If a header that includes linux/in6.h is included before
iproute's utils.h, then iproute2 fails to compile on older
glibc versions.
Fixes: e8493916a8 ("iproute: add support for SR-IPv6 lwtunnel encapsulation")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
After upstream commit 5071034e4af7 ('neigh: Really delete an arp/neigh entry
on "ip neigh delete" or "arp -d"'), we could delete a single FAILED neighbour
entry now. But `ip neigh flush` still skip the FAILED entry.
Move the filter after first round flush so we can flush FAILED entry on fixed
kernel and also do not keep retrying on old kernel.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
When the user specifies `table all` or `table 0` to
the `ip mroute show` command we dump the entirety of
the known mroute tables. Without some sort of
divisor to tell us what table we are looking at
the command is useless.
Add `Table: <vrf name>` to the output of 'ip mroute show table 0'
Follow the convention established by 'ip route show table 0'
for when to display
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This option is documented in gre6 help, but was not supported.
Fixes: af89576d7a ("iproute2: GRE over IPv6 tunnel support.")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
When modifying a route we set the RTA_OIF attribute only if a device was
specified with "dev" or "oif" keyword. But for some unknown reason we
earlier alternatively check also for the presence of "nexthop" keyword,
even though it has no effect. So remove the pointless check.
Signed-off-by: Jakub Sitnicki <jkbs@redhat.com>
Add IFLA_EVENT output so that event types can be viewed with
'monitor' command. This gives a little more information for why
a given message was received.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Uses newly introduced RTM_GETROUTE flag RTM_F_FIB_MATCH
to return a matching fib route. Introduces 'fibmatch'
keyword to ip route get.
ipv4:
----
$ip route show
default via 192.168.0.2 dev eth0
10.0.14.0/24
nexthop via 172.16.0.3 dev dummy0 weight 1
nexthop via 172.16.1.3 dev dummy1 weight 1
$ip route get 10.0.14.2
10.0.14.2 via 172.16.1.3 dev dummy1 src 172.16.1.1
cache
$ip route get fibmatch 10.0.14.2
10.0.14.0/24
nexthop via 172.16.0.3 dev dummy0 weight 1
nexthop via 172.16.1.3 dev dummy1 weight 1
ipv6:
----
$ip -6 route show
2001:db9:100::/120 metric 1024
nexthop via 2001:db8:2::2 dev dummy0 weight 1
nexthop via 2001:db8:12::2 dev dummy1 weight 1
$ip -6 route get 2001:db9:100::1
2001:db9:100::1 from :: via 2001:db8:12::2 dev dummy1 \
src 2001:db8:12::1 metric 1024 pref medium
$ip -6 route get fibmatch 2001:db9:100::1
2001:db9:100::/120 metric 1024
nexthop via 2001:db8:12::2 dev dummy1 weight 1
nexthop via 2001:db8:2::2 dev dummy0 weight 1
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Add to usage message a description of how to configure Infiniband node
and port GUIDs. Also modify the man page to emphasize the GUIDs are
configured for Infiniband VFs.
Fixes: d91fb3f4c7 ("Add support for configuring Infiniband GUIDs")
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Since commit a8f820a380a2a06 ('can: add Virtual CAN Tunnel driver (vxcan)')
for Linux 4.12 a virtual CAN tunnel driver analogue to veth is available in
Linux.
This patch adds the ability to create vxcan device pairs.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Change print_linkinfo_brief to take the filter as an input arg.
If the arg is NULL, use the global filter in ipaddress.c.
Signed-off-by: David Ahern <dsahern@gmail.com>
ipaddr_list_flush_or_save generates a list of nlmsg's for links and
optionally for addresses. Move the code into ip_linkaddr_list and
export it along with the supporting infrastructure.
API to use this function is:
struct nlmsg_chain linfo = { NULL, NULL};
struct nlmsg_chain ainfo = { NULL, NULL};
ip_linkaddr_list(family, filter_req, &linfo, &ainfo);
... error checking and code looping over linfo/ainfo ...
free_nlmsg_chain(&linfo);
free_nlmsg_chain(&ainfo);
Signed-off-by: David Ahern <dsahern@gmail.com>
Follow-up to d67b9cd28c1d ("xdp: refine xdp api with regards to
generic xdp") in order to update the XDP dumping part.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Including libc headers first helps as a workaround to redefinition of struct
ethhdr with a suitably patched musl libc that suppresses the kernel
if_ether.h.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Ability to change vxlan device attributes was added to kernel through
commit 8bcdc4f3a20b ("vxlan: add changelink support"), however one
cannot do the same through ip(8) command. Changing the allowed vxlan
device attributes using 'ip link set dev <vxlan_name> type vxlan
<allowed_attributes>' currently fails with 'operation not supported'
error. This failure is due to the incorrect rtnetlink message
construction for the 'ip link set' operation.
The vxlan_parse_opt() callback function is called for parsing options
for both 'ip link add' and 'ip link set'. For the 'add' case, we pass
down default values for those attributes that were not provided as CLI
options. However, for the 'set' case we should be only passing down the
explicitly provided attributes and not any other (default) attributes.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
syntax:
ip xfrm state .... offload dev <if-name> dir <in or out>
Example to add inbound offload:
ip xfrm state .... offload dev mlx0 dir in
Example to add outbound offload:
ip xfrm state .... offload dev mlx0 dir out
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Follow-up to commit c7272ca720 ("bpf: add initial support for
attaching xdp progs") to also support generic XDP. This adds an
indicator for loaded generic XDP programs when programs are loaded
as shown in c7272ca720, but the driver still lacks native XDP
support.
# ip link
[...]
3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 xdpgeneric qdisc [...]
link/ether 0c:c4:7a:03:f9:25 brd ff:ff:ff:ff:ff:ff
[...]
In case the driver does support native XDP, but the user wants
to load the program as generic XDP (e.g. for testing purposes),
then this can be done with the same semantics as in c7272ca720,
but with 'xdpgeneric' instead of 'xdp' command for loading:
# ip -force link set dev eno1 xdpgeneric obj xdp.o
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David S. Miller <davem@davemloft.net>
As noticed by one of the few users of routel script, it ends up in an
infinite loop when they pull out the cable from the NIC used for some
route. This is caused by its parser expecting the line of "ip route show"
output consists of "key value" pairs (except for the initial target range),
together with an old trap of Bourne style shells that "shift 2" does
nothing if there is only one argument left. Some keywords, e.g. "linkdown",
are not followed by a value.
Improve the parser to
(1) only set variables for keywords we care about
(2) recognize (currently) known keywords without value
This is still far from perfect (and certainly not future proof) but to
fully fix the script, one would probably have to rewrite the logic
completely (and I'm not sure it's worth the effort).
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
This attribute allows the administrator to adjust the packet marking
attribute of tunnels that support policy based routing.
Signed-off-by: Craig Gallek <kraig@google.com>
This patch adds commands to support the tunnel source properties
("ip sr tunsrc") and the HMAC key -> secret, algorithm binding
("ip sr hmac").
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
'ip vrf pids' is used to list processes bound to a vrf, but it only
shows the pid leaving a lot of work for the user. Add the command
name to the output. With this patch you get the more user friendly:
$ ip vrf pids mgmt
1121 ntpd
1418 gdm-session-wor
1488 gnome-session
1491 dbus-launch
1492 dbus-daemon
1565 sshd
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
'ip vrf pids' is used to list processes bound to a vrf, but it only
shows the pid leaving a lot of work for the user. Add the command
name to the output. With this patch you get the more user friendly:
$ ip vrf pids mgmt
1121 ntpd
1418 gdm-session-wor
1488 gnome-session
1491 dbus-launch
1492 dbus-daemon
1565 sshd
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Currently specifying a device to ip netconf and it dumps only values
for IPv4. Change this to dump data for all families unless a specific
family is given.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Currently, 'ip netconf' only shows ipv4 and ipv6 netconf settings. If IPv6
is not enabled, the dump ends with
RTNETLINK answers: Operation not supported
when IPv6 request is attempted. Further, if the mpls_router module is also
loaded a separate request is needed to get MPLS settings.
To make this better going forward, use the new PF_UNSPEC dump all option
if the kernel supports it. If the kernel does not, it sets NLMSG_ERROR and
returns EOPNOTSUPP which is trapped and we fall back to the existing output
to maintain compatibility with existing kernels.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add support for setting and displaying the ttl attribute
for MPLS IP lighweight tunnels.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Add support for setting and displaying the ttl-propagation attribute
initially used by MPLS to control propagation of MPLS TTL to IPv4/IPv6
TTL/hop-limit on popping final label on a per-route basis.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
These are basically stubs: The types which lacked their own help text
simply don't accept any options (yet). Still it might be a bit confusing
to users if they are presented with the generic 'ip link' help text
instead of something saying there are no type specific options.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Take help function in iplink_bridge.c as an example and make other link
types' help functions similar:
* Use a single fprintf() call (if possible).
* Don't state a full command line, just "... type OPTIONS".
* Put every option in it's own line, align options by column.
* List mandatory options first.
link_veth.c is intentionally left untouched because it's 'peer' option
eats all kinds of generic link options and the help text points this out
without duplicating all the options there again.
Signed-off-by: Phil Sutter <phil@nwl.cc>
When neither group or remote is specified (or if they are specified with
the any address), nothing is sent to the kernel. In this case, the
kernel defaults to IPv4. This makes impossible to use IPv6 with
unspecified unicast remote ("bridge fdb add" will return
EAFNOTSUPPORT).
If the user specifies a preferred address family (eg, "ip -6 link add"),
then send either IFLA_VXLAN_GROUP or IFLA_VXLAN_GROUP6 to enforce the
use of the appropriate family.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
MPLS multipath routes are missing a space between 'nexthop' and 'via':
$ ip -net ns1 -f mpls ro ls
100
nexthopvia inet 172.16.2.2 dev virt12
nexthopvia inet 172.16.3.2 dev br0
Add it.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add support for new afstats subcommand. This uses the new
IFLA_STATS_AF_SPEC attribute of RTM_GETSTATS messages to show
per-device, AF-specific stats. At the moment the kernel only supports
MPLS AF stats, so that is all that's implemented here.
The print_num function is exposed from ipaddress.c to be used for
printing the new stats so that the human-readable option, if set, can
be respected.
Example of use:
$ ./ip/ip -f mpls link afstats dev eth1
3: eth1
mpls:
RX: bytes packets errors dropped noroute
9016 98 0 0 0
TX: bytes packets errors dropped
7232 113 0 0
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Use the new helper functions rta_getattr_u* instead of direct
cast of RTA_DATA(). Where RTA_DATA() is a structure, then remove
the unnecessary cast since RTA_DATA() is void *
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for MPLS netconf to ip monitor and ip netconf commands.
Changes to header files not included as those are typically pulled
in my a header sync with the kernel.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
This patch adds support to the bridge_slave link type for displaying
xstats by reusing the previously added bridge xstats callbacks.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch adds support for a new xstats link subcommand which uses the
specified link type's new parse/print_ifla_xstats callbacks to display
extended statistics.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since cgroups are not namespace aware, the directory heirarchy used by
ip vrf should account for network namespaces. In this case, change the
path from CGRP/BASE/vrf/NAME to CGRP/BASE/NETNS/vrf/NAME where CGRP is
the cgroup2 mount path, BASE in any base heirarchy inherited before VRF
is applied and NAME is the VRF name.
The intent is as follows: a user logs into the box into some namespace
with a name known to iproute2. Some other policy may have put the
process into a BASE heirarchy. From there the user executes a task in
a VRF and in doing so the task heirarchy becomes CGRP/BASE/NETNS/vrf/NAME.
The namespace level is omitted for the default namespace.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Move guts of netns_identify into a standalone function that returns
the netns name in a given buffer.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add support for VRF in a pre-existing hierarchy. For example, if the
current process is running in CGRP/foo/bar, the 'ip vrf exec NAME CMD'
should run CMD in the cgroup CGRP/foo/bar/vrf/NAME.
When listing process ids in a VRF, search for the directory vrf/NAME
regardless of base path (foo/bar/vrf/NAME and vrf/NAME) are still
running against the same vrf NAME.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
This patch implements support for the IFLA_BRPORT_FLUSH attribute
in iproute2 so it can flush bridge slave's fdb dynamic entries.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_MCAST_MLD_VERSION
attribute in iproute2 so it can change the mcast mld version.
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
This patch implements support for the IFLA_BR_MCAST_IGMP_VERSION
attribute in iproute2 so it can change the mcast igmp version.
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
This patch implements support for the IFLA_BR_MCAST_STATS_ENABLED
attribute in iproute2 so it can enable/disable mcast stats accounting.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_VLAN_STATS_ENABLED
attribute in iproute2 so it can enable/disable vlan stats accounting.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
This patch implements support for the IFLA_BR_FDB_FLUSH attribute
in iproute2 so it can flush bridge fdb dynamic entries.
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
This patch adds a new field that is printed in the end of the line which
denotes the real entry state. Before this patch an entry's IIF could
disappear and it would look like an unresolved one (iif = unresolved):
(3.0.16.1, 225.11.16.1) Iif: unresolved
with no way to really distinguish it from an unresolved entry.
After the patch if the dumped entry has RTNH_F_UNRESOLVED set we get:
(3.0.16.1, 225.11.16.1) Iif: unresolved State: unresolved
for unresolved entries and:
(0.0.0.0, 225.11.11.11) Iif: eth4 Oifs: eth3 State: resolved
for resolved entries after the OIF list. Note that "State:" has ':' in
it so it cannot be mistaken for an interface name.
And for the example above, we'd get:
(0.0.0.0, 225.11.11.11) Iif: unresolved State: resolved
Also when dumping all routes via ip route show table all,
it will show up as:
multicast 225.11.16.1/32 from 3.0.16.1/32 table default proto 17 unresolved
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
To specify multiple nexthops in a route the user is expected to use the
"nexthop" keyword which ip route uses to create the RTA_MULTIPATH.
However, ip route always accepts multiple 'via' keywords where only the
last one is used in the route leading to confusion. For example, ip
accepts this syntax:
$ ip ro add vrf red 1.1.1.0/24 via 10.100.1.18 via 10.100.2.18
but the route entered inserted by the kernel is just the last gateway:
1.1.1.0/24 via 10.100.2.18 dev eth2
which is not the full request from the user. Detect the presense of
multiple 'via' and give the user a hint to add nexthop:
$ ip ro add vrf red 1.1.1.0/24 via 10.100.1.18 via 10.100.2.18
Error: argument "via" is wrong: use nexthop syntax to specify multiple via
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Fix "Policy buffer overflow" when trying to use deleteall with many
policies installed.
Signed-off-by: Alexander Heinlein <alexander.heinlein@secunet.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Entries with long vhost names in /proc/net/igmp have no whitespace
between name and colon, so sscanf() adds it to vhost and
'ip maddr show iface' doesn't include inet result.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Show ipv6 tunnel keys on presence of GRE_KEY flag for tunnel types
other than GRE. Aligns ipv6 behaviour with ipv4.
Signed-off-by: dforster@brocade.com
Next up a non-root user gets various bpf related error messages:
$ ip vrf exec mgmt bash
Failed to load BPF prog: 'Operation not permitted'
Kernel compiled with CGROUP_BPF enabled?
Catch the EPERM error and do not show the kernel config option.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
A vrf is local to a namespace. Drop any VRF association before trying
to exec a command in the new namespace.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Path in vrf_switch for "default" VRF is supposed to be MNT/vrf not
MNT/default. Also, default_vrf flag is redundant with ifindex. Remove
the flag in favor of ifindex != 0.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Split ipvrf_identify into arg processing and a function that does the
actual cgroup file parsing. The latter function is used in a follow
on patch.
In the process, convert the reading of the cgroups file to use fopen
and fgets just in case the file ever grows beyond 4k. Move printing
of any error message and the vrf name to the caller of the new
vrf_identify.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Move the hint about CGROUP_BPF enabled to prog_load failure since
it fails before the attach. Update the existing error message to
print to stderr.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
'ip vrf' follows the user semnatics established by 'ip netns'.
The 'ip vrf' subcommand supports 3 usages:
1. Run a command against a given vrf:
ip vrf exec NAME CMD
Uses the recently committed cgroup/sock BPF option. vrf directory
is added to cgroup2 mount. Individual vrfs are created under it. BPF
filter attached to vrf/NAME cgroup2 to set sk_bound_dev_if to the VRF
device index. From there the current process (ip's pid) is addded to
the cgroups.proc file and the given command is exected. In doing so
all AF_INET/AF_INET6 (ipv4/ipv6) sockets are automatically bound to
the VRF domain.
The association is inherited parent to child allowing the command to
be a shell from which other commands are run relative to the VRF.
2. Show the VRF a process is bound to:
ip vrf id
This command essentially looks at /proc/pid/cgroup for a "::/vrf/"
entry with the VRF name following.
3. Show process ids bound to a VRF
ip vrf pids NAME
This command dumps the file MNT/vrf/NAME/cgroup.procs since that file
shows the process ids in the particular vrf cgroup.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
iplink_vrf has 2 functions used to validate a user given device name is
a VRF device and to return the table id. If the user string is not a
device name ip commands with a vrf keyword show a confusing error
message: "RTNETLINK answers: No such device".
Add a variant of rtnl_talk that does not display the "RTNETLINK answers"
message and update iplink_vrf to use it.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Adds support to configure BPF programs as nexthop actions via the LWT
framework.
Example:
ip route add 192.168.253.2/32 \
encap bpf out obj lwt_len_hist_kern.o section len_hist \
dev veth0
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Now that we made the BPF loader generic as a library, reuse it
for loading XDP programs as well. This basically adds a minimal
start of a facility for iproute2 to load XDP programs. There
currently only exists the xdp1_user.c sample code in the kernel
tree that sets up netlink directly and an iovisor/bcc front-end.
Since we have all the necessary infrastructure in place already
from tc side, we can just reuse its loader back-end and thus
facilitate migration and usability among the two for people
familiar with tc/bpf already. Sharing maps, performing tail calls,
etc works the same way as with tc. Naturally, once kernel
configuration API evolves, we will extend new features for XDP
here as well, resp. extend dumping of related netlink attributes.
Minimal example:
clang -target bpf -O2 -Wall -c prog.c -o prog.o
ip [-force] link set dev em1 xdp obj prog.o # attaching
ip [-d] link # dumping
ip link set dev em1 xdp off # detaching
For the dump, intention is that in the first line for each ip
link entry, we'll see "xdp" to indicate that this device has an
XDP program attached. Once we dump some more useful information
via netlink (digest, etc), idea is that 'ip -d link' will then
display additional relevant program information below the "link/
ether [...]" output line for such devices, for example.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
In case of an older kernel that doesn't set L2TP_ATTR_UDP_ZERO_CSUM6_{RX,TX}
the old hard-coded value is being preserved, since the attribute flag will be
missing.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
L2TP_ATTR_UDP_CSUM is read by the kernel as a NLA_FLAG value,
but is validated as a NLA_U8, so we will write it as an u8,
but the value isn't actually being read by the kernel.
It is written by the kernel as a NLA_U8, so we will read as
such.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
L2TP_ATTR_RECV_SEQ and L2TP_ATTR_SEND_SEQ are declared as NLA_U8
attributes in the kernel, so let's threat them accordingly.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
udp6_csum_{tx,rx}, tunnel and session are the only ones
currently used.
recv_seq, send_seq, lns_mode and data_seq are partially
implemented in a useless way.
Signed-off-by: Asbjørn Sloth Tønnesen <asbjorn@asbjorn.st>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
v5:
- rebase and fix checkpatch
v4:
- add MACADDR_SET support
- skip FLAG_UNICAST / FLAG_UNICAST_ALL as this is not upstream
- fix man page
- Support adding, deleting and showing IP rules with UID ranges.
- Support querying per-UID routes via "ip route get uid <UID>".
UID range routing was added to net-next in 4fb7450683 ("Merge
branch 'uid-routing'")
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Commit 7b8179c780 ("iproute2: Add new command to ip link to
enable/disable VF spoof check") tried to add support for
IFLA_VF_SPOOFCHK in a backwards-compatible manner, but aparently overdid
it: parse_rtattr_nested() handles missing attributes perfectly fine in
that it will leave the relevant field unassigned so calling code can
just compare against NULL. There is no need to layback from the previous
(IFLA_VF_TX_RATE) attribute to the next to check if IFLA_VF_SPOOFCHK is
present or not. To the contrary, it establishes a potentially incorrect
assumption of these two attributes directly following each other which
may not be the case (although up to now, kernel aligns them this way).
This patch cleans up the code to adhere to the common way of checking
for attribute existence. It has been tested to return correct results
regardless of whether the kernel exports IFLA_VF_SPOOFCHK or not.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Greg Rose <grose@lightfleet.com>
Recently a new per-port flag was added which controls the flooding of
unknown multicast, this patch adds support for controlling it via iproute2.
It also updates the man pages with information about the new flag.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
iprule_flush() and iprule_list_or_save() both call function
rtnl_wilddump_request() and rtnl_dump_filter(). So merge them
together just like other files do.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Introduce a new API that exposes a list of vlans per VF (IFLA_VF_VLAN_LIST),
giving the ability for user-space application to specify it for the VF as
an option to support 802.1ad (VST QinQ).
We introduce struct vf_vlan_info, which extends struct vf_vlan and adds
an optional VF VLAN proto parameter.
Default VLAN-protocol is 802.1Q.
Add IFLA_VF_VLAN_LIST in addition to IFLA_VF_VLAN to keep backward
compatibility with older kernel versions.
Suitable ip link tool command examples:
- Set vf vlan protocol 802.1ad (S-TAG)
ip link set eth0 vf 1 vlan 100 proto 802.1ad
- Set vf vlan S-TAG and vlan C-TAG (VST QinQ)
ip link set eth0 vf 1 vlan 100 proto 802.1ad vlan 30 proto 802.1Q
- Set vf to VST (802.1Q) mode
ip link set eth0 vf 1 vlan 100 proto 802.1Q
- Or by omitting the new parameter (backward compatible)
ip link set eth0 vf 1 vlan 100
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Add support to dump the mroute cache entry age if the show_stats (-s)
switch is provided.
Example:
$ ip -s mroute
(0.0.0.0, 239.10.10.10) Iif: eth0 Oifs: eth0
0 packets, 0 bytes, Age 245.44
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
The calling of netns_map_init() before command parsing introduced
a performance issue with large number of namespaces.
As commands such as add, del and exec do not need to iterate through
/var/run/netns it would be good not no build the cache before executing
these commands.
Example:
unpatched:
time seq 1 1000 | xargs -n 1 ip netns add
real 0m16.832s
user 0m1.350s
sys 0m15.029s
patched:
time seq 1 1000 | xargs -n 1 ip netns add
real 0m3.859s
user 0m0.132s
sys 0m3.205s
Signed-off-by: Anton Aksola <aakso@iki.fi>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The original bond/bridge/vrf and slaves use same id, which make people
confused. Use bond/bridge/vrf_slave as id name will make code more clear.
Acked-by: Phil Sutter <psutter@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
In ip monitor, netns_map_init will check getnsid is supported or not.
But when /proc/self/ns/net does not exist, we just print out error
messages and exit. So user cannot use ip monitor anymore when
CONFIG_NET_NS is disabled:
# ip monitor
open("/proc/self/ns/net"): No such file or directory
If open "/proc/self/ns/net" failed, set have_rtnl_getnsid to false.
Fixes: d652ccbf81 ("netns: allow to dump and monitor nsid")
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
ftell() may return -1 in error case, which is not handled and
therefore pass a negative offset to fseek(). The return code of
fseek() is also not checked.
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
The new mode 'l3s' can be set like -
ip link add link <master> dev <IPvlan-slave> type ipvlan mode l3s
e.g. ip link add link eth0 dev ipvl0 type ipvlan mode l3s
Also did some trivial code restructuring.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
the maximum possible ICV length in a MACsec frame is 16 octects, not 32:
fix get_icvlen() accordingly, so that a proper error message is displayed
in case input 'icvlen' is greater than 16.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
use get_be64() in place of get_u64() when parsing input 'sci' parameter,
so that 'sci' can be entered using network byte order regardless the
endianness of target system; use ntohll() when printing out 'sci'. While
at it, improve documentation of 'sci' in ip-link.8.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
remove hardcoded base 10 parsing of 'port' parameter, update man page
and fix usage() functions as well. Fix misleading line in man page that
theoretically allowed specifying 'port' keyword right after 'sci' keyword.
Provide documentation of 'address' parameter in man pages and in usage()
functions as well.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Show which processes are using which tun/tap devices, e.g.:
$ ip -d tuntap
tun0: tun
Attached to processes: vpnc(9531)
vnet0: tap vnet_hdr
Attached to processes: qemu-system-x86(10442)
virbr0-nic: tap UNKNOWN_FLAGS:800
Attached to processes:
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
If we have multicast routes and do ip route show table all we'll get the
following output:
...
multicast ???/32 from ???/32 table default proto static iif eth0
The "???" are because the rtm_family is set to RTNL_FAMILY_IPMR instead
(or RTNL_FAMILY_IP6MR for ipv6). Add a simple workaround that returns the
real family based on the rtm_type (always RTN_MULTICAST for ipmr routes)
and the rtm_family. Similar workaround is already used in ipmroute, and
we can use this helper there as well.
After the patch the output is:
multicast 239.10.10.10/32 from 0.0.0.0/32 table default proto static iif eth0
Also fix a minor whitespace error and switch to tabs.
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
The code is a bit messy, as it starts with space after text and at some
point switches to space before text. But either way, printing space
before *and* after text almost certainly leads to printing more
whitespace than necessary.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Prior to this patch, If one route entry's RTA_PREFSRC and RTA_GATEWAY
both were NULL, it was supposed to be restored ONLY as a local address.
But as it didn't check tb[RTA_PREFSRC] when restoring local networks,
rtattr_cmp would return a success if it was NULL, this route entry would
be restored again as a local network.
This patch is to add tb[RTA_PREFSRC] check when restoring local networks.
Fixes: 74af8dd962 ("ip route: restore route entries in correct order")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Phil Sutter <phil@nwl.cc>
Currently, the `ip ila` command tries to initialize a genl context
even when we just want to see the help for the command, which doesn't
require to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: ec71cae0bb ("ila: Support for configuring ila to use netfilter hook")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Currently, the `ip fou` command tries to initialize a genl context even
when we just want to see the help for the command, which doesn't require
to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: 6928747b6e ("ip fou: Support to configure foo-over-udp RX")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Currently, the `ip macsec` command tries to initialize a genl context
even when we just want to see the help for the command, which doesn't
require to talk to the kernel at all.
Delay genl initialization, which can fail if the module isn't loaded,
until the point where we will actually need it.
Fixes: b26fc590ce ("ip: add MACsec support")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
All users of genl have the same code to open a genl socket and resolve
the family for their specific protocol. Introduce a helper to initialize
the handle, and use it in all the genl code.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
David Lebrun
Hangbin Liu
Stephen Hemminger
Donald Sharp
Nicolas Dichtel
Jakub Sitnicki
Vlad Yasevich
Roopa Prabhu
Eli Cohen
Oliver Hartkopp
David Ahern
Daniel Borkmann
Remigiusz Kołłątaj
Baruch Siach
Girish Moodalbail
Boris Pismenny
Zhang Shengju
Michal Kubeček
Craig Gallek
David Ahern
Robert Shearman
Timothy Redaelli
Phil Sutter
Vincent Bernat
Nikolay Aleksandrov
Stephen Hemminger
Ralf Baechle
Alexander Heinlein
Jamal Hadi Salim
Petr Vorel
David Forster
Julien Fortin
Thomas Graf
Amir Vadai
Asbjørn Sloth Tønnesen
Daniel Hopf
david decotigny
michael-dev@fami-braun.de
Lorenzo Colitti
Moshe Shemesh
Anton Aksola
Igor Ryzhov
Alexei Starovoitov
Jiri Benc
Liping Zhang
Mahesh Bandewar
Davide Caratti
Andrey Jr. Melnikov
Hannes Frederic Sowa
Eric Dumazet
Xin Long
Sabrina Dubroca
Tom Herbert
Stephen Hemminger