Add support for bonding attributes just added to net-next.
On set, allow string or number value for enumerated attributes.
On show, use always use string value for attribute.
Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com>
The vti interface will use GRE_KEY to match the right policy in kernel. So we
can not return fail when the tunnel is vti.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
The RTM_NEWLINK message accepts ifi_index non-zero value and lets
creation of links with given index (if it's free, or course). This
functionality is available since linux-v3.5.
This patch makes this API available via ip tool.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Currently ip-link(8) parses, but ignores "group" argument to
peer interface on veth creation.
Insert IFLA_GROUP attribute for peer interface when present.
Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru>
Based on patch by Sergey Popovich <popovich_sergei@mail.ru>
This fixes crash when ip-link(8) invoced with command:
ip link add dev veth1a type veth peer
Use warn_unused_result to enforce checking return value of rtnl_send,
and fix where the errors are.
Suggested by initial patch from Petr Písař <ppisar@redhat.com>
As a system admin I occasionally want to be able to check that all
interfaces has a name in DNS or /etc/hosts file.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
As both linux kernel and function ipaddrlabel_modify use unsigned int for
label. We should also use unsigned int value when print addrlabel in case of
misunderstanding.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
The kernel already supports it, so add the support
to iproute2 as well.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
ip xfrm considers that the user-defined mark is "any" as soon as
(mark.v & mark.m == 0), which prevents from specifying non-wildcard
marks that include the value 0 (typically 0/0xffffffff).
Yet, matching exactly mark 0 is useful for instance to separate
vti policies from global policies.
Always configure the user mark if mark.m != 0.
Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com>
This bug is reported from below link:
https://bugzilla.redhat.com/show_bug.cgi?id=982761
An simplified command from its original reproducing method in bugzilla:
ip xfrm state add src 10.0.0.2 dst 10.0.0.1 proto ah spi 0x12345678 auth md5 12
will cause below spew from gcc.
Reported-by: Sohny Thomas <sthomas@linux.vnet.ibm.com>
Since commit a05f6511f5, ip batch mode is broken when using 'netns exec' cmd.
When WIFEXITED() returns true, it means that the child exited normally, hence
we must not call exit() but just returns the status. If we call exit, the next
commands in the file file are not executed.
If WIFEXITED() returns false, we can call exit() because it means that the
child failed.
This patch partially reverts commit a05f6511f5.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The git-commit dc8867d0, that added support for displaying the
extra-flags of a state, introduced a potential segfault.
Trying to show a state without the extra-flag attribute and show_stats
enabled, would cause the NULL pointer in tb[XFRMA_SA_EXTRA_FLAGS] to be
dereferenced.
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
The mode information is contained in IFLA_MACVLAN_MODE instead
of IFLA_VLAN_ID (both evaluating to "1" in their enums).
Signed-off-by: Lutz Jaenicke <ljaenicke@innominate.com>
Prefix labelling is currently only activated when monitoring "all"
objects. However, the output can still be confusing when monitoring
more than 1 object, so add an option to always print prefix labels.
Signed-off-by: Martin Schwenke <martin@meltin.net>
When configuring a system with multiple network uplinks and default routes, it
is often convenient to reference a routing table multiple times - but reject
its routing decision if certain constraints are not met by it.
Consider this setup:
$ ip route add table secuplink default via 10.42.23.1
$ ip rule add pref 100 table main suppress_prefixlength 0
$ ip rule add pref 150 fwmark 0xA table secuplink
With this setup, packets marked 0xA will be processed by the additional routing
table "secuplink", but only if no suitable route in the main routing table can
be found. By suppressing entries with a prefixlength of 0 (or less), the
default route (/0) of the table "main" is hidden to packets processed by rule
100; packets traveling to destinations via more specific routes are processed
as usual.
It is also possible to suppress a routing entry if a device belonging to
a specific interface group is to be used:
$ ip rule add pref 150 table main suppress_group 1
Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
This change adds the interface group to the output of "ip link show".
It also makes "ip link" print _all_ devices if no group filter is specified;
previously, only interfaces of the default group (0) were shown.
Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
This patch allows setting VXLAN destination to unicast address.
It allows that VXLAN can be used as peer-to-peer tunnel without
multicast.
v6: change back to the v3 except for using new attribute because
replacing command-line parameters breaks existing scripts,
based by Cong Wang's comments.
v5: rebase on the latest.
v4: replace "group" with "remote" based by David Stevens's comments.
v3: move a new attribute REMOTE into the last of an enum list
based by Stephen Hemminger's comments.
fix the usage to show explicitly that both "remote" and "group"
cannot be specified, based by Ben Hutchings's comments.
v2: use a new argument "remote" instead of "group" based by
Stephen Hemminger's comments.
Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp>
The netns code was using EXIT_SUCCESS/EXIT_FAILURE but the rest of the ip
code used -1 explictly, so change to follow convention. Also, certain types
of errors like fork failure should abort a batch operation, rather than just
returning an error.
execvp() does not return when the command succeed, hence all commands in the
batch file after the line 'ip netns exec' are not executed.
Let's fork before calling execvp() if batch mode is used..
Example:
$ cat test.batch
netns add netns1
netns exec netns1 ip l
netns
$ ip -b test.batch
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: sit0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT
link/sit 0.0.0.0 brd 0.0.0.0
All command after 'netns exec' are never executed.
With the patch:
$ ip -b test.batch
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: sit0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT
link/sit 0.0.0.0 brd 0.0.0.0
netns1
Now, existing netns are displayed.
Signed-off-by: JunweiZhang <junwei.zhang@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Without patch, I got:
# ./ip/ip tunnel show
ip_vti0: ioctl 89f4 failed: Invalid argument
ip_vti0: ip/ip remote any local any ttl inherit nopmtudisc key 0
this is due to VTI_ISVTI has the same numeric value with SIT_ISATAP,
but only sit tunnel has SIOCGETPRL, therefore it should check for SIT
tunnel first.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <amwang@redhat.com>
This patch adds quickack option to enable/disable TCP quick ack
mode for per-route.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>
This patch adds multi_queue option to ip tuntap.
This allows IFF_MULTI_QUEUE flag to be specified during
tun/tap device creation enabling multi-queue support in tun/tap
device.
Example: ip tuntap add dev tap0 mode tap multi_queue
Signed-off-by: Sriram Narasimhan <sriram.narasimhan@hp.com>
This is now possible, because the dump function has been added in kernel.
Note that IPv4 and IPv6 entries are displayed.
Before this patch, only all entries were displayed.
Example:
$ ip netconf
ipv4 dev lo forwarding on rp_filter off mc_forwarding 0
ipv4 dev eth0 forwarding on rp_filter off mc_forwarding 1
ipv4 all forwarding on rp_filter off mc_forwarding 1
ipv4 default forwarding on rp_filter off mc_forwarding 0
ipv6 dev lo forwarding on mc_forwarding 0
ipv6 dev eth0 forwarding on mc_forwarding 0
ipv6 all forwarding on mc_forwarding 0
ipv6 default forwarding on mc_forwarding 0
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For the display part, we print extra-flags only if show_stats is set, like for
standard flags.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This change shifts burden onto the users to choose the UDP port value.
Kernel default value is incorrect UDP port 5287 but now there is
an official assigned port for VXLAN.
The kernel can't change because of legacy compatibility
but new deployments should not use the legacy port value.
Add ability to set UDP destination port on a per device basis.
If no port is assigned, the default IANA assigned port will be used.
If you want the kernel default value, then use port 0.
Source port range option is now called 'srcport', to avoid
confusion. The old option syntax is accepted for compatiablity.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for tokenized IIDs, that enable
administrators to assign well-known host-part addresses
to nodes whilst still obtaining global network prefix
from Router Advertisements. This is the iproute2 part for
the kernel patch f53adae4eae5 (``net: ipv6: add tokenized
interface identifier support'').
Example commands with iproute2:
Setting a device token:
# ip token set ::1a:2b:3c:4d/64 dev eth1
Getting a device token:
# ip token get dev eth1
token ::1a:2b:3c:4d dev eth1
Listing all tokens:
# ip token list (or: ip token)
token :: dev eth0
token ::1a:2b:3c:4d dev eth1
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Change ALGO-KEY to ALGO-KEYMAT to make it more obvious that the
keying material might need to contain more than just the key (such
as a salt or nonce value).
List the algorithm names that currently exist in the kernel.
Indicate that for IPComp, the Compression Parameter Index (CPI) is
used as the SPI.
Group the list of mode values by transform protocol.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Ensure that only algorithms and modes supported by the transform
protocol are specified (so that errors are more obvious).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
AEAD algorithms perform both encryption and authentication; they are
not combined with separate encryption or authentication algorithms.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
A Security Policy Index (SPI) is not used with Mobile IPv6. IPComp
uses a smaller 16-bit Compression Parameter Index (CPI) which is
passed as the SPI value. Perform checks whenever specifying an ID.
Signed-off-by: David Ward <david.ward@ll.mit.edu>
When unmanaged L2TP sessions are created using "ip l2tp add session",
there is no option to allow the session's Layer2SpecificHeader type to
be selected - the kernel's default setting is always used. For
interopability with some vendor equipment, it might be necessary to
use a different setting. So add a new l2spec_type parameter to the "ip
l2tp add session" parameter list, allowing operators to set a specific
Layer2SpecificHeader type. The kernel already exposes the setting as a
netlink attribute so it is straightforward to add support for it in
iproute2.
This change allows unmanaged L2TP sessions to be configured between
Linux and some Cisco equipment by specifying "l2spec_type none" in "ip
l2tp add session" command parameters.
Signed-off-by: James Chapman <jchapman@katalix.com>
My previous commit introduced a patch to allow for states with different
ip address families for selector and id. The must have somehow been a
mixup of the patch I tested and the one I send, so the patch sent breaks
the iproute2 build. This patch fixes this. My apologies.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Do not enforce the selector of a state to have the same address family
as the id. This makes it possible to configure inter family states.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>
Both ip-link and ip-address support the 'up' argument, however this
isn't documented in neither their help outputs or ip-address' manpage.
This patch fixes that.
Signed-off-by: Petr Šabata <contyk@redhat.com>
Reported-by: Jiří Popelka <jpopelka@redhat.com>
While looking into a sysctl regression in decnet on old kernels I
discovered this omission in the iproute2 documentation.
I can't imagine anyone's muscle memory remembering the longer forms.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Some platforms like ppc64 have unsigned long long as 128 bits, and
the printf format string would cause errors. Resolve this by using
unsigned long long where necessary (or unsigned long).
Fixes Debian bug #700434
Need to table id in filter to be unsigned to avoid conversion to -1
The documentation for "ip" suggests that, when using multiple routing tables, the table ID can be an arbitrary 32 bit number. I've been writing a script that calculates a table Id based on an IP addresses and sets up tables accordingly based on it. This seems to work for everything I've tried except "ip route flush". If you specify a table to flush with an ID over 2^31, it flushes all IPv4 routing tables. For example:
Will delete all routing tables, including the default one. Needless to say, this is quite annoying. I think this is an upstream bug, but your opinions will be greatly appreciated.
This patch improves many error messages as follows:
- For incorrect parameters, show the value of the offending parameter, rather than just say that it is incorrect
- Rephrased messages for clarity
- Rephrased to more `mainstream' english
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
Since do_help() has to return an int to fit in the table of commands,
it should actually return an int. This patch lets it do so.
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
This is useful to know the 'real' status of an interface (the flag IFF_PROMISC
is exported by the kernel only when the user set it explicitly, for example it
will not be exported when a tcpdump is running).
This information will be displayed when '-details' is provided by the user.
Example:
$ ip -d l l tun10
6: tun10: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN mode DEFAULT
link/sit 10.16.0.249 peer 10.16.0.121
sit remote 10.16.0.121 local 10.16.0.249 ttl inherit pmtudisc 6rd-prefix 2002::/16
promiscuity 2
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The 'inherit/STRING' or 'inherit/00..ff' syntax indicates that the
TOS field of tunneled packets should be copied from the original IP
header, but for non-IP packets the value STRING or 00..ff should be
used instead. (This syntax is already used by 'ip tunnel show'.)
Also clarify the man page and the command usage text (particularly
that the TOS is not specified as a decimal number).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Add command that go between network namespace names and process
identifiers. The code builds and runs agains older kernels but
only works on Linux 3.8+ kernels where I have fixed stat to work
properly.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Sometimes "ip netns delete" fails because it can not delete the file a
network namespace was mounted on. If this only happened when a
network namespace was really in use this would be fine, but today it
is possible to pin all network namespaces by simply having a long
running process started with "ip netns exec".
Every mount is copied when a network namespace is created so it is
impossible to prevent the mounts from getting into other mount
namespaces. Modify all mounts in the files and subdirectories of
/var/run/netns to be shared mount points so that unmount events can
propogate, making it unlikely that "ip netns delete" will fail because
a directory is mounted in another mount namespace.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Ben Hutchings pointed out that the return value of do_netns is passed
to exit and the current convention of returning -1 for failure is
inconsitent with that reality.
Return EXIT_FAILURE instead of -1 and EXIT_SUCCESS instead of 0. To make
it clear that the return codes are expected to be passed to exit.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Some systems are now following the advice in
linux/Documentation/sharedsubtrees.txt and running with all mount
points shared between all mount namespaces by default.
After creating the mount namespace call mount on / with
MS_SLAVE|MS_REC to modify all mounts in the new mount namespace to
slave mounts if they are shared or private mounts otherwise.
Guarnateeing that changes to the mount namespace created with
"ip netns exec" don't propgate to other namespaces.
Reported-by: Petr Šabata <contyk@redhat.com>
Tested-by: Petr Šabata <contyk@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Clang doesn't support the gcc extension for embeddeding flexible arrays
inside of structures. Use the slightly more portable alloca().
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
mroute was using /proc/net/ip_mr_[vif|cache] to display mroute entries. Hence,
only RT_TABLE_DEFAULT was displayed and only IPv4.
With rtnetlink, it is possible to display all tables for IPv4 and IPv6. The output
format is kept. Also, like before the patch, statistics are displayed when user specify
the '-s' argument.
The patch also adds the support of 'ip monitor mroute', which is now possible.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch adds a new flag to iproute2 for vxlan devices to enable
DOVE features. It also adds support for L2 and L3 switch lookup miss
netlink messages to "ip monitor".
Changes since v2: fix merge conflict
Changes since v1:
- split "dove" flag into separate feature flags:
- "proxy" for ARP reduction
- "rsc" for route short circuiting
- "l2miss" for L2 switch miss notifications
- "l3miss" for L3 switch miss notifications
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
This patch allows to manage ip tunnels via the interface ip link.
The syntax for parameters is the same that 'ip tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch allows to manage ip6 tunnels via the interface ip link.
The syntax for parameters is the same that 'ip -6 tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Thomas Haller
Jiri Pirko
Stephen Hemminger
sfeldma@cumulusnetworks.com
Hangbin Liu
Pavel Emelyanov
Arvid Brodin
Sergey Popovich
Sami Kerola
WANG Cong
Nicolas Dichtel
Christophe Gouault
xeb@mail.ru
Fan Du
Thomas Egerer
Lutz Jaenicke
Richard Godbee
Martin Schwenke
Stefan Tomanek
Atzm Watanabe
JunweiZhang
Amerigo Wang
Adam Borowski
Patric McHardy
Rony Efraim
Andrey Vagin
Sriram Narasimhan
Daniel Borkmann
David Ward
James Chapman
Thomas Egerer
Petr Šabata
roopa
Eric W. Biederman
Kees van Reeuwijk
Mike Frysinger
Strake
Zhi Yong Wu
David L Stevens