This adds configuration for the IFLA_BRPORT_MCAST_TO_UCAST flag that
allows multicast packets to be replicated as unicast packets.
Signed-off-by: Tobias Jungel <tobias.jungel@bisdn.de>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The ip -j option to print output as JSON is ignored when using 'route get':
$ ip -j route get 127.0.0.1
local 127.0.0.1 dev lo src 127.0.0.1 uid 1000
cache <local>
Enable JSON output in iproute_get(), and don't let print_cache_flags() close
the JSON output, as it's not always the last called JSON function.
Tested on different route types:
$ ip -j -p route get 127.0.0.1
[ {
"type": "local",
"dst": "127.0.0.1",
"dev": "lo",
"prefsrc": "127.0.0.1",
"flags": [ ],
"uid": 1000,
"cache": [ "local" ]
} ]
$ ip -d -j -p route get 192.0.2.1
[ {
"type": "unicast",
"dst": "192.0.2.1",
"gateway": "192.168.85.1",
"dev": "wlp3s0",
"table": "main",
"prefsrc": "192.168.85.2",
"flags": [ ],
"uid": 1000,
"cache": [ ]
} ]
Fixes: 663c3cb231 ("iproute: implement JSON and color output")
Acked-by: Phil Sutter <phil@nwl.cc>
Reviewed-and-tested-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add json support for bridge's xstats output.
The plain text output format should remain the same.
Note that this patch pulls the interface out of the attribute
loop, this was an oversight when the set was upstreamed. This does not
change the output format, but fixes it when new xstats attributes show
up.
Example:
$ ip -p -j link xstats type bridge
[ {
"ifname": "br0",
"multicast": {
"igmp_queries": {
"rx_v1": 0,
"rx_v2": 32,
"rx_v3": 0,
"tx_v1": 0,
"tx_v2": 0,
"tx_v3": 0
},
"igmp_reports": {
"rx_v1": 0,
"rx_v2": 32,
"rx_v3": 0,
"tx_v1": 0,
"tx_v2": 0,
"tx_v3": 0
},
"igmp_leaves": {
"rx": 0,
"tx": 0
},
"igmp_parse_errors": 0,
"mld_queries": {
"rx_v1": 33,
"rx_v2": 0,
"tx_v1": 0,
"tx_v2": 0
},
"mld_reports": {
"rx_v1": 66,
"rx_v2": 2,
"tx_v1": 0,
"tx_v2": 0
},
"mld_leaves": {
"rx": 0,
"tx": 0
},
"mld_parse_errors": 0
}
} ]
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This adds only initial object support if json argument is specified.
Later patches convert the current xstats users to json.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
was displayed as
10: from all iif eth1 [detached] goto 10000unresolved proto mrt
now:
10: from all iif eth1 [detached] goto 10000 [unresolved] proto mrt
Fixes: 0dd4ccc56c ("iprule: add json support")
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
IFLA_VF_MAX is larger than the highest valid index in vf array.
Fixes: a1b99717c7 ("Add displaying VF traffic statistics")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The key should not be called "to_tbl" because it is exactly
not a FR_ACT_TO_TBL action. Change it to "action".
# ip rule add blackhole
# ip -j rule | python -m json.tool
...
{
"priority": 0,
"src": "all",
"to_tbl": "blackhole"
},
This is an API break of JSON output as it was added in v4.17.0.
Still change it as the API is relatively new and unstable.
Fixes: 0dd4ccc56c ("iprule: add json support")
Signed-off-by: Thomas Haller <thaller@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
A /0 subnet mask is theoretically valid, but ip route get doesn't allow
it:
$ ip route get 1.0.0.0/0
need at least a destination address
Change the check and remember whether we found an address or not, since
according to the documentation it's a mandatory parameter.
$ ip/ip route get 1.0.0.0/0
1.0.0.0 via 192.168.1.1 dev eth0 src 192.168.1.91 uid 1000
cache
Reported-by: Clément Hertling <wxcafe@wxcafe.net>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When attaching an eBPF program to a device, ip link can force the XDP mode
by using the xdp{generic,drv,offload} keyword instead of just 'xdp'.
Document this behaviour also in the help output.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Fixes: 14683814 ("bpf: add xdpdrv for requesting XDP driver mode")
Fixes: 1b5e8094 ("bpf: allow requesting XDP HW offload")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
in this way, a useless cast to unsigned int is avoided in bpf_print_ops()
and print_tunnel().
Tested with:
# ./tdc.py -c bpf
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Cc: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
ip tracks namespaces with dummy files in /var/run/netns/, but can't see
namespaces created with other tools.
Creating the dummy file and bind mounting the correct procfs entry will
make ip aware of that namespace.
Add an ip netns subcommand to automate this task.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: Andrea Claudi <aclaudi@redhat.com>
Tested-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
ip l add dev tun type gretap external
ip r a 10.0.0.1 encap ip dst 192.168.152.171 id 1000 dev gretap
For gretap example when the command set the id but don't set the
TUNNEL_KEY flags. There is no key field in the send packet
User can set flags with key, csum, seq
ip r a 10.0.0.1 encap ip dst 192.168.152.171 id 1000 key csum dev gretap
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Kernel ignores the RTM_F_LOOKUP_TABLE flag for all families
but IPv4. Don't set it, otherwise it may fall foul of
strict checking policies.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
ip xfrm state show currently dumps keys unconditionally. This limits its
use in logging, as security information can be leaked.
This patch adds a nokeys option to ip xfrm ( state show | monitor ), which
prevents the printing of keys. This allows ip xfrm state show to be used
in logging without exposing keys.
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
In case a neighbour message is of family AF_BRIDE the NDA_DST attribute
was not printed so far. With this patch the family is evaluated to pass
the correct family to format_host_rta.
Signed-off-by: Tobias Jungel <tobias.jungel@bisdn.de>
Add ipneigh_dump_filter to add filter attributes to the neighbor
dump request and update do_show_or_flush to use rtnl_neighdump_req.
Signed-off-by: David Ahern <dsahern@gmail.com>
ip rule add from all iif gretap tun_id 2000 lookup 200
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
iproute2 has been updated for the new strict policy in the kernel. Add a
helper to call setsockopt to enable the feature. Add a call to ip.c and
bridge.c
The setsockopt fails on older kernels and the error can be safely ignored
- any new fields or attributes are ignored by the older kernel.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a filter function to rtnl_addrdump_req to set device index in the
address dump request if the user is filtering addresses by device. In
addition, add a new ipaddr_link_get to do a single RTM_GETLINK request
instead of a device dump yet still store the data in the linfo list.
Signed-off-by: David Ahern <dsahern@gmail.com>
Split ip_linkaddr_list into one function that generates a list of devices
and a second that generates the list of addresses.
Signed-off-by: David Ahern <dsahern@gmail.com>
Similar to 'ip route' add the table id to the dump request for
kernel side filtering if it is supported.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add protocol, table id and device to dump request if set in filter. If
kernel side filtering is supported it is used to reduce the amount of
data sent to userspace.
Older kernels do not parse attributes on a route dump request, so these
are silently ignored and ip will do the filtering in userspace.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a filter option to rtnl_routedump_req and use it to set rtm_flags
removing the need for rtnl_rtcache_request for dump requests.
Signed-off-by: David Ahern <dsahern@gmail.com>
DECnet belongs in the history museum of dead protocols along
with Appletalk and IPX.
Linux support has outlived its natural life and the time has
come to remove it from iproute2. Dead code is a source
of bugs and exploits.
If anyone actually has DECnet running on some old distribution
they can just keep to the old version of iproute2.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
The argument to print_0xhex is converted to unsigned long long
so the format string give for normal printout has to be some
variant of %llx. Otherwise, bogus values will be printed on
32 bit platforms.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
On some 32 bit platforms, the printf was causing warning:
ipmacsec.c: In function ‘getattr_u64’:
ipmacsec.c:655:47: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘unsigned int’ [-Wformat=]
fprintf(stderr, "invalid attribute length %lu\n",
Resolve by computing length as size_t first.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Previously the CAN state was always printed in human-readable txt format,
resulting in invalid JSON.
Signed-off-by: Martin Jeřábek <martin.jerabek01@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_cookie() invocations miss %s format specifier.
While at it, align printout to the previous lines.
Fixes: 98453b6580 ("ip/l2tp: add JSON support")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
IPX has been depracted then removed from upstream kernels.
Drop support from ip route as well.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Don't confuse the user, nsid is a signed integer, this kind of command
should return an error: 'ip netns set foo 0xffffffff'.
Also, a valid value is a positive value. To let the kernel chooses a value,
the keyword 'auto' must be used.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When disabling a flag, one needs to AND with the inverse not the flag
itself. Otherwise specifying for instance 'home -nodad' will effectively
clear the flags variable.
While being at it, simplify the code a bit by merging common parts of
negated and non-negated case branches. Also allow for the "special
cases" to be inverted, too.
Fixes: f73ac674d0 ("ip: change flag names to an array")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When parsing nexthop parameters, a buffer of 4k bytes is provided. Yet,
in lwt_parse_encap() and some functions called by it, buffer size was
assumed to be 1k despite the actual size was provided. This led to
spurious buffer size errors if the buffer was filled by previous nexthop
parameters to exceed that 1k boundary.
Fixes: 1e5293056a ("lwtunnel: Add encapsulation support to ip route")
Fixes: 5866bddd9a ("ila: Add support for ILA lwtunnels")
Fixes: ed67f83806 ("ila: Support for checksum neutral translation")
Fixes: 86905c8f05 ("ila: support for configuring identifier and hook types")
Fixes: b15f440e78 ("lwt: BPF support for LWT")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow to set the DF bit behaviour for outgoing IPv4 packets: it can be
always on, inherited from the inner header, or, by default, always off,
which is the current behaviour.
v2:
- Indicate in the man page what DF refers to, using RFC 791 wording
(David Ahern)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow to set the DF bit behaviour for outgoing IPv4 packets: it can be
always on, inherited from the inner header, or, by default, always off,
which is the current behaviour.
v2:
- Indicate in the man page what DF refers to, using RFC 791 wording
(David Ahern)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This is simpler and cleaner, and avoids having to include the header
from every file where the functions are used. The prototypes of the
internal implementation are in this header, so utils.h will have to be
included anyway for those.
Fixes: 508f3c231e ("Use libbsd for strlcpy if available")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow ip rule dumps and flushes to filter based on ipproto, sport
and dport. Example:
$ ip ru ls ipproto udp
99: from all to 8.8.8.8 ipproto udp dport 53 lookup 1001
$ ip ru ls dport 53
99: from all to 8.8.8.8 ipproto udp dport 53 lookup 1001
Signed-off-by: David Ahern <dsahern@gmail.com>
'ip rule add' with no additional arguments just adds another rule
for the main table - which exists by default. Require at least
1 argument similar to delete.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
'ip ru flush' currently removes all rules with priority > 0 regardless
of any other command line arguments passed in. Update flush_rule to
call filter_nlmsg to determine if the rule should be flushed or not.
This enables rule flushing such as 'ip ru flush table 1001' and
'ip ru flush pref 99'.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If libc does not provide strlcpy check for libbsd with pkg-config to
avoid relying on inline version.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently when we add geneve with "ttl inherit", we only set ttl to 0, which
is actually use whatever default value instead of inherit the inner protocol's
ttl value.
To make a difference with ttl inherit and ttl == 0, we add an attribute
IFLA_GENEVE_TTL_INHERIT in kernel commit 52d0d404d39dd ("geneve: add ttl
inherit support"). Now let's use "ttl inherit" to inherit the inner
protocol's ttl, and use "ttl auto" to means "use whatever default value",
the same behavior with ttl == 0.
v2:
1) remove IFLA_GENEVE_TTL_INHERIT defination in if_link.h as it's already
updated.
2) Still use addattr8() so we can enable/disable ttl inherit, as Michal
suggested.
v3: Update man page
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
In case caller did not specify 'segs' parameter, parse_srh() would read
garbage while iterating over 'segbuf'. Avoid this by initializing
'segbuf' to an empty string.
Fixes: e8493916a8 ("iproute: add support for SR-IPv6 lwtunnel encapsulation")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If call to rta_addattr_l() failed, parse_encap_seg6() would leak memory.
Fix this by making sure calls to free() are not skipped.
Fixes: bd59e5b151 ("ip-route: Fix segfault with many nexthops")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No function, filter, or print function uses the sockaddr_nl arg,
so just drop it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Passing the return value of RTA_DATA() to rta_getattr_u32() is wrong
since that function will call RTA_DATA() by itself already.
Fixes: a7ad1c8a68 ("ipaddrlabel: add json support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
I seem to have had a massive brainfart with uses of
parse_rtattr_nested(). The rtattr* array must have MAX+1 elements, and
the call to parse_rtattr_nested must have MAX as its bound. Let's fix
those.
Fixes: b26fc590ce ("ip: add MACsec support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for the new backup port option that can be set
on a bridge port. If the port's carrier goes down all of the traffic
gets redirected to the configured backup port. We add the following new
arguments:
$ ip link set dev brport type bridge_slave backup_port brport2
$ ip link set dev brport type bridge_slave nobackup_port
$ bridge link set dev brport backup_port brport2
$ bridge link set dev brport nobackup_port
The man pages are updated respectively.
Also 2 minor style adjustments:
- add missing space to bridge man page's state argument
- use lower starting case for vlan_tunnel in ip-link man page (to be
consistent with the rest)
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Adds new option extern_learn to set NTF_EXT_LEARNED flag
on neigh entries.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
We should only show ttl inherit when IFLA_VXLAN_TTL_INHERIT supplied.
Otherwise show the ttl number, or auto when it is 0.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
rtnl_wilddump_stats_req_filter only takes RTM_GETSTATS as the type argument
so rename to rtnl_statsdump_req_filter for consistency with other request
functions and hardcode the type argument.
Signed-off-by: David Ahern <dsahern@gmail.com>
Rename rtnl_wilddump_req_filter to rtnl_linkdump_req_filter,
rtnl_wilddump_request to rtnl_linkdump_req and
rtnl_wilddump_req_filter_fn to rtnl_linkdump_req_filter_fn.
In all cases drop the type argument which at this point is only
RTM_GETLINK and hardcode in the functions.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_nsiddump_req for namespace id dumps using the proper rtgenmsg
as the header. Convert existing RTM_GETNSID dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_neightbldump_req for neighbor table dumps using the proper ndtmsg
as the header. Convert existing RTM_GETNEIGHTBL dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_ruledump_req for fib fule dumps using the proper fib_rule_hdr
as the header. Convert existing RTM_GETRULE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_netconfdump_req for netconf dumps using the proper netconfmsg
as the header. Convert existing RTM_GETNETCONF dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrlbldump_req for address label dumps using the proper
ifaddrlblmsg as the header. Convert existing RTM_GETADDRALBEL dumps
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_routedump_req for route dumps using the proper rtmsg
as the header. Convert existing RTM_GETROUTE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrdump_req for address dumps using the proper ifaddrmsg
as the header. Convert existing RTM_GETADDR dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
While at it also add missing text for proxy in the man page.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Take into account the configured preferred_family if neither saddr or
daddr are provided since otherwise vxlan kernel module will use IPv4 as
default remote inet family neglecting the one provided by userspace.
This behaviour was originally in commit 97d564b90c ("vxlan: use
preferred address family when neither group or remote is specified").
The issue can be triggered with the following reproducer:
$ip -6 link add vxlan1 type vxlan id 42 dev enp0s2 \
proxy nolearning l2miss l3miss
$bridge fdb add 46:47:1f:a7:1c:25 dev vxlan1 dst 2000::2
RTNETLINK answers: Address family not supported by protocol
Fixes: 1e9b8072de ("iplink_vxlan: Get rid of inet_get_addr()")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
After commit d42c7891d2 ("utils: Do not reset family for default, any,
all addresses"), when call get_addr() for any/all addresses, we will set
addr->flags to ADDRTYPE_INET_UNSPEC if family is AF_INET/AF_INET6, which
makes is_addrtype_inet() checking passed and assigns incorrect address
to kernel. The ip link cmd will return error like:
]# ip link add ipip1 type ipip local any remote 1.1.1.1
RTNETLINK answers: Numerical result out of range
Fix it by using is_addrtype_inet_not_unspec() to avoid unspec addresses.
geneve, vxlan are not affected as they use AF_UNSPEC family when call
get_addr()
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: d42c7891d2 ("utils: Do not reset family for default, any, all addresses")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
IPVLAN and IPVTAP are using the same functions and parameters. So we can
just add a new link_util with id ipvtap. Others are the same.
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Conflicts:
ip/iproute_lwtunnel.c
In addition to merge conflict between bd59e5b151 and 94a8722f2f,
updated the code added by the latter commit based on the change of the
former (ie., added ret = to the new rta_addattr_l).
Signed-off-by: David Ahern <dsahern@gmail.com>
Common pattern in iproute commands is to print a line seperator
in non-json mode. Make that a simple function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
It was possible to crash ip-route by adding an IPv6 route with 37
nexthop statements. A simple reproducer is:
| for i in `seq 37`; do
| nhs="nexthop via 1111::$i "$nhs
| done
| ip -6 route add 3333::/64 $nhs
The related code was broken in multiple ways:
* parse_one_nh() assumed that rta points to 4kB of storage but caller
provided just 1kB. Fixed by passing 'len' parameter with the correct
value.
* Error checking of rta_addattr*() calls in parse_one_nh() and called
functions was completely absent, so with above fix in place output
flood would occur due to parser looping forever.
While being at it, increase message buffer sizes to 4k. This allows for
at most 144 nexthops.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
These are primarily fixes for "string is not string literal" warnings
/ errors (with -Werror -Wformat-nonliteral). This should be a no-op
change. I had to replace couple of print helper functions with the
code they call as it was becoming harder to eliminate these warnings,
however these helpers were used only at couple of places, so no
major change as such.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When creating socket() AF_INET is used irrespective of the family
that is given at the command-line (with -4, -6, or -0). This change
will open the socket with the preferred family.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When adding support for JSON output the new code for printing
the destination prefix adds a stray blank character before
the bitmask. This causes some user-space parsing to fail.
Current output:
...: from x.x.x.x/l to y.y.y.y /l
Previous output:
...: from x.x.x.x/l to y.y.y.y/l
Fixes: 0dd4ccc5 "iprule: add json support"
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow for -color={never,auto,always} to have colored output disabled,
enabled only if stdout is a terminal or enabled regardless of stdout
state.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This allows the user to specify the LWTUNNEL_IP_SRC/LWTUNNEL_IP6_SRC
when setting an lwtunnel encapsulation route.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Instead of calling enable_color() conditionally with identical check in
three places, introduce check_enable_color() which does it in one place.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
This option can't be set by user and is never printed.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David Ahern <dsahern@gmail.com>
This option can't be set by user and is never printed. Furthermore,
L2TP_ATTR_DATA_SEQ has always been a noop in Linux.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David Ahern <dsahern@gmail.com>
When 'ip link show dev DEVICE' is processed in a batch mode, ip exits
and stop processing further commands.
This because ipaddr_list_flush_or_save() calls exit() to avoid printing
the link information twice.
Replace the exit with a classic goto out instruction.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for the End.BPF action of the seg6local
lightweight tunnel. Functions from the BPF lightweight tunnel are
re-used in this patch. Example:
$ ip -6 route add fc00::18 encap seg6local action End.BPF endpoint
obj my_bpf.o sec my_func dev eth0
$ ip -6 route show fc00::18
fc00::18 encap seg6local action End.BPF endpoint my_bpf.o:[my_func]
dev eth0 metric 1024 pref medium
v2: - re-use of print_encap_bpf_prog instead of fprintf
- introduction of "endpoint" keyword for more consistency with
others parameters
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since commit 9516823051 ("ipaddress: Improve print_linkinfo()") we
return -1 instead of 0 when ip-address(8) label does not match network
device name as we did before change. This causes regression when trying
to output ip address matching label:
# ip addr add 192.168.192.1/24 dev lo label lo:1
# ip addr show label lo:1
<no output>
This is special case and return 0 from print_linkinfo() earlier to match
only filter.ifindex and filter.up if given, but not rest fields in
@filter. Then call print_selected_addrinfo() without calling
print_link_stats() in ipaddr_list_flush_or_save().
Later print_selected_addrinfo() calls print_addrinfo() that finally
matches IFA_LABEL attribute in netlink buffer with filter.label using
ifa_label_match_rta().
On the other hand there is three conditions checked in print_linkinfo()
to determine label special case:
1) filter.label != NULL
2) filter.family == AF_UNSPEC || filter.family == AF_PACKET
3) fnmatch(filter.label, name, 0)
With 1) it is ok to check if filtering by label is on by given pattern
in @filter.label.
Since label is IPv4 specific and AF_PACKET is for printing ip-link(8)
information (see ipaddr_link_list()::ipaddress.c as example) checking
for AF_PACKET in 2) doesn't take much sense: better to defer these
checks to print_addrinfo() determine valid combinations before calling
ifa_label_match_rta() to finally match IFA_LABEL to pattern in
filter.label.
For 3) we have following call for test case:
fnmatch(pattern, string, flags) ->
fnmatch(filter.label, name, 0) ->
fnmatch("lo:1", "lo", 0) == FNM_NOMATCH (1) or non-zero on error
To support special case in print_linkinfo() for filtering by label we
only need to check if label pattern is given in filter.label and return
0 to skip print_link_stats() in ipaddr_list_flush_or_save(): actual
filtering will be done in print_addrinfo().
Before commit 9516823051 ("ipaddress: Improve print_linkinfo()"):
-------------------------------------------------------------------
$ ip addr sh label lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN \
group default qlen 1000
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
fnmatch("lo", "lo", 0) == 0
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ip addr show label 'lo:*'
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip addr sh label lo:1
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip -4 addr sh label lo:1
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN \
group default qlen 1000
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
filter.family == AF_INET
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
After this change applied:
--------------------------
$ ip/ip addr show label lo
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ip/ip addr show label 'lo:*'
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip/ip addr show label lo:1
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
$ ip/ip -4 addr show label lo:1
inet 192.168.192.1/24 scope global lo:1
valid_lft forever preferred_lft forever
Note that we no longer show link information as we did previously:
we are filtering by "label" pattern, not showing by "dev".
Fixes: commit 9516823051 ("ipaddress: Improve print_linkinfo()")
Reported-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
NUD_NOARP entries are filtered out by default by iproute2.
We dont want NUD_NOARP with NTF_EXT_LEARNED flag filtered out.
This patch extends the default filter check for ip neigh show
to include the NTF_EXT_LEARNED flag.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel now supports attaching XDP programs in the driver
and hardware at the same time. Print that information
correctly.
In case there are multiple programs attached kernel will
not provide IFLA_XDP_PROG_ID, so don't expect it to be
there (this also improves the printing for very old kernels
slightly, as it avoids unnecessary "prog/xdp" line).
In short mode preserve the current outputs but don't print
IDs if there are multiple.
6: netdevsim0: <BROADCAST,NOARP> mtu 1500 xdpoffload/id:11 qdisc [...]
and:
6: netdevsim0: <BROADCAST,NOARP> mtu 1500 xdpmulti qdisc [...]
ip link output will keep using prog/xdp prefix if only one program
is attached, but can also print multiple program lines:
prog/xdp id 8 tag fc7a51d1a693a99e jited
vs:
prog/xdpdrv id 8 tag fc7a51d1a693a99e jited
prog/xdpoffload id 9 tag fc7a51d1a693a99e
JSON output gains a new array called "attached" which will
contain the full list of attached programs along with their
attachment modes:
"xdp": {
"mode": 3,
"prog": {
"id": 11,
"tag": "fc7a51d1a693a99e",
"jited": 0
},
"attached": [ {
"mode": 3,
"prog": {
"id": 11,
"tag": "fc7a51d1a693a99e",
"jited": 0
}
} ]
},
In case there are multiple programs attached the general "xdp"
section will not contain program information:
"xdp": {
"mode": 4,
"attached": [ {
"mode": 1,
"prog": {
"id": 10,
"tag": "fc7a51d1a693a99e",
"jited": 1
}
},{
"mode": 3,
"prog": {
"id": 11,
"tag": "fc7a51d1a693a99e",
"jited": 0
}
} ]
},
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for the new isolated port option which, if set,
would allow the isolated ports to communicate only with non-isolated
ports and the bridge device. The option can be set via the bridge or ip
link type bridge_slave commands, e.g.:
$ ip link set dev eth0 type bridge_slave isolated on
$ bridge link set dev eth0 isolated on
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for OUTPUT_MARK in xfrm state to exercise the
functionality added by kernel commit 077fbac405bf
("net: xfrm: support setting an output mark.").
Sample output-
(with mark and output-mark)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
mark 0x10000/0x3ffff output-mark 0x20000
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(with mark only)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
mark 0x10000/0x3ffff
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(with output-mark only)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
output-mark 0x20000
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
(no mark and output-mark)
src 192.168.1.1 dst 192.168.1.2
proto esp spi 0x00004321 reqid 0 mode tunnel
replay-window 0 flag af-unspec
auth-trunc xcbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b211 96
enc cbc(aes) 0x3ed0af408cf5dcbf5d5d9a5fa806b233
anti-replay context: seq 0x0, oseq 0x0, bitmap 0x00000000
v1->v2: Moved the XFRMA_OUTPUT_MARK print after XFRMA_MARK in
xfrm_xfrma_print() as mentioned by Lorenzo
v2->v3: Fix one help formatting error as mentioned by Lorenzo.
Keep mark and output-mark on the same line and add man page info as
mentioned by David.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds basic support for Qualcomm rmnet devices.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As mentioned in the ip-address man page, an address label must
be equal to the device name or prefixed by the device name
followed by a colon. Currently the only check on this input is
to see if the device name appears at the beginning of the label
string.
This commit adds an additional check to ensure label == dev or
continues with a colon.
Signed-off-by: Patrick Talbert <ptalbert@redhat.com>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The 'link-netnsid' argument needs a number. Add 'link-netns' when the user
wants to use the iproute2 netns name instead of the nsid.
Example:
ip link add ipip1 link-netns foo type ipip remote 10.16.0.121 local 10.16.0.249
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When iproute2 has a name for the nsid, let's display it. It's more
user friendly than a number.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Parse and display those attributes.
Example:
ip l a type dummy
ip netns add foo
ip monitor link&
ip l s dummy1 netns foo
Deleted 6: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default
link/ether 66:af:3a:3f:a0:89 brd ff:ff:ff:ff:ff:ff new-nsid 0 new-ifindex 6
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, calling 'ip xfrm monitor all' will
actually invoke the 'all-nsid' command because the
soft-match for 'all-nsid' occurs before the precise
match for 'all'. This patch rearranges the checks
so that the 'all' command, itself an alias for
invoking 'ip xfrm monitor' with no argument, can
be called consistent with the syntax for other ip
commands that accept an 'all'.
Signed-off-by: Nathan Harold <nharold@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
A recent commit changed rtnl_talk_* to return the response message in
allocated memory so callers need to free it. The change to name_is_vrf
did not save the device index which is pointing to a struct inside the
now allocated and freed memory resulting in garbage getting returned
in some cases.
Fix by using a stack variable to save the return value and only set
it to ifi->ifi_index after all checks are done and before the answer
buffer is freed.
Fixes: 86bf43c7c2 ("lib/libnetlink: update rtnl_talk to support malloc buff at run time")
Cc: Hangbin Liu <liuhangbin@gmail.com>
Cc: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
RTA_CACHEINFO can be sent for non-cloned routes. If the attribute is
present print it. Allows route dumps to print expires times for example
which can exist on FIB entries.
Signed-off-by: David Ahern <dsahern@gmail.com>
The ip command would always lookup the network device index
even when not necessary. This slows down operations like creating
lots of VLAN's.
David reported the original issue, this is an alternative patch
that solves it in a slightly more general method.
Using iproute2 to create a bridge and add 4094 vlans to it can take from
2 to 3 *minutes*. The reason is the extraneous call to ll_name_to_index.
ll_name_to_index results in an ioctl(SIOCGIFINDEX) call which in turn
invokes dev_load. If the index does not exist, which it won't when
creating a new link, dev_load calls modprobe twice -- once for
netdev-NAME and again for NAME. This is unnecessary overhead for each
link create.
When ip link is invoked for a new device, there is no reason to
call ll_name_to_index for the new device. With this patch, creating
a bridge and adding 4094 vlans takes less than 3 *seconds*.
old:
# time ip -batch ip-vlan.batch
real 3m13.727s
user 0m0.076s
sys 0m1.959s
new:
# time ip -batch ip-vlan.batch
real 0m3.222s
user 0m0.044s
sys 0m1.777s
Reported-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
rta_expires is a signed int; print it as one.
Fixes: 663c3cb231 ("iproute: implement JSON and color output")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Continue parsing a multipath payload as long as another nexthop can fit
in the payload.
# ip route add 192.0.2.0/24 nexthop dev dummy0 nexthop dev dummy1
Before:
# ip route show 192.0.2.0/24
192.0.2.0/24
nexthop dev dummy0 weight 1
After:
# ip route show 192.0.2.0/24
192.0.2.0/24
nexthop dev dummy0 weight 1
nexthop dev dummy1 weight 1
Fixes: f48e14880a ("iproute: refactor multipath print")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_uint() will silently promote its variable type to uint64_t, but there
is nothing that ensures that the format string specifier passed along with
it fits (and the function name suggest to pass "%u").
Fix this by changing print_uint() to use a native 'unsigned int' type, and
introduce a separate print_u64() function for printing 64-bit values. All
call sites that were actually printing 64-bit values using print_uint() are
converted to use print_u64() instead.
Since print_int() was already using native int types, just add a
print_s64() to match, but don't convert any call sites. For symmetry,
also add a print_luint() method (with no users).
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, iproute allows setting those flags, but it's impossible to
clear them, since their current value is fetched from the kernel and
then we OR in the additional flags passed on the command line.
Add no* variants to allow clearing them.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Commit 6c4b672738 ("iplink_geneve: Get rid of inet_get_addr()")
inadvertently changed the parameter to addattr_l() resulting in:
addattr_l ERROR: message exceeded bound of 4
when remote is specified.
Fixes: 6c4b672738 ("iplink_geneve: Get rid of inet_get_addr()")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Like kernel net-next commit 72f6d71e491e6 ("vxlan: add ttl inherit support"),
vxlan ttl inherit should means inherit the inner protocol's ttl value.
But currently when we add vxlan with "ttl inherit", we only set ttl 0,
which is actually use whatever default value instead of inherit the inner
protocol's ttl value.
To make a difference with ttl inherit and ttl == 0, we add an attribute
IFLA_VXLAN_TTL_INHERIT when "ttl inherit" specified. And use "ttl auto"
to means "use whatever default value", the same behavior with ttl == 0.
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Attempt to add a multipath route where a nexthop definition refers to a
non-existent device causes 'ip' to crash and burn due to stack buffer
overflow:
# ip -6 route add fd00::1/64 nexthop dev fake1
Cannot find device "fake1"
Cannot find device "fake1"
Cannot find device "fake1"
...
Segmentation fault (core dumped)
Don't ignore errors from the helper routine that parses the nexthop
definition, and abort immediately if parsing fails.
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
The offset and peer_offset parameters are only printed to avoid
confusing external scripts that may parse "ip l2tp show session"
output. There's no reason to keep them in JSON.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Ignore options "peer-offset" and "offset" when creating sessions. Keep
them when dumping sessions in order to avoid breaking external scripts.
"peer-offset" has always been a noop in iproute2. "offset" is now
ignored in Linux 4.16 (and was broken before that).
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Stephen Hemminger
Tobias Jungel
Matteo Croce
Nikolay Aleksandrov
Thomas Haller
David Ahern
Phil Sutter
Luca Boccassi
Davide Caratti
wenxu
Jakub Kicinski
Benedict Wong
Stephen Hemminger
Martin Jeřábek
Andrea Claudi
Nicolas Dichtel
Stefano Brivio
Hangbin Liu
Sabrina Dubroca
Roopa Prabhu
Lorenzo Bianconi
Mahesh Bandewar
Stefan Bader
Shmulik Ladkani
Guillaume Nault
Eran Ben Elisha
Mathieu Xhonneux
Serhey Popovych
Subash Abhinov Kasiviswanathan
Daniele Palmas
Patrick Talbert
Nathan Harold
Ido Schimmel
Toke Høiland-Jørgensen
Jakub Sitnicki