Test the plain MPLS (unicast and multicast) and IP (v4 and v6) modes.
Also test the multiproto option for MPLS and for IP.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Interfaces take a 'if_id' which is an interface id which can be set on
an xfrm policy as its interface lookup key (XFRMA_IF_ID).
Signed-off-by: Matt Ellison <matt@arroyo.io>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The tunnel test leaves behind link devices created by the GRE kernel
modules:
$ ip -br link
...
gre0@NONE DOWN 0.0.0.0 <NOARP>
gretap0@NONE DOWN 00:00:00:00:00:00 <BROADCAST,MULTICAST>
erspan0@NONE DOWN 00:00:00:00:00:00 <BROADCAST,MULTICAST>
ip6tnl0@NONE DOWN :: <NOARP>
ip6gre0@NONE DOWN 00:00:00:00:
$ lsmod | grep gre
ip6_gre 40960 0
ip6_tunnel 40960 1 ip6_gre
ip_gre 32768 0
ip_tunnel 24576 1 ip_gre
gre 16384 2 ip6_gre,ip_gre
Check beforehand if the gre kernel module is loaded, and if not unload
them all at the end of the test. This should avoid causing problems if
a user is already using GRE for other purposes.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Since netlink messages are in host byte order, shipping a pre-generated
nlmsg blob won't suffice on systems with different endianness. Therefore
generate the blob at runtime, so it's content fits the hosts endianness.
Note that the generated message will contain only a single interface
featuring two VFs instead of the full list before. Yet this is
sufficient, as it triggers the crash with iproute versions prior to
commit 8c29ae7cc2 ("ip link: Fix crash on older kernels when show VF
dev").
Signed-off-by: Phil Sutter <phil@nwl.cc>
The calling of netns_map_init() before command parsing introduced
a performance issue with large number of namespaces.
As commands such as add, del and exec do not need to iterate through
/var/run/netns it would be good not no build the cache before executing
these commands.
Example:
unpatched:
time seq 1 1000 | xargs -n 1 ip netns add
real 0m16.832s
user 0m1.350s
sys 0m15.029s
patched:
time seq 1 1000 | xargs -n 1 ip netns add
real 0m3.859s
user 0m0.132s
sys 0m3.205s
Signed-off-by: Anton Aksola <aakso@iki.fi>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
On 24.11.2015 02:26, Stephen Hemminger wrote:
> On Thu, 12 Nov 2015 21:10:08 +0000
> Konstantin Shemyak <konstantin@shemyak.com> wrote:
>
>> When creating an IP tunnel over IPv6, the address family must be passed in
>> the option, e.g.
>>
>> ip -6 tunnel add mode ip6gre local 1::1 remote 2::2
>>
>> This makes it impossible to create both IPv4 and IPv6 tunnels in one batch.
>>
>> In fact the address family option is redundant here, as each tunnel mode is
>> relevant for only one address family.
>> The patch determines whether the applicable address family is AF_INET6
>> instead of the default AF_INET and makes the "-6" option unnecessary for
>> "ip tunnel add".
>>
>> Signed-off-by: Konstantin Shemyak <konstantin@shemyak.com>
>> ---
>> ip/iptunnel.c | 26 ++++++++++++++++++++++++++
>> testsuite/tests/ip/tunnel/add_tunnel.t | 14 ++++++++++++++
>> 2 files changed, 40 insertions(+)
>> create mode 100755 testsuite/tests/ip/tunnel/add_tunnel.t
>>
>> diff --git a/ip/iptunnel.c b/ip/iptunnel.c
>> index 78fa988..7826a37 100644
>> --- a/ip/iptunnel.c
>> +++ b/ip/iptunnel.c
>> @@ -629,8 +629,34 @@ static int do_6rd(int argc, char **argv)
>> return tnl_6rd_ioctl(cmd, medium, &ip6rd);
>> }
>>
>> +static int tunnel_mode_is_ipv6(char *tunnel_mode) {
>> + char *ipv6_modes[] = {
>> + "ipv6/ipv6", "ip6ip6",
>> + "vti6",
>> + "ip/ipv6", "ipv4/ipv6", "ipip6", "ip4ip6",
>> + "ip6gre", "gre/ipv6",
>> + "any/ipv6", "any"
>> + };
>> + int i;
>> +
>> + for (i = 0; i < sizeof(ipv6_modes) / sizeof(char *); i++) {
>> + if (strcmp(ipv6_modes[i], tunnel_mode) == 0)
>> + return 1;
>> + }
>> + return 0;
>> +}
>> +
>
> The ipv6_modes table should be static const.
Thank you for the note! attached the corrected patch.
> Also is it possible to use strstr for ipv6 and ip6 or even strchr(tunnel_mode, '6')
> to simplify this?
There is IPv6 tunnel mode 'any', and IPv4 tunnel mode 'ipv6/ip' (aka
'sit'). It looks to me that attempts to find some substring match
would not make the code much shorter, but definitely less readable.
Konstantin Shemyak.
>From 42d27db0055c3a114fe6eb86d680bef9ec098ad4 Mon Sep 17 00:00:00 2001
From: Konstantin Shemyak <konstantin@shemyak.com>
Date: Thu, 12 Nov 2015 20:52:02 +0200
Subject: [PATCH] Tunnel address family is determined from the tunnel mode
When the tunnel mode already tells the IP address family, "ip tunnel"
command determines it and does not require option "-4"/"-6" to be passed.
This makes possible creating both IPv4 and IPv6 tunnels in one batch.
Signed-off-by: Konstantin Shemyak <konstantin@shemyak.com>
Added possibility to check command output by grep from the testing
script.
Now TMP_OUT & TMP_ERR are passed from Makefile and changed to
STD_ERR & STD_OUT.
Also changed some existing tests to make output testing.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Added two tests which checks the following fixed issues:
1) Bug when not possible add new virtual interface via:
$ ip link add dev XXX type
It was fixed a few releases ago.
2) Crash on older kernels when VF rate info does not exist:
$ ip link show
Used dump file from William Dauchy <william@gandi.net>:
testsuite/tests/ip/link/dev_wo_vf_rate.nl
So 'ip link show' replaced by 'ip -d monitor file ...' which does
the same thing.
Also added new func in testsuite/lib/generic.sh to gen new random dev name.
Added 'clean' dependency on running all tests.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Guillaume Nault
Matt Ellison
Luca Boccassi
Petr Vorel
Phil Sutter
Anton Aksola
Konstantin Shemyak
Vadim Kochan