First, the default value for 1-k is documented as being 0, but is
currently being set to 1. (100%). This causes all packets to be dropped
in the good state if 1-k is not explicitly specified. Fix this by setting
the default to 0.
Second, the 1-h option is parsed correctly, however, the kernel is
expecting "h", not 1-h. Fix this by inverting the "1-h" percentage before
sending to and after receiving from the kernel. This does change the
behavior, but makes it consistent with the netem documentation and the
literature on the Gilbert-Elliot model, which refer to "1-h" and "1-k,"
not "h" or "k" directly.
Last, fix a minor formatting issue for the options reporting.
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
When limit<burst latency becomes <0, for example:
# tc qdisc add dev eth0 root handle 1: tbf limit 100K burst 256K rate 256kbit
# tc qdisc show
qdisc tbf 1: dev eth0 root refcnt 2 rate 256Kbit burst 256Kb lat 4290.0s
If latency<0 there is no reason to show it. Limit will be printed instead of
latency when latency<0:
# tc qdisc show
qdisc tbf 1: dev eth0 root refcnt 2 rate 256Kbit burst 256Kb limit 100Kb
Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
This also fixes a long standing bug of not sanely reporting the
action chain ordering
Sample scenario test
on window 1(event window):
run "tc monitor" and observe events
on window 2:
sudo tc actions add action drop index 10
sudo tc actions add action ok index 12
sudo tc actions ls action gact
sudo tc actions flush action gact
See the event window reporting two entries
(doing another listing should show empty generic actions)
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
We need limits.h for LONG_MIN and LONG_MAX, sys/param.h for MIN and
sys/select for struct timeval.
This fixes the following compile errors with musl libc:
f_bpf.c: In function 'bpf_parse_opt':
f_bpf.c:181:12: error: 'LONG_MIN' undeclared (first use in this function)
if (h == LONG_MIN || h == LONG_MAX) {
^
...
tc_util.o: In function `print_tcstats2_attr':
tc_util.c:(.text+0x13fe): undefined reference to `MIN'
tc_util.c:(.text+0x1465): undefined reference to `MIN'
tc_util.c:(.text+0x14ce): undefined reference to `MIN'
tc_util.c:(.text+0x154c): undefined reference to `MIN'
tc_util.c:(.text+0x160a): undefined reference to `MIN'
tc_util.o:tc_util.c:(.text+0x174e): more undefined references to `MIN' follow
...
tc_stab.o: In function `print_size_table':
tc_stab.c:(.text+0x40f): undefined reference to `MIN'
...
fdb.c:247:30: error: 'ULONG_MAX' undeclared (first use in this function)
(vni >> 24) || vni == ULONG_MAX)
^
lnstat.h:28:17: error: field 'last_read' has incomplete type
struct timeval last_read; /* last time of read */
^
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
BUG: tc filter show ... produce a segmentation fault if more than one
filter rule with action -j MARK exists.
Reason: In print_ipt(...) xtables will be initialzed with a
pointer to the static struct tcipt_globals at xtables_init_all().
Later on the fields .opts and .options_offset of tcipt_globals are
modified. The call of xtables_free_opts(1) at the end of print(...)
does not restore the original values of tcipt_globals for the
modified fields. It only frees some allocated memory and sets
.opts to NULL. This leads to a segmentation fault when print_ipt()
is called for the next filter rule with action -j MARK.
Fix: Cloneing tcipt_globals on the stack as tmp_tcipt_globals and
use it instead of tcipt_globals, so tcipt_globals will be not
modified.
Signed-off-by: Andreas Greve <andreas.greve@a-greve.de>
The display of the entire netem loss state is shown as if it
were gemodel state, as the loss state information is assigned to the
wrong pointer. Correct this by assigning the loss state to the correct
pointer.
Additionally, attempting to set netem loss state will result in
random values in the p14 state probability because the option value
passed to the kernel by tc netem is not parsed or initialized. Fix this
by supplying a default value of 0 for p14 and parsing the p14 value if
one is supplied.
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
The direct_qlen command option is used with qdisc operation.
It happened to be implemented in htb_parse_class_opt() which is called
with class operation.
Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
netem support 64bit rates start from linux-3.13.
Add 64bit rates support in tc tools.
tc qdisc show dev eth0
qdisc netem 1: dev eth4 root refcnt 2 limit 1000 rate 35Gbit
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Eric Dumazet <edumazet@google.com>
To avoid loss when transforming burst to buffer in userspace, send
burst/mtu to kernel directly.
Kernel commit 2e04ad424b("sch_tbf: add TBF_BURST/TBF_PBURST attribute")
make it can handle burst/mtu.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Proportional Integral controller Enhanced (PIE) is a scheduler to address the
bufferbloat problem.
We present here a lightweight design, PIE(Proportional Integral controller
Enhanced) that can effectively control the average queueing latency to a target
value. Simulation results, theoretical analysis and Linux testbed results have
shown that PIE can ensure low latency and achieve high link utilization under
various congestion situations. The design does not require per-packet
timestamp, so it incurs very small overhead and is simple enough to implement
in both hardware and software. "
For more information, please see technical paper about PIE in the IEEE
Conference on High Performance Switching and Routing 2013. A copy of the paper
can be found at ftp://ftpeng.cisco.com/pie/.
Please also refer to the IETF draft submission at
http://tools.ietf.org/html/draft-pan-tsvwg-pie-00
All relevant code, documents and test scripts and results can be found at
ftp://ftpeng.cisco.com/pie/.
For problems with the iproute2/tc or Linux kernel code, please contact Vijay
Subramanian (vijaynsu@cisco.com or subramanian.vijay@gmail.com) Mythili Prabhu
(mysuryan@cisco.com)
Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Mythili Prabhu <mysuryan@cisco.com>
CC: Dave Taht <dave.taht@bufferbloat.net>
attached.
cheers,
jamal
commit 58d78f9f6447df324cdeb99262442c5e3f1f924b
Author: Jamal Hadi Salim <jhs@mojatatu.com>
Date: Sun Dec 22 10:34:18 2013 -0500
dont skip displaying of action chains or lists by TCA_ACT_MAX_PRIO
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
attached.
cheers,
jamal
commit d7869e6167c3553e93e254940b0647032b40fed8
Author: Jamal Hadi Salim <jhs@mojatatu.com>
Date: Sun Dec 22 07:46:28 2013 -0500
print new line at the end for aesthetics
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
attached.
cheers,
jamal
commit b82057d9ec851a8aba8a295b959190ef5098f330
Author: Jamal Hadi Salim <jhs@mojatatu.com>
Date: Sat Dec 21 17:00:11 2013 -0500
After a decade of trying to deprecate the old policer syntax,
I believe it is time to kill it. The kernel build option for old
policer is gone for at least 5 years now (although backward
compatibility is still there). Being backward compatible meant
hijacking the keyword "action" and was obstructing policies like:
tc filter add dev eth0 parent ffff: protocol ip pref 10 \
u32 match ip protocol 1 0xff flowid 1:10 \
action skbedit mark 1 \
action police rate 10kbit burst 10k pipe \
action skbedit mark 2 \
action police rate 20kbit burst 20k pipe \
action action mirred egress mirror dev dummy0
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Display more user friendly rates.
10Mbit is more readable than 10000Kbit
Before :
class htb 1:2 root prio 0 rate 10000Kbit ceil 10000Kbit ...
After:
class htb 1:2 root prio 0 rate 10Mbit ceil 10Mbit ...
Signed-off-by: Eric Dumazet <edumazet@google.com>
tbf support 64bit rates start from linux-3.13.
Add 64bit rates support in tc tools.
tc qdisc show dev eth0
qdisc tbf 1: root refcnt 2 rate 40000Mbit burst 230000b peakrate 50000Mbit minburst 87500b lat 50.0ms
This is a followup to ("htb: support 64bit rates").
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Eric Dumazet <edumazet@google.com>
This is the iproute2 part of the kernel patch "net: sched:
add BPF-based traffic classifier".
[Will re-submit later again for iproute2 when window for
-next submissions opens.]
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>
There are two global variables in tc/tc_class.c:
__u32 filter_qdisc;
__u32 filter_classid;
These are not re-initialized for each line received in -batch mode:
class show dev eth0 parent 1: classid 1:1
class show dev eth0 parent 1: classid 1:1
Error: duplicate "classid": "1:1" is the second value.
This patch fixes the issue by initializing the two globals when we
enter print_class().
Signed-off-by: Nigel Kukard <nkukard@lbsd.net>
Some qdisc like htb want the parse_qopt to be called even if no options
present. Fixes regression caused by:
e9e78b0db0 is the first bad commit
commit e9e78b0db0
Author: Stephen Hemminger <stephen@networkplumber.org>
Date: Mon Aug 26 08:41:19 2013 -0700
tc: allow qdisc without options
If you taketh you giveth.
I Went the LinuxWay and copied this for m_simple.c and noticed
this one typo (I wonder where it came from?;->).
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Simple action is already in the kernel for years now as an
example. This complements it with user space control.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
TCA_HTB_DIRECT_QLEN attribute is supported since linux-3.10
HTB classes use an internal pfifo queue, which limit was not reported
by tc, and value inherited from device tx_queue_len at setup time.
With this patch, tc displays the value and can change it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Since linux-3.11, rate estimator can provide TCA_STATS_RATE_EST64
when rate (bytes per second) is above 2^32 (~34 Mbits)
Change tc to use this attribute for high rates.
Signed-off-by: Eric Dumazet <edumazet@google.com>
This iproute2 tc patch is connected to the kernel
- commit 8a8e3d84b17 (net_sched: restore "linklayer atm" handling)
The rate table calculated by tc, have gotten replaced in the kernel
and is no-longer used for lookups.
This happened in kernel release v3.8 caused by kernel
- commit 56b765b79 ("htb: improved accuracy at high rates").
This change unfortunately caused breakage of tc overhead and
linklayer parameters.
Kernel overhead handling got fixed in kernel v3.10 by
- commit 01cb71d2d47 (net_sched: restore "overhead xxx" handling)
Kernel linklayer handling got fixed in kernel v3.11 by
- commit 8a8e3d84b17 (net_sched: restore "linklayer atm" handling)
The linklayer fix introduced a struct change, that allow the linklayer
attribute to be transferred between tc and kernel. This patch make use
of this linklayer attribute.
The linklayer setting is transfer to the kernel. And linklayer
setting received from the kernel is printed with a prefixed
"linklayer" when listing current configuration. The default
TC_LINKLAYER_ETHERNET is only printed in detailed output mode.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
On Mon, 2013-06-03 at 16:36 +0100, Ben Hutchings wrote:
> Oops, I read this as being strtol() currently, not strtod(). Currently
> '1.5gbit' will work, but this change will break that. So I think you
> need to keep bps as a double.
Arg
> Then here I think the check should be *rate != floor(bps), i.e. accept
> rounding down of a non-integer number of bytes but any other change is
> assumed to be overflow.
Thanks Ben, here is v4 then ;)
[PATCH v4] get_rate: detect 32bit overflows
Current rate limit is 34.359.738.360 bit per second, and
unfortunately 40Gbps links are above it.
overflows in get_rate() are currently not detected, and some
users are confused. Let's detect this and complain.
Note that some qdisc are ready to get extended range, but this will
need additional attributes and new iproute2
With help from Ben Hutchings
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
"tc class show dev ..." omits the overhead attribute for HTB.
After patch I have :
tc class add dev $DEV parent 1: classid 1:1 est 1sec 4sec htb \
rate 12Mbit mtu 1500 quantum 1514 overhead 20
tc class show dev $DEV
class htb 1:1 root prio 0 rate 12000Kbit overhead 20 ceil 12000Kbit
burst 1500b cburst 1500b
Signed-off-by: Eric Dumazet <edumazet@google.com>
In trying to build on a RHEL6.3 I ran into several build issues that are
addressed in this patch.
The first is that xtables_merge_options only has 3 parameters. It appears
this is how this code was originally. As such for the case where the version
is less than 6 I am assuming it would be correct to maintain the original
setup that only had 3 parameters being passed instead of 4.
I also ran into an issue with the define for __ALIGN_KERNEL not being present.
I believe this may be due to the fact that __ALIGN_KERNEL was moved into a
separate header from ALIGN after the UAPI changes. In order to just cover all
of the bases I have moved the main definition for the macros into
__ALIGN_KERNEL_MASK and __ALIGN_KERNEL and if ALIGN is also needed then it is
just a direct redefine to __ALIGN_KERNEL.
Cc: Hasan Chowdhury <shemonc@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Clearer error messages for fifo and tbf qdiscs:
- Say who is complaining
- Don't just say a parameter is bad, show the offending parameter
- Be clearer about duplicate parameters vs illegal pairs of parameters
- Try to give multiple error messages rather than let the user discover the errors one by one
- When there are parameter aliases, try to use the variant that was used, or at least mention them all
Note that in the old version an empty parameter list to tbf would just cause an explain() message
without a specific error message. By simply removing the relevant error check, the code now
handles this error more gracefully by printing an error message for all mandatory parameters.
It still prints the explain() message.
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
On openSUSE 12.2 (at least) xtables.h is not installed in the system-wide
include dir but in /usr/include/iptables-1.4.16.3/. This results in the
following build failure:
em_ipset.c:26:21: fatal error: xtables.h: No such file or directory
Other includers of xtables.h already call out to pkg-config
Fixes breakage with xtables API starting with version 1.4.10
Signed-off-by: Hasan Chowdhury <shemonc@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Jay Vosburgh
Yang Yingliang
Sergey V. Lobanov
Jamal Hadi Salim
Natanael Copa
Andreas Greve
Terry Lam
Hiroaki SHIMODA
WANG Cong
Vijay Subramanian
Stephen Hemminger
Eric Dumazet
Daniel Borkmann
Nigel Kukard
Jesper Dangaard Brouer
Eric Dumazet
Alexander Duyck
Kees van Reeuwijk
Benjamin Poirier
Johannes Naab