will therefore be
close to UINT_MAX.
“ip maddr show” on an infiniband address causes a stack corruption
because the length of the address for Infiniband (20 bytes, as
described in kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4
__u32 to 8 and also adds a check to avoid overriding the available
size while parsing the hardware address.
This bug affects current upstream code AFAICT.
Hope this helps,
Cheers,
Olivier.
“ip maddr show ib0” causes a stack corruption because the length of the address
for Infiniband (20 see kernel doc Documentation/infiniband/ipoib.txt) does not
fit on the 16 bytes of the field in which it gets stored.
The proposed patch increases the size of the hardware address from 4 u32 to 8
and adds a check to avoid overriding the available size while parsing the
hardware address.
Chris Wright
Florian Westphal
Alexandre Cassen
Michele Petrazzo - Unipex
Stephen Hemminger
Wolfgang Grandegger
Jamal Hadi Salim
Williams, Mitch A
laurent chavey
Brian Haley
Andreas Henriksson
Alex Badea
Arnd Bergmann
Patrick McHardy
Simon Horman
Mark Borst
Gilad Ben-Yossef
Mike Frysinger
David Woodhouse
Sascha Hlusiak
Thomas Egerer
Oliver Hartkopp
Srivats P
Sascha Hlusiak
Varun Chandramohan
Petr Jediný
Benedikt Gollatz
Olivier Fourdan