For some address families (like AF_PACKET) it is helpful to have the
length when prenting the address.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
commit f3a2ddc124 ("lib utils: Use helpers to get AF bit/byte len")
used a wrong family or family of zero in the default case
during af_bit_len calculation causing ip route commands to
fail with below error
Error: an inet prefix is expected rather than "10.0.2.14/24".
Reported-by: Sven-Haegar Koch <haegar@sdinet.de>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Sometimes, it is more convenient to get only one specific nested attribute by
type. For example for IFLA_AF_SPEC where type is address family (AF_INET6).
So add this helper for this purpose.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
New netns_switch func moved to the lib/namespace.c from ip/ipnetns.c
so it can be used from the other tools for fast switching
network namespace.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Added another timestamp format to look like more logging info:
[2014-12-22T22:36:50.489 ] 2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default
link/ether 3c:97:0e:a3:86:2e brd ff:ff:ff:ff:ff:ff
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Replaced handling netlink messages by rtnl_dump_filter
from lib/libnetlink.c, also:
- removed unused dump_fp arg;
- added MAGIC_SEQ #define for 123456 seq id;
- silently exit if ENOENT errno is caused for NETLINK_SOCK_DIAG proto
in lib/libnetlink.c: rtnl_duml_filter_l(...) function. This fix
was added in a3fd8e58c1 by Eric
for misc/ss.c
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
There were only few Netlink protocol names
which were printed on the screen:
rtnl, fw, tcpdiag
So added the ability to identify Netlink proto name
from /etc/iproute/nl_protos or from static table.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
ip route change dev tap0 192.168.7.0/24 rto_min 1ms
Error: argument "1ms" is wrong: "rto_min" value is invalid
get_time_rtt() checks for 's' or 'msec' and converts to milliseconds
if needed.
Fixes: 697ac63905 (utils: fix range checking for get_u32/get_u64 et all)
Signed-off-by: Florian Westphal <fw@strlen.de>
Starting from linux-3.15 (commit 9063e21fb026, "netlink: autosize skb
lengths"), kernel is able to send up to 16K in netlink replies.
This change enables iproute2 commands to get bigger chunks,
without breaking compatibility with old kernels.
Signed-off-by: Eric Dumazet <edumazet@google.com>
This adds ARPHRD_NETLINK to ll_types so that it can be properly
shown e.g. in `ip a`:
8: nlmon: <NOARP,UP,LOWER_UP> mtu 3776 qdisc noqueue state UNKNOWN group default
link/netlink
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The kernel already supports it, so add the support
to iproute2 as well.
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
This change adds the interface group to the output of "ip link show".
It also makes "ip link" print _all_ devices if no group filter is specified;
previously, only interfaces of the default group (0) were shown.
Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de>
tv_usec is "suseconds_t" which is apparently usually
a signed long, but sometimes not....
Change the printf modifier to use signed and
cast the tv_usec to long in case it's not already long.
gcc -Wall -Wstrict-prototypes -Werror -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -O2 -I../include -DRESOLVE_HOSTNAMES -DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE -fPIC -c -o utils.o utils.c
utils.c: In function 'print_timestamp':
utils.c:802:2: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type '__suseconds_t' [-Werror=format]
cc1: all warnings being treated as errors
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
This change corrects a kernel incompatibility that was resulting in the
ext_filter_mask not being correctly discovered by the kernel as it is buried
somewhere in the ifinfomsg.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Be more careful about overflow in strtoXX routines.
Checks are based on documented interface on man pages.
Based on suggestion from "Mr Dash Four".
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Recent kernel patches added support for VLAN filtering on the bridge.
This functionality allows one to turn a basic bridge into a VLAN bridge,
where VLANs dicatate packet forwarding and header transformation.
To configure the VLANs on the bridge and its ports a new command is
added to the 'bridge' utility.
# bridge vlan add dev eth0 vid 10 pvid untagged brdev
# bridge vlan add
# bridge vlan delete dev eth0 vid 10
# bridge vlan show
This command supports the following flags:
master - peform the operation on the software bridge device. This is
the default behavior.
self - perform the operation on the hardware associated with the port.
This flag is required when the device is the bridge device and
the configuration is desired on the bridge device itself (not
one of the ports).
pvid - Set the PVID (port vlan id) for a given port. Any untagged
frames arriving on the port will be assigned to this vlan.
untagged - Sets the egress policy of for a given vlan. Default port
egress policy is tagged. Set this flag if you wish traffic
associated with this VLAN to exit the port untagged.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Platforms have different alignment requirements which need to be
fulfilled by the compiler. If the structure elements are already
4 byte (NLMGS_ALIGNTO) aligned by the compiler adding an explicit
padding element (align_rta) is not allowed.
Use __attribute__ ((aligned (NLMSG_ALIGNTO))) in order to achieve
the required alignment.
Experienced on ARM (xscale) with symptom
netlink: 12 bytes leftover after parsing attributes
Tested on:
ARM (32bit Big Endian)
PowerPC (32bit Big Endian)
x86_64 (64bit Little Endian)
Each with different aligment requirments.
Signed-off-by: Lutz Jaenicke <ljaenicke@innominate.com>
The lib makefile doesn't include Config which means it misses
setting up toolchain vars that it includes.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Hello!
While building the iproute package in Debian I get warnings from
package helpers like this:
dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/iproute/sbin/tc debian/iproute/usr/bin/lnstat debian/iproute/bin/ip debian/iproute/bin/ss debian/iproute/sbin/bridge debian/iproute/sbin/rtmon were not linked against libresolv.so.2 (they use none of the library's symbols)
The -lresolv in ./Makefile seems to come from pre-historic times (before
iproute2 git history, possibly from libc5/pre-glibc days).
I couldn't find out if/why there was any reason for linking to libresolv.
Does anyone know if there are any valid reasons for keeping it still?
If not, I'd be happy to see it go.... while at it I also removed includes
of <resolv.h> which I also couldn't find any reason for, but this is
just an added bonus of the patch (and there are probably more unneeded
includes that could be dropped in the same sources).
Signed-off-by: Andreas Henriksson <andreas@fatal.se>
Both macros are used together, so better to have
single define. Update all requests in ipl2tp.c to use the
new macro.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Create libgenl.h and libgenl.c. They will contain
common code for GENL users such as ipl2tp, tcp_metrics, etc.
Somewhat simplified by Stephen Hemminger
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Callers of rtnl_talk check errno value for their needs. In particular, the addrs
and routes restoring code validly reports success if the EEXISTS is in there.
However, the errno value can be sometimes screwed up by the perror call. Thus
we should only set it _after_ the message was emitted.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Eric W. Biederman
Roopa Prabhu
Vadim Kochan
Jiri Pirko
Stephen Hemminger
Dave Taht
Florian Westphal
Eric Dumazet
Daniel Borkmann
Stephen Hemminger
Masatake YAMATO
WANG Cong
Stefan Tomanek
Patric McHardy
Andrey Vagin
Andreas Henriksson
Alexander Duyck
Nicolas Dichtel
Vlad Yasevich
Lutz Jaenicke
Strake
Mike Frysinger
Julian Anastasov
Pavel Emelyanov
Christoph J. Thompson