strslashrsplit() return value is not checked in __dl_argv_handle(),
despite the fact that it can return EINVAL.
This commit fix it and make __dl_argv_handle() return error if
strslashrsplit() return an error code.
Fixes: 2f85a9c535 ("devlink: allow to parse both devlink and port handle in the same time")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The format for erspan/erspan6 output is not valid JSON, as on version 2 a
valueless key was presented. The direction should be value and erspan_dir
should be the key.
Fixes: 2897636267 ("erspan: add erspan version II support")
Cc: u9012063@gmail.com
Reported-by: Christian Pössinger <christian@poessinger.com>
Signed-off-by: Christian Pössinger <christian@poessinger.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
since id is unique for nexthop, it is heavy to dump all nexthops.
use existing delete_nexthop to support flush by id
Signed-off-by: Chunmei Xu <xuchunmei@linux.alibaba.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
To avoid code duplication, tipc should be converted to use the helper
functions for working with libmnl in lib/mnl_utils.c
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David Ahern <dsahern@kernel.org>
Allow a policer action to enforce a rate-limit based on packets-per-second,
configurable using a packet-per-second rate and burst parameters.
e.g.
# $TC actions add action police pkts_rate 1000 pkts_burst 200 index 1
# $TC actions ls action police
total acts 1
action order 0: police 0x1 rate 0bit burst 0b mtu 4096Mb pkts_rate 1000 pkts_burst 200
ref 1 bind 0
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
- Open Routing is using ID 99 for it's installed routes
- https://github.com/facebook/openr
- Kernel has accepted 99 in `rtnetlink.h`
Signed-of-by: Cooper Lees <me@cooperlees.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
After the comment cited below, batch mode neglects to set the global
variable batch_mode to a non-zero value. Netns and VRF commands use this
variable, and break in batch mode. Fix by setting the value again.
Fixes: 1d9a81b8c9 ("Unify batch processing across tools")
Reported-by: Tim Rice <trice@posteo.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for setting and displaying the Traffic Flow
Confidentiality attribute for an XFRM state, which allows padding ESP
packets to a specified length.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David Ahern <dsahern@kernel.org>
The out of date documentation was removed in 2017, but the instructions
in the README were not removed.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Petr Machata says:
====================
Support for resilient next-hop groups was recently accepted to Linux
kernel[1]. Resilient next-hop groups add a layer of indirection between the
SKB hash and the next hop. Thus the hash is used to reference a hash table
bucket, which is then used to reference a particular next hop. This allows
the system more flexibility when assigning SKB hash space to next hops.
Previously, each next hop had to be assigned a continuous range of SKB hash
space. With a hash table as an intermediate layer, it is possible to
reassign next hops with a hash table bucket granularity. In turn, this
mends issues with traffic flow redirection resulting from next hop removal
or adjustments in next-hop weights.
In this patch set, introduce support for resilient next-hop groups to
iproute2.
- Patch #1 brings include/uapi/linux/nexthop.h and /rtnetlink.h up to date.
- Patches #2 and #3 add new helpers that will be useful later.
- Patch #4 extends the ip/nexthop sub-tool to accept group type as a
command line argument, and to dispatch based on the specified type.
- Patch #5 adds the support for resilient next-hop groups.
- Patch #6 adds the support for resilient next-hop group bucket interface.
To illustrate the usage, consider the following commands:
# ip nexthop add id 1 via 192.0.2.2 dev dummy1
# ip nexthop add id 2 via 192.0.2.3 dev dummy1
# ip nexthop add id 10 group 1/2 type resilient \
buckets 8 idle_timer 60 unbalanced_timer 300
The last command creates a resilient next-hop group. It will have 8
buckets, each bucket will be considered idle when no traffic hits it for at
least 60 seconds, and if the table remains out of balance for 300 seconds,
it will be forcefully brought into balance.
And this is how the next-hop group bucket interface looks:
# ip nexthop bucket show id 10
id 10 index 0 idle_time 5.59 nhid 1
id 10 index 1 idle_time 5.59 nhid 1
id 10 index 2 idle_time 8.74 nhid 2
id 10 index 3 idle_time 8.74 nhid 2
id 10 index 4 idle_time 8.74 nhid 1
id 10 index 5 idle_time 8.74 nhid 1
id 10 index 6 idle_time 8.74 nhid 1
id 10 index 7 idle_time 8.74 nhid 1
[1] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=2a0186a37700b0d5b8cc40be202a62af44f02fa2
====================
Signed-off-by: David Ahern <dsahern@kernel.org>
Add ability to dump multiple nexthop buckets and get a specific one.
Example:
# ip nexthop add id 10 group 1/2 type resilient buckets 8
# ip nexthop
id 1 via 192.0.2.2 dev dummy10 scope link
id 2 via 192.0.2.19 dev dummy20 scope link
id 10 group 1/2 type resilient buckets 8 idle_timer 120 unbalanced_timer 0 unbalanced_time 0
# ip nexthop bucket
id 10 index 0 idle_time 28.1 nhid 2
id 10 index 1 idle_time 28.1 nhid 2
id 10 index 2 idle_time 28.1 nhid 2
id 10 index 3 idle_time 28.1 nhid 2
id 10 index 4 idle_time 28.1 nhid 1
id 10 index 5 idle_time 28.1 nhid 1
id 10 index 6 idle_time 28.1 nhid 1
id 10 index 7 idle_time 28.1 nhid 1
# ip nexthop bucket show nhid 1
id 10 index 4 idle_time 53.59 nhid 1
id 10 index 5 idle_time 53.59 nhid 1
id 10 index 6 idle_time 53.59 nhid 1
id 10 index 7 idle_time 53.59 nhid 1
# ip nexthop bucket get id 10 index 5
id 10 index 5 idle_time 81 nhid 1
# ip -j -p nexthop bucket get id 10 index 5
[ {
"id": 10,
"bucket": {
"index": 5,
"idle_time": 104.89,
"nhid": 1
},
"flags": [ ]
} ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add ability to configure resilient nexthop groups and show their current
configuration. Example:
# ip nexthop add id 10 group 1/2 type resilient buckets 8
# ip nexthop show id 10
id 10 group 1/2 type resilient buckets 8 idle_timer 120 unbalanced_timer 0
# ip -j -p nexthop show id 10
[ {
"id": 10,
"group": [ {
"id": 1
},{
"id": 2
} ],
"type": "resilient",
"resilient_args": {
"buckets": 8,
"idle_timer": 120,
"unbalanced_timer": 0
},
"flags": [ ]
} ]
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Next patches are going to add a 'resilient' nexthop group type, so allow
users to specify the type using the 'type' argument. Currently, only
'mpath' type is supported.
These two commands are equivalent:
# ip nexthop add id 10 group 1/2/3
# ip nexthop add id 10 group 1/2/3 type mpath
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
NH ID extraction is a common operation, and will become more common still
with the resilient NH groups support. Add a helper that does what it
usually done and returns the parsed NH ID.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Add a helper to dump a timeval. Print by first converting to double and
then dispatching to print_color_float().
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Several functions in bpf_glue.c and bpf_libbpf.c rely on PATH_MAX, which is
normally included from <limits.h> in other iproute2 source files.
It fixes errors seen using gcc 10.2.0, binutils 2.35.1 and musl 1.1.24:
bpf_glue.c: In function 'get_libbpf_version':
bpf_glue.c:46:11: error: 'PATH_MAX' undeclared (first use in this function);
did you mean 'AF_MAX'?
46 | char buf[PATH_MAX], *s;
| ^~~~~~~~
| AF_MAX
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Security context names are not guaranteed to be NUL-terminated by the
kernel, so we can't just print them using %s directly. The length of
the string is determined by sctx->ctx_len, so we can use that to limit
what fprintf outputs.
While at it, factor that out to a separate function, since the exact
same code is used to print the security context for both policies and
states.
Fixes: b2bb289a57 ("xfrm security context support")
Reported-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The deficit returned from the kernel is signed, but was printed with a %u
specifier in the format string, leading to negative values to be printed as
high unsigned values instead. In addition, we passed a negative value to
sprint_time() even though that expects an unsigned value. Fix this by
changing the format specifier and reversing the sign of negative time
values.
Fixes: 714444c0cb ("Add support for CAKE qdisc")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In older distros we need bsd/stdlib.h but newer distro doesn't
need it. Also old distro will need libbsd-devel installed and newer
doesn't. To remove a possible dependency on libbsd-devel replace usage
of reallocarray to realloc.
dcb_app.c: In function ‘dcb_app_table_push’:
dcb_app.c:68:25: warning: implicit declaration of function ‘reallocarray’; did you mean ‘realloc’?
Fixes: 8e9bed1493 ("dcb: Add a subtool for the DCB APP object")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
format_host_rta_r might return a cached hostname
via its return value and not use the input buffer.
Before:
$ ip -resolve -6 route
dev lo proto kernel metric 256 pref medium
After:
$ ip/ip -resolve -6 route
localhost dev lo proto kernel metric 256 pref medium
Bug-Debian: https://bugs.debian.org/983591
Reported-by: Axel Scheepers <axel.scheepers76@gmail.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When user specifies either unknown flavour or unknown state during
devlink port commands, return appropriate error message.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Introduce helper for generic socket receive helper and introduce helper
to build command with custom family and version.
Use API in subsequent devlink patch.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
User helper routines provided by library for counting slash and
splitting string on delimiter.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
The feature is supported by the kernel since 5.11-net-next,
let's allow user-space to use it.
Just parse and dump an additional, per endpoint, u16 attribute
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Functions get_cgroup2_id() and get_cgroup2_path() may call close() with
a negative argument.
Avoid that making the calls conditional on the file descriptors.
get_cgroup2_path() may also return NULL leaking a file descriptor.
Ensure this does not happen using a single return point.
Fixes: d5e6ee0dac ("ss: introduce cgroup2 cache and helper functions")
Fixes: 8f1cd119b3 ("lib: fix checking of returned file handle size for cgroup")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
make_path() function calls mkdir two times in a row. The first one it
stores mkdir return code, and then it calls it again to check for errno.
This seems unnecessary, as we can use the return code from the first
call and check for errno if not 0.
Fixes: ac3415f5c1 ("lib/fs: Fix and simplify make_path()")
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As stated in commit ac3415f5c1 ("lib/fs: Fix and simplify make_path()"),
calling stat() before mkdir() is racey, because the entry might change in
between.
As the call to stat() seems to only check for target existence, we can
simply call mkdir() unconditionally and catch all errors but EEXIST.
Fixes: 95ae9a4870 ("bpf: fix mnt path when from env")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
When ip -all netns {del,exec} are called and no netns is present, ip
exit with status 0. However this does not happen if no netns has been
created since boot time: in that case, indeed, the NETNS_RUN_DIR is not
present and netns_foreach() exit with code 1.
$ ls /var/run/netns
ls: cannot access '/var/run/netns': No such file or directory
$ ip -all netns exec ip link show
$ echo $?
1
$ ip -all netns del
$ echo $?
1
$ ip netns add test
$ ip netns del test
$ ip -all netns del
$ echo $?
0
$ ls -a /var/run/netns
. ..
This leaves us in the unpleasant situation where the same command, when
no netns is present, does the same stuff (in this case, nothing), but
exit with two different statuses.
Fix this treating ENOENT in a different way from other errors, similarly
to what we already do in ipnetns.c netns_identify_pid()
Fixes: e998e118dd ("lib: Exec func on each netns")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When table and vrftable are used in SRv6, ip should bail out if table
ids are not valid, and return a proper error message to the user.
Achieve this simply checking rtnl_rttable_a2n return value, as we
already do in the rest of iproute.
Fixes: 0486388a87 ("add support for table name in SRv6 End.DT* behaviors")
Fixes: 69629b4e43 ("seg6: add support for vrftable attribute in SRv6 End.DT4/DT6 behaviors")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
sprint_time64() uses SPRINT_BSIZE-1 as a constant buffer lenght in its
implementation, however m_gate uses shorter buffers when calling it.
Fix this using SPRINT_BUF macro to get the buffer, thus getting a
SPRINT_BSIZE-long buffer.
Fixes: 07d5ee70b5 ("iproute2-next:tc:action: add a gate control action")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Talking to varios people, it became apparent that there is a certain
ambiguity in the description of these flags. They refer to egress
flooding, which should perhaps be stated more clearly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The "usually hardware" and "usually software" distinctions make no
sense, try to clarify what these do based on the actual kernel behavior.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The bridge program does:
fdb_modify:
/* Assume self */
if (!(req.ndm.ndm_flags&(NTF_SELF|NTF_MASTER)))
req.ndm.ndm_flags |= NTF_SELF;
which is clearly against the documented behavior. The only thing we can
do, sadly, is update the documentation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Explaining the "local" flag by saying that it is "a local permanent fdb
entry" is not very helpful, be more specific.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The bridge does this:
fdb_modify:
/* Assume permanent */
if (!(req.ndm.ndm_state&(NUD_PERMANENT|NUD_REACHABLE)))
req.ndm.ndm_state |= NUD_PERMANENT;
So let's make the user aware of the fact that if they don't want local
entries, they need to specify some other flag like "static".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The bridge program parses "local" and "permanent" in just the same way,
so it makes sense to tell that to users:
fdb_modify:
} else if (matches(*argv, "local") == 0 ||
matches(*argv, "permanent") == 0) {
req.ndm.ndm_state |= NUD_PERMANENT;
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The dump isn't supported for the statistics bind/unbind commands
because they operate on specific QP counters. This is different
from query commands that can operate on many objects at the same
time.
Let's check the user input and ensure that arguments are valid.
Fixes: a6d0773ebe ("rdma: Add stat manual mode support")
Signed-off-by: Ido Kalir <idok@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Andrea Claudi
Stephen Hemminger
Chunmei Xu
Hoang Le
Baowen Zheng
Cooper Lees
Petr Machata
David Ahern
Sabrina Dubroca
Ido Schimmel
Tony Ambardar
Toke Høiland-Jørgensen
Roi Dayan
Luca Boccassi
Parav Pandit
Paolo Abeni
Vladimir Oltean
Ido Kalir