This patch adds support for the three IOAM encap modes that were introduced:
inline, encap and auto.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
This patch provides a new encap type for routes to insert an IOAM pre-allocated
trace:
$ ip -6 ro ad fc00::1/128 encap ioam6 trace prealloc type 0x800000 ns 1 size 12 dev eth0
where:
- "trace" and "prealloc" may appear as useless but just anticipate for future
implementations of other ioam option types.
- "type" is a bitfield (=u32) defining the IOAM pre-allocated trace type (see
the corresponding uapi).
- "ns" is an IOAM namespace ID attached to the pre-allocated trace.
- "size" is the trace pre-allocated size in bytes; must be a 4-octet multiple;
limited size (see IOAM6_TRACE_DATA_SIZE_MAX).
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David Ahern <dsahern@kernel.org>
We introduce the new "End.DT46" action for supporting the SRv6 End.DT46
Behavior in iproute2.
The SRv6 End.DT46 Behavior, defined in RFC 8986 [1] section 4.8, can be
used to implement L3 VPNs based on Segment Routing over IPv6 networks in
multi-tenants environments and it is capable of handling both IPv4 and
IPv6 tenant traffic at the same time.
The SRv6 End.DT46 Behavior decapsulates the received packets and it
performs the IPv4 or IPv6 routing lookup in the routing table of the
tenant.
As for the End.DT4 and for the End.DT6 in VRF mode, the SRv6 End.DT46
Behavior leverages a VRF device in order to force the routing lookup into
the associated routing table using the "vrftable" attribute.
To make the End.DT46 work properly, it must be guaranteed that the
routing table used for routing lookup operations is bound to one and
only one VRF during the tunnel creation. Such constraint has to be
enforced by enabling the VRF strict_mode sysctl parameter, i.e.:
$ sysctl -wq net.vrf.strict_mode=1
Note that the same approach is used for the End.DT4 Behavior and for the
End.DT6 Behavior in VRF mode.
An SRv6 End.DT46 Behavior instance can be created as follows:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT46 vrftable 100 dev vrf100
Standard Output:
$ ip -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End.DT46 vrftable 100 dev vrf100 metric 1024 pref medium
JSON Output:
$ ip -6 -j -p route show 2001:db8::1
[ {
"dst": "2001:db8::1",
"encap": "seg6local",
"action": "End.DT46",
"vrftable": 100,
"dev": "vrf100",
"metric": 1024,
"flags": [ ],
"pref": "medium"
} ]
This patch updates the route.8 man page and the ip route help with the
information related to End.DT46.
Considering that the same information was missing for the SRv6 End.DT4 and
the End.DT6 Behaviors, we have also added it.
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-enddt46-decapsulation-and-s
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Signed-off-by: David Ahern <dsahern@kernel.org>
We introduce the "count" optional attribute for supporting counters in SRv6
Behaviors as defined in [1], section 6. For each SRv6 Behavior instance,
counters defined in [1] are:
- the total number of packets that have been correctly processed;
- the total amount of traffic in bytes of all packets that have been
correctly processed;
In addition, we introduce a new counter that counts the number of packets
that have NOT been properly processed (i.e. errors) by an SRv6 Behavior
instance.
Each SRv6 Behavior instance can be configured, at the time of its creation,
to make use of counters specifing the "count" attribute as follows:
$ ip -6 route add 2001:db8::1 encap seg6local action End count dev eth0
per-behavior counters can be shown by adding "-s" to the iproute2 command
line, i.e.:
$ ip -s -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End packets 0 bytes 0 errors 0 dev eth0
[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-counters
v2:
- add help and route.8 man page updates
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Signed-off-by: David Ahern <dsahern@kernel.org>
When table and vrftable are used in SRv6, ip should bail out if table
ids are not valid, and return a proper error message to the user.
Achieve this simply checking rtnl_rttable_a2n return value, as we
already do in the rest of iproute.
Fixes: 0486388a87 ("add support for table name in SRv6 End.DT* behaviors")
Fixes: 69629b4e43 ("seg6: add support for vrftable attribute in SRv6 End.DT4/DT6 behaviors")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We introduce the "vrftable" attribute for supporting the SRv6 End.DT4 and
End.DT6 behaviors in iproute2.
The "vrftable" attribute indicates the routing table associated with
the VRF device used by SRv6 End.DT4/DT6 for routing IPv4/IPv6 packets.
The SRv6 End.DT4/DT6 is used to implement IPv4/IPv6 L3 VPNs based on Segment
Routing over IPv6 networks in multi-tenants environments.
It decapsulates the received packets and it performs the IPv4/IPv6 routing
lookup in the routing table of the tenant.
The SRv6 End.DT4/DT6 leverages a VRF device in order to force the routing
lookup into the associated routing table using the "vrftable" attribute.
Some examples:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT4 vrftable 100 dev eth0
$ ip -6 route add 2001:db8::2 encap seg6local action End.DT6 vrftable 200 dev eth0
Standard Output:
$ ip -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End.DT4 vrftable 100 dev eth0 metric 1024 pref medium
JSON Output:
$ ip -6 -j -p route show 2001:db8::2
[ {
"dst": "2001:db8::2",
"encap": "seg6local",
"action": "End.DT6",
"vrftable": 200,
"dev": "eth0",
"metric": 1024,
"flags": [ ],
"pref": "medium"
} ]
v2:
- no changes made: resubmit after pulling out this patch from the kernel
patchset.
v1:
- mixing this patch with the kernel patchset confused patckwork.
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for rpl segment routing settings.
Example:
ip -n ns0 -6 route add 2001::3 encap rpl segs \
fe80::c8fe:beef:cafe:cafe,fe80::c8fe:beef:cafe:beef dev lowpan0
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add LWTUNNEL_IP_OPTS_ERSPAN's parse and print to implement
erspan options support in iproute_lwtunnel.
Option is expressed as version:index:dir:hwid, dir and hwid will be parsed
when version is 2, while index will be parsed when version is 1. All of
these are numbers. erspan doesn't support multiple options.
With this patch, users can add and dump erspan options like:
# ip netns add a
# ip netns add b
# ip -n a link add eth0 type veth peer name eth0 netns b
# ip -n a link set eth0 up
# ip -n b link set eth0 up
# ip -n a addr add 10.1.0.1/24 dev eth0
# ip -n b addr add 10.1.0.2/24 dev eth0
# ip -n b link add erspan1 type erspan key 1 seq erspan 123 \
local 10.1.0.2 remote 10.1.0.1
# ip -n b addr add 1.1.1.1/24 dev erspan1
# ip -n b link set erspan1 up
# ip -n b route add 2.1.1.0/24 dev erspan1
# ip -n a link add erspan1 type erspan key 1 seq local 10.1.0.1 external
# ip -n a addr add 2.1.1.1/24 dev erspan1
# ip -n a link set erspan1 up
# ip -n a route add 1.1.1.0/24 encap ip id 1 \
erspan_opts 2:123:1:2 dst 10.1.0.2 dev erspan1
# ip -n a route show
# ip netns exec a ping 1.1.1.1 -c 1
1.1.1.0/24 encap ip id 1 src 0.0.0.0 dst 10.1.0.2 ttl 0 tos 0
erspan_opts 2:0:1:2 dev erspan1 scope link
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=64 time=0.124 ms
v1->v2:
- improve the changelog.
- use PRINT_ANY to support dumping with json format.
v2->v3:
- implement proper JSON object for opts instead of just bunch of strings.
v3->v4:
- keep the same format between input and output, json and non json.
- print version, index, dir and hwid as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add LWTUNNEL_IP_OPTS_VXLAN's parse and print to implement
vxlan options support in iproute_lwtunnel.
Option is expressed a number for gbp only, and vxlan doesn't support
multiple options.
With this patch, users can add and dump vxlan options like:
# ip netns add a
# ip netns add b
# ip -n a link add eth0 type veth peer name eth0 netns b
# ip -n a link set eth0 up
# ip -n b link set eth0 up
# ip -n a addr add 10.1.0.1/24 dev eth0
# ip -n b addr add 10.1.0.2/24 dev eth0
# ip -n b link add vxlan1 type vxlan id 1 local 10.1.0.2 \
remote 10.1.0.1 dev eth0 ttl 64 gbp
# ip -n b addr add 1.1.1.1/24 dev vxlan1
# ip -n b link set vxlan1 up
# ip -n b route add 2.1.1.0/24 dev vxlan1
# ip -n a link add vxlan1 type vxlan local 10.1.0.1 dev eth0 ttl 64 \
gbp external
# ip -n a addr add 2.1.1.1/24 dev vxlan1
# ip -n a link set vxlan1 up
# ip -n a route add 1.1.1.0/24 encap ip id 1 \
vxlan_opts 1110 dst 10.1.0.2 dev vxlan1
# ip -n a route show
# ip netns exec a ping 1.1.1.1 -c 1
1.1.1.0/24 encap ip id 1 src 0.0.0.0 dst 10.1.0.2 ttl 0 tos 0
vxlan_opts 1110 dev vxlan1 scope link
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=64 time=0.111 ms
v1->v2:
- improve the changelog.
- get_u32 with base = 0 for gbp.
- use PRINT_ANY to support dumping with json format.
v2->v3:
- implement proper JSON array for opts.
v3->v4:
- keep the same format between input and output, json and non json.
- print gbp as uint.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch is to add LWTUNNEL_IP(6)_OPTS and LWTUNNEL_IP_OPTS_GENEVE's
parse and print to implement geneve options support in iproute_lwtunnel.
Options are expressed as class:type:data and multiple options may be
listed using a comma delimiter, class and type are numbers and data
is a hex string.
With this patch, users can add and dump geneve options like:
# ip netns add a
# ip netns add b
# ip -n a link add eth0 type veth peer name eth0 netns b
# ip -n a link set eth0 up; ip -n b link set eth0 up
# ip -n a addr add 10.1.0.1/24 dev eth0
# ip -n b addr add 10.1.0.2/24 dev eth0
# ip -n b link add geneve1 type geneve id 1 remote 10.1.0.1 ttl 64
# ip -n b addr add 1.1.1.1/24 dev geneve1
# ip -n b link set geneve1 up
# ip -n b route add 2.1.1.0/24 dev geneve1
# ip -n a link add geneve1 type geneve external
# ip -n a addr add 2.1.1.1/24 dev geneve1
# ip -n a link set geneve1 up
# ip -n a route add 1.1.1.0/24 encap ip id 1 geneve_opts \
1:1:1212121234567890,1:1:1212121234567890,1:1:1212121234567890 \
dst 10.1.0.2 dev geneve1
# ip -n a route show
# ip netns exec a ping 1.1.1.1 -c 1
1.1.1.0/24 encap ip id 1 src 0.0.0.0 dst 10.1.0.2 ttl 0 tos 0
geneve_opts 1:1:1212121234567890,1:1:1212121234567890 ...
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=64 time=0.079 ms
v1->v2:
- improve the changelog.
- use PRINT_ANY to support dumping with json format.
v2->v3:
- implement proper JSON array for opts instead of just bunch of strings.
v3->v4:
- keep the same format between input and output, json and non json.
- print class and type as uint and print data as hex string.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
it allows to specify also the table name in addition to the table number in
SRv6 End.DT* behaviors.
To add an End.DT6 behavior route specifying the table by name:
$ ip -6 route add 2001:db8::1 encap seg6local action End.DT6 table main dev eth0
The ip route show to print output this route:
$ ip -6 route show 2001:db8::1
2001:db8::1 encap seg6local action End.DT6 table main dev eth0 metric 1024 pref medium
The JSON output:
$ ip -6 -j -p route show 2001:db8::1
[ {
"dst": "2001:db8::1",
"encap": "seg6local",
"action": "End.DT6",
"table": "main",
"dev": "eth0",
"metric": 1024,
"flags": [ ],
"pref": "medium"
} ]
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@cnit.it>
Signed-off-by: David Ahern <dsahern@gmail.com>
lwt_parse_encap currently assumes the encap attribute is RTA_ENCAP
and the type is RTA_ENCAP_TYPE. Change lwt_parse_encap to take these
as input arguments for reuse by nexthop code which has the attributes
as NHA_ENCAP and NHA_ENCAP_TYPE.
Signed-off-by: David Ahern <dsahern@gmail.com>
ip l add dev tun type gretap external
ip r a 10.0.0.1 encap ip dst 192.168.152.171 id 1000 dev gretap
For gretap example when the command set the id but don't set the
TUNNEL_KEY flags. There is no key field in the send packet
User can set flags with key, csum, seq
ip r a 10.0.0.1 encap ip dst 192.168.152.171 id 1000 key csum dev gretap
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The argument to print_0xhex is converted to unsigned long long
so the format string give for normal printout has to be some
variant of %llx. Otherwise, bogus values will be printed on
32 bit platforms.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When parsing nexthop parameters, a buffer of 4k bytes is provided. Yet,
in lwt_parse_encap() and some functions called by it, buffer size was
assumed to be 1k despite the actual size was provided. This led to
spurious buffer size errors if the buffer was filled by previous nexthop
parameters to exceed that 1k boundary.
Fixes: 1e5293056a ("lwtunnel: Add encapsulation support to ip route")
Fixes: 5866bddd9a ("ila: Add support for ILA lwtunnels")
Fixes: ed67f83806 ("ila: Support for checksum neutral translation")
Fixes: 86905c8f05 ("ila: support for configuring identifier and hook types")
Fixes: b15f440e78 ("lwt: BPF support for LWT")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This is simpler and cleaner, and avoids having to include the header
from every file where the functions are used. The prototypes of the
internal implementation are in this header, so utils.h will have to be
included anyway for those.
Fixes: 508f3c231e ("Use libbsd for strlcpy if available")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If libc does not provide strlcpy check for libbsd with pkg-config to
avoid relying on inline version.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In case caller did not specify 'segs' parameter, parse_srh() would read
garbage while iterating over 'segbuf'. Avoid this by initializing
'segbuf' to an empty string.
Fixes: e8493916a8 ("iproute: add support for SR-IPv6 lwtunnel encapsulation")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If call to rta_addattr_l() failed, parse_encap_seg6() would leak memory.
Fix this by making sure calls to free() are not skipped.
Fixes: bd59e5b151 ("ip-route: Fix segfault with many nexthops")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Conflicts:
ip/iproute_lwtunnel.c
In addition to merge conflict between bd59e5b151 and 94a8722f2f,
updated the code added by the latter commit based on the change of the
former (ie., added ret = to the new rta_addattr_l).
Signed-off-by: David Ahern <dsahern@gmail.com>
It was possible to crash ip-route by adding an IPv6 route with 37
nexthop statements. A simple reproducer is:
| for i in `seq 37`; do
| nhs="nexthop via 1111::$i "$nhs
| done
| ip -6 route add 3333::/64 $nhs
The related code was broken in multiple ways:
* parse_one_nh() assumed that rta points to 4kB of storage but caller
provided just 1kB. Fixed by passing 'len' parameter with the correct
value.
* Error checking of rta_addattr*() calls in parse_one_nh() and called
functions was completely absent, so with above fix in place output
flood would occur due to parser looping forever.
While being at it, increase message buffer sizes to 4k. This allows for
at most 144 nexthops.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This allows the user to specify the LWTUNNEL_IP_SRC/LWTUNNEL_IP6_SRC
when setting an lwtunnel encapsulation route.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for the End.BPF action of the seg6local
lightweight tunnel. Functions from the BPF lightweight tunnel are
re-used in this patch. Example:
$ ip -6 route add fc00::18 encap seg6local action End.BPF endpoint
obj my_bpf.o sec my_func dev eth0
$ ip -6 route show fc00::18
fc00::18 encap seg6local action End.BPF endpoint my_bpf.o:[my_func]
dev eth0 metric 1024 pref medium
v2: - re-use of print_encap_bpf_prog instead of fprintf
- introduction of "endpoint" keyword for more consistency with
others parameters
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_uint() will silently promote its variable type to uint64_t, but there
is nothing that ensures that the format string specifier passed along with
it fits (and the function name suggest to pass "%u").
Fix this by changing print_uint() to use a native 'unsigned int' type, and
introduce a separate print_u64() function for printing 64-bit values. All
call sites that were actually printing 64-bit values using print_uint() are
converted to use print_u64() instead.
Since print_int() was already using native int types, just add a
print_s64() to match, but don't convert any call sites. For symmetry,
also add a print_luint() method (with no users).
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Add JSON and color output formatting to ip route command.
Similar to existing address and link output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Having iplink_parse() and @struct iplink_req in include/utils.h does not
reflect it's IP nature: move to ip/ip_common.h.
Move contents of ip/iplink_xdp.h and ip/iproute_lwtunnel.h to
ip/ip_common.h since they are small (i.e. only two function prototypes):
ip/iplink_bridge.c and ip/iplink_vrf.c prototypes already there.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
While benefit from using ll_name_to_index() with populated
cache can potentially be exploited only in few places
(e.g. bridge fdb/mdb/vlan show routines) there is another
advantage of ll_name_to_index() over plain if_nametoindex():
in case of if_nametoindex() failure ll_name_to_index()
will attempt to get index from common name in form "if%d"
that may be returned from ll_index_to_name().
This makes output from ip(8) coherent with it's input.
Note that most of the code already switched from plain
if_nametoindex() to ll_name_to_index() to cached variant.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Both geneve and vxlan modules are converted to
use get_addr() we can replace inet_get_addr()
in less problematic places and finally get
rid of inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both ttl/hoplimit is from 1 to 255. Zero has special meaning:
use encapsulated packet value. In ip-link(8) -d output this
looks like "ttl/hoplimit inherit". In JSON we have "int" type
for ttl and therefore values from 0 (inherit) to 255.
To do the best in handling ttl/hoplimit we need to accept
both cases: missing attribute in netlink dump and zero value
for "inherit"ed case. Last one is broken since JSON output
introduction for gre/iptnl versions and was never true for
gre6/ip6tnl.
For all tunnels, except ip6tnl change JSON type from "int" to
"uint" to reflect true nature of the ttl.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There are two reasons for switching to cached variant:
1) ll_index_to_name() may return result from cache,
eliminating expensive ioctl() to the kernel.
Note that most of the code already switched from plain
if_indextoname() to ll_index_to_name() to cached variant
in print path because in most cases cache populated.
2) It always return name in the form "if%d", even if
entry is not in cache and ioctl() fails. This drops
"link_index" from JSON output.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
bpf_parse_common() parses and loads the program. Rename it
accordingly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Program type is needed both for parsing and loading of
the program. Parsing may also induce the type based on
signatures from __bpf_prog_meta. Instead of passing
the type around keep it in struct bpf_cfg_in.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Expose identifier type and hook types in ILA configuraiton
and reporting. This adds support in both ip ila ILA LWT.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Configuration support in both ip ila and ip LWT for checksum
neutral-map-auto. This is a mode of ILA where checksum
neutral mapping is assumed for packets (there is no C-bit
in the identifier to indicate checksum neutral).
Signed-off-by: Tom Herbert <tom@quantonium.net>
This patch adds support for the L2ENCAP seg6 mode, enabling to encapsulate
L2 frames within SRv6 packets.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
ila_csum_name2mode() returning -1 on error but being declared as
returning __u8 doesn't make much sense. Change the code to correctly
detect this issue. Checking for __u8 overruns shouldn't be necessary
though since ila_csum_name2mode() return values are well-defined.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This patch adds support for the seg6local lightweight tunnel
("ip route add ... encap seg6local ...").
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
If a header that includes linux/in6.h is included before
iproute's utils.h, then iproute2 fails to compile on older
glibc versions.
Fixes: e8493916a8 ("iproute: add support for SR-IPv6 lwtunnel encapsulation")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Add support for setting and displaying the ttl attribute
for MPLS IP lighweight tunnels.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Use the new helper functions rta_getattr_u* instead of direct
cast of RTA_DATA(). Where RTA_DATA() is a structure, then remove
the unnecessary cast since RTA_DATA() is void *
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Justin Iurman
Paolo Lungaroni
Andrea Claudi
Paolo Lungaroni
Alexander Aring
Xin Long
David Ahern
wenxu
Stephen Hemminger
Phil Sutter
Luca Boccassi
Shmulik Ladkani
Mathieu Xhonneux
Toke Høiland-Jørgensen
Serhey Popovych
Jakub Kicinski
Tom Herbert
David Lebrun
Robert Shearman