Both ip-link and ip-address support the 'up' argument, however this
isn't documented in neither their help outputs or ip-address' manpage.
This patch fixes that.
Signed-off-by: Petr Šabata <contyk@redhat.com>
Reported-by: Jiří Popelka <jpopelka@redhat.com>
While looking into a sysctl regression in decnet on old kernels I
discovered this omission in the iproute2 documentation.
I can't imagine anyone's muscle memory remembering the longer forms.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Some platforms like ppc64 have unsigned long long as 128 bits, and
the printf format string would cause errors. Resolve this by using
unsigned long long where necessary (or unsigned long).
Fixes Debian bug #700434
Need to table id in filter to be unsigned to avoid conversion to -1
The documentation for "ip" suggests that, when using multiple routing tables, the table ID can be an arbitrary 32 bit number. I've been writing a script that calculates a table Id based on an IP addresses and sets up tables accordingly based on it. This seems to work for everything I've tried except "ip route flush". If you specify a table to flush with an ID over 2^31, it flushes all IPv4 routing tables. For example:
Will delete all routing tables, including the default one. Needless to say, this is quite annoying. I think this is an upstream bug, but your opinions will be greatly appreciated.
This patch improves many error messages as follows:
- For incorrect parameters, show the value of the offending parameter, rather than just say that it is incorrect
- Rephrased messages for clarity
- Rephrased to more `mainstream' english
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
Since do_help() has to return an int to fit in the table of commands,
it should actually return an int. This patch lets it do so.
Signed-off-by: Kees van Reeuwijk <reeuwijk@few.vu.nl>
This is useful to know the 'real' status of an interface (the flag IFF_PROMISC
is exported by the kernel only when the user set it explicitly, for example it
will not be exported when a tcpdump is running).
This information will be displayed when '-details' is provided by the user.
Example:
$ ip -d l l tun10
6: tun10: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN mode DEFAULT
link/sit 10.16.0.249 peer 10.16.0.121
sit remote 10.16.0.121 local 10.16.0.249 ttl inherit pmtudisc 6rd-prefix 2002::/16
promiscuity 2
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
The 'inherit/STRING' or 'inherit/00..ff' syntax indicates that the
TOS field of tunneled packets should be copied from the original IP
header, but for non-IP packets the value STRING or 00..ff should be
used instead. (This syntax is already used by 'ip tunnel show'.)
Also clarify the man page and the command usage text (particularly
that the TOS is not specified as a decimal number).
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Add command that go between network namespace names and process
identifiers. The code builds and runs agains older kernels but
only works on Linux 3.8+ kernels where I have fixed stat to work
properly.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Sometimes "ip netns delete" fails because it can not delete the file a
network namespace was mounted on. If this only happened when a
network namespace was really in use this would be fine, but today it
is possible to pin all network namespaces by simply having a long
running process started with "ip netns exec".
Every mount is copied when a network namespace is created so it is
impossible to prevent the mounts from getting into other mount
namespaces. Modify all mounts in the files and subdirectories of
/var/run/netns to be shared mount points so that unmount events can
propogate, making it unlikely that "ip netns delete" will fail because
a directory is mounted in another mount namespace.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Ben Hutchings pointed out that the return value of do_netns is passed
to exit and the current convention of returning -1 for failure is
inconsitent with that reality.
Return EXIT_FAILURE instead of -1 and EXIT_SUCCESS instead of 0. To make
it clear that the return codes are expected to be passed to exit.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Some systems are now following the advice in
linux/Documentation/sharedsubtrees.txt and running with all mount
points shared between all mount namespaces by default.
After creating the mount namespace call mount on / with
MS_SLAVE|MS_REC to modify all mounts in the new mount namespace to
slave mounts if they are shared or private mounts otherwise.
Guarnateeing that changes to the mount namespace created with
"ip netns exec" don't propgate to other namespaces.
Reported-by: Petr Šabata <contyk@redhat.com>
Tested-by: Petr Šabata <contyk@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Clang doesn't support the gcc extension for embeddeding flexible arrays
inside of structures. Use the slightly more portable alloca().
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
mroute was using /proc/net/ip_mr_[vif|cache] to display mroute entries. Hence,
only RT_TABLE_DEFAULT was displayed and only IPv4.
With rtnetlink, it is possible to display all tables for IPv4 and IPv6. The output
format is kept. Also, like before the patch, statistics are displayed when user specify
the '-s' argument.
The patch also adds the support of 'ip monitor mroute', which is now possible.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch adds a new flag to iproute2 for vxlan devices to enable
DOVE features. It also adds support for L2 and L3 switch lookup miss
netlink messages to "ip monitor".
Changes since v2: fix merge conflict
Changes since v1:
- split "dove" flag into separate feature flags:
- "proxy" for ARP reduction
- "rsc" for route short circuiting
- "l2miss" for L2 switch miss notifications
- "l3miss" for L3 switch miss notifications
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
This patch allows to manage ip tunnels via the interface ip link.
The syntax for parameters is the same that 'ip tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
This patch allows to manage ip6 tunnels via the interface ip link.
The syntax for parameters is the same that 'ip -6 tunnel'.
It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Example of the output:
$ ip monitor netconf&
[1] 24901
$ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
ipv6 dev lo forwarding off
ipv6 dev eth0 forwarding off
ipv6 all forwarding off
$ echo 1 > /proc/sys/net/ipv4/conf/eth0/forwarding
ipv4 dev eth0 forwarding on
$ ip -6 netconf
ipv6 all forwarding on mc_forwarding 0
$ ip netconf show dev eth0
ipv4 dev eth0 forwarding on rp_filter off mc_forwarding 1
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Minor cleanup of original patch, made sure netconf.h matched
result of santized kernel headers
When tclass or flowlabel field were updated, we only performed an OR with the
new value. For example, it was not possible to reset tclass:
ip -6 tunnel change ip6tnl2 tclass 0
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Flag IP6_TNL_F_IGN_ENCAP_LIMIT is set when encaplimit is none, but it was not
removed if encaplimit was set on update (ip tunnel change).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
IPv6 multipath routes were not accepted by "ip route" because an IPv4
address was expected for each gateway. Use `get_addr()` instead of
`get_addr32()`.
Signed-off-by: Vincent Bernat <bernat@luffy.cx>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Added support to ipoib rtnl ops through which one can create, configure,
query and delete IPoIB devices, for example
$ ip link add link ib0.8001 name ib0.8001 type ipoib pkey 0x8001
$ ip link add link ib0.1 name ib0.1 type ipoib mode connected
$ ip --details link show dev ib0.1
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
ip tcp_metrics/tcpmetrics
We support get/del for single entry and dump for
show/flush.
v3:
- fix rtt/rttvar shifts as suggested by Eric Dumazet
- show rtt/rttvar usecs as suggested by David Laight
Signed-off-by: Julian Anastasov <ja@ssi.bg>
When running 'ip monitor neigh', there is no hint to tell if a neighbor is
updated or deleted.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Both macros are used together, so better to have
single define. Update all requests in ipl2tp.c to use the
new macro.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
This functionality is required by checkpoint-restore project. Since the
dump and restore for routes is already done in ip tool it's naturally to
dump and restore addresses in the ip tool as well.
The implementation logic is the same as for the respective one for routes.
The magic number digits are taken from the Seattle coordinates.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Some time ago the save+restore commands were added to ip route (git
id f4ff11e3, Add ip route save/restore). These two save the raw rtnl
stream into a file and restore one (reading it from stdin).
The problem is that there's no way to get the contents of the dump
file in a human readable form. The proposal is to add a command that
reads the rtnl stream from stdin and prints the data in a way the
usual "ip route list" does?
changes since v1:
* Take the magic at the beginning of the dump file into account
* Check for stdin (the dump is taken from) is not a tty
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Stephen Hemminger
Petr Šabata
roopa
Eric W. Biederman
David Ward
Kees van Reeuwijk
Nicolas Dichtel
Mike Frysinger
Strake
Zhi Yong Wu
David L Stevens
Vincent Bernat
Or Gerlitz
Stephen Hemminger
Julian Anastasov
Petr Písař
Pavel Emelyanov