Export all the read-only values that get returned about a bridge port
such as the timers, the ids, designated_port and cost,
topology_change_ack and config_pending. For the bridge ids the
br_dump_bridge_id function is exported from iplink_bridge.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
netns_map_add() does a malloc of (sizeof (struct nsid_cache) +
strlen(name)) and then proceed with strcpy() of name into the
zero-length member at the end of the nsid_cache structure. The
nul-terminator is written outside of the allocated memory and may
overwrite the allocator's internal structure.
This can trigger a segmentation fault on i386 uclibc with names of size 8:
after the corruption occurs, the call to closedir() on netns_map_init()
crashes while freeing the DIR structure.
Here is the relevant valgrind output:
==1251== Memcheck, a memory error detector
==1251== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==1251== Using Valgrind-3.11.0 and LibVEX; rerun with -h for copyright
info
==1251== Command: ./ip netns
==1251==
==1251== Invalid write of size 1
==1251== at 0x4011975: strcpy (in
/usr/lib/valgrind/vgpreload_memcheck-x86-linux.so)
==1251== by 0x8058B00: netns_map_add (ipnetns.c:181)
==1251== by 0x8058E2A: netns_map_init (ipnetns.c:226)
==1251== by 0x8058E79: do_netns (ipnetns.c:776)
==1251== by 0x804D9FF: do_cmd (ip.c:110)
==1251== by 0x804D814: main (ip.c:300)
This patch adds support to add mpls multipath
routes.
example:
ip -f mpls route add 100 \
nexthop as 200 via inet 10.1.1.2 dev swp1 \
nexthop as 700 via inet 10.1.1.6 dev swp2
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
It seems that I've made a mistake when I exported these, instead of a
space in the end I've put a newline character which is wrong and breaks
the single line output.
Fixes: 7d6bc3b87a ("bonding: export 3ad actor and partner port state")
Reported-by: Sam Tannous <stannous@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_NF_CALL_(IP|IP6|ARP)TABLES
attributes in iproute2 so it can change their values.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_STARTUP_QUERY_INTVL
attribute in iproute2 so it can change the startup query interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
attribute in iproute2 so it can change the query response interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERY_INTVL attribute
in iproute2 so it can change the query interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERIER_INTVL
attribute in iproute2 so it can change the querier interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_MEMBERSHIP_INTVL
attribute in iproute2 so it can change the membership interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_LAST_MEMBER_INTVL
attribute in iproute2 so it can change the last member interval.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_STARTUP_QUERY_CNT
attribute in iproute2 so it can change the startup query count.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_LAST_MEMBER_CNT
attribute in iproute2 so it can change the last member count value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_HASH_MAX attribute
in iproute2 so it can change the maximum hashed entries.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_HASH_ELASTICTITY
attribute in iproute2 so it can change the hash elasticity value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERIER attribute
in iproute2 so it can toggle the mcast querier value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_QUERY_USE_IFADDR
attribute in iproute2 so it can toggle the multicast_query_use_ifaddr val.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_SNOOPING attribute
in iproute2 so it can change the multicast snooping value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_ROUTER attribute
in iproute2 so it can change the multicast router value.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_VLAN_DEFAULT_PVID
attribute in iproute2 so it can change the default pvid.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_GROUP_ADDR attribute
in iproute2 so it can change the group address.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_GROUP_FWD_MASK attribute
in iproute2 so it can change the group forwarding mask.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Netlink already provides hello_timer, tcn_timer, topology_change_timer
and gc_timer, so let's make them visible.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This change add the ability to create lwt/flow based/externally
controlled geneve device and to select the udp destination port used
by a full geneve tunnel.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
'ip monitor all' is broken on older kernels.
This patch fixes 'ip monitor all' to match
'all' and not 'all-nsid'.
It moves parsing arg 'all-nsid' to after parsing
'all'.
Before:
$ip monitor all
NETLINK_LISTEN_ALL_NSID: Protocol not available
After:
$ip monitor all
[NEIGH]Deleted 10.0.0.1 dev eth1 lladdr c4:54:44:4f:b2:dd STALE
Fixes: 449b824ad1 ("ipmonitor: allows to monitor in several netns")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
the warning was:
iproute.c:301:12: warning: 'val' may be used uninitialized in this
function [-Wmaybe-uninitialized]
features &= ~RTAX_FEATURE_ECN;
^
iproute.c:575:10: note: 'val' was declared here
__u32 val;
^
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Options 'group' and 'remote' cannot take 'any' as value but 'local' can.
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch replaces exits with returns in iplink
command. Helps to continue on errors when
invoked with ip -force -batch.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
"random" is a new IPv6 addrgenmode, enabling "stable_secret" type
addresses with an auto-generated secret.
$ ip link set eth0 addrgenmode random
$ ip -d link show dev eth0
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:21:86:a3:25:7d brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode random
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
It is possible to switch to another addrgenmode after setting a
valid secret. Allow switching back without reconfiguring the
secret for completeness.
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
I repeatedly failed to get this right, so now I have to clean up my mess
afterwards.
Fixes: 7d6aadcd0a ("ip{,6}tunnel: have a shared stats parser/printer")
Signed-off-by: Phil Sutter <phil@nwl.cc>
This has a slight side-effect of not aborting when /proc/net/dev is
malformed, but OTOH stats are not parsed for uninteresting interfaces.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Currently ip6 encap support for lwtunnel is missing.
This patch implement it, mostly duplicating the ipv4 parts.
Also be sure to insert a space after the encap type, when
showing lwtunnel, to avoid the tunnel type and the following
argument being merged into a single word.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch add support for IFLA_VXLAN_COLLECT_METADATA via the
'external' keyword to the vxlan link.
Also enforce mutual exclusion between 'vni' and 'external'.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently parse_encap_ip() does not update correctly argv/argc;
if multiple lwtunnel arguments are provided, the parsing fails after
the first one, i.e.
ip route add 172.16.101.0/24 dev vxlan1 encap ip id 42 dst 192.168.255.1
fails with:
Error: either "to" is duplicate, or "dst" is a garbage.
This commit addresses the issue, stepping to next argument at each iteration
of the parsing loop.
Fixes: 1e5293056a ("lwtunnel: Add encapsulation support to ip route")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 0f7543322c ("route: ignore RTAX_HOPLIMIT of value -1")
accidentally reordered fprintf statements. This patch restores the
original ordering.
Fixes: 0f7543322c ("route: ignore RTAX_HOPLIMIT of value -1")
Signed-off-by: Phil Sutter <phil@nwl.cc>
This patch:
- Adds a utility function for parsing a 64 bit address
- Adds a utility function for converting a 64 bit address to ASCII
- Adds and ILA encap type in lwt tunnels
Signed-off-by: Tom Herbert <tom@herbertland.com>
Currently, the table id for VRF devices requires an integer. Convert
it to use rtnl_rttable_a2n which handles table names from the iproute2
directory.
This also fixes a bug in the original commit where table name are not
properly handled.
Fixes: 15faa0a30b ("add support for VRF device")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Older kernels use -1 internally as indicator to use the sysctl default,
but they still export the setting. Newer kernels use 0 to indicate that
(which is why the conversion from -1 to 0 was done here), but they also
stopped exporting the value. Since the meaning of -1 is clear, treat it
equally like default on newer kernels (which is to not print anything).
Signed-off-by: Phil Sutter <phil@nwl.cc>
On 24.11.2015 02:26, Stephen Hemminger wrote:
> On Thu, 12 Nov 2015 21:10:08 +0000
> Konstantin Shemyak <konstantin@shemyak.com> wrote:
>
>> When creating an IP tunnel over IPv6, the address family must be passed in
>> the option, e.g.
>>
>> ip -6 tunnel add mode ip6gre local 1::1 remote 2::2
>>
>> This makes it impossible to create both IPv4 and IPv6 tunnels in one batch.
>>
>> In fact the address family option is redundant here, as each tunnel mode is
>> relevant for only one address family.
>> The patch determines whether the applicable address family is AF_INET6
>> instead of the default AF_INET and makes the "-6" option unnecessary for
>> "ip tunnel add".
>>
>> Signed-off-by: Konstantin Shemyak <konstantin@shemyak.com>
>> ---
>> ip/iptunnel.c | 26 ++++++++++++++++++++++++++
>> testsuite/tests/ip/tunnel/add_tunnel.t | 14 ++++++++++++++
>> 2 files changed, 40 insertions(+)
>> create mode 100755 testsuite/tests/ip/tunnel/add_tunnel.t
>>
>> diff --git a/ip/iptunnel.c b/ip/iptunnel.c
>> index 78fa988..7826a37 100644
>> --- a/ip/iptunnel.c
>> +++ b/ip/iptunnel.c
>> @@ -629,8 +629,34 @@ static int do_6rd(int argc, char **argv)
>> return tnl_6rd_ioctl(cmd, medium, &ip6rd);
>> }
>>
>> +static int tunnel_mode_is_ipv6(char *tunnel_mode) {
>> + char *ipv6_modes[] = {
>> + "ipv6/ipv6", "ip6ip6",
>> + "vti6",
>> + "ip/ipv6", "ipv4/ipv6", "ipip6", "ip4ip6",
>> + "ip6gre", "gre/ipv6",
>> + "any/ipv6", "any"
>> + };
>> + int i;
>> +
>> + for (i = 0; i < sizeof(ipv6_modes) / sizeof(char *); i++) {
>> + if (strcmp(ipv6_modes[i], tunnel_mode) == 0)
>> + return 1;
>> + }
>> + return 0;
>> +}
>> +
>
> The ipv6_modes table should be static const.
Thank you for the note! attached the corrected patch.
> Also is it possible to use strstr for ipv6 and ip6 or even strchr(tunnel_mode, '6')
> to simplify this?
There is IPv6 tunnel mode 'any', and IPv4 tunnel mode 'ipv6/ip' (aka
'sit'). It looks to me that attempts to find some substring match
would not make the code much shorter, but definitely less readable.
Konstantin Shemyak.
>From 42d27db0055c3a114fe6eb86d680bef9ec098ad4 Mon Sep 17 00:00:00 2001
From: Konstantin Shemyak <konstantin@shemyak.com>
Date: Thu, 12 Nov 2015 20:52:02 +0200
Subject: [PATCH] Tunnel address family is determined from the tunnel mode
When the tunnel mode already tells the IP address family, "ip tunnel"
command determines it and does not require option "-4"/"-6" to be passed.
This makes possible creating both IPv4 and IPv6 tunnels in one batch.
Signed-off-by: Konstantin Shemyak <konstantin@shemyak.com>
Nikolay Aleksandrov
Nicolas Cavallari
Roopa Prabhu
Paolo Abeni
Zhang Shengju
Thomas Faivre
Stephen Hemminger
Bjørn Mork
Hangbin Liu
Phil Sutter
Hannes Frederic Sowa
Konstantin Khlebnikov
Tom Herbert
Stephen Hemminger
David Ahern
Konstantin Shemyak