ip l add dev tun type gretap external
ip r a 10.0.0.1 encap ip dst 192.168.152.171 id 1000 dev gretap
For gretap Key example when the command set the id but don't set the
TUNNEL_KEY flags. There is no key field in the send packet
In the lwtunnel situation, some TUNNEL_FLAGS should can be set by
userspace
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
NETLINK_DUMP_STRICT_CHK can be used for all GET requests,
dumps as well as doit handlers. Replace the DUMP in the
name with GET make that clearer.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
While most distributions long ago switched to the iproute2 suite
of utilities, which allow class-e (240.0.0.0/4) address assignment,
distributions relying on busybox, toybox and other forms of
ifconfig cannot assign class-e addresses without this kernel patch.
While CIDR has been obsolete for 2 decades, and a survey of all the
open source code in the world shows the IN_whatever macros are also
obsolete... rather than obsolete CIDR from this ioctl entirely, this
patch merely enables class-e assignment, sanely.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Update kernel headers to commit
055722716c39 ("tipc: fix uninitialized value for broadcast retransmission")
Signed-off-by: David Ahern <dsahern@gmail.com>
DECnet belongs in the history museum of dead protocols along
with Appletalk and IPX.
Linux support has outlived its natural life and the time has
come to remove it from iproute2. Dead code is a source
of bugs and exploits.
If anyone actually has DECnet running on some old distribution
they can just keep to the old version of iproute2.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
IPX has been depracted then removed from upstream kernels.
Drop support from ip route as well.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
rntl_talk_extack and parse_rtattr_index not used in current code.
rtnl_dump_filter_l is only used in this file.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow to set the DF bit behaviour for outgoing IPv4 packets: it can be
always on, inherited from the inner header, or, by default, always off,
which is the current behaviour.
v2:
- Indicate in the man page what DF refers to, using RFC 791 wording
(David Ahern)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Allow to set the DF bit behaviour for outgoing IPv4 packets: it can be
always on, inherited from the inner header, or, by default, always off,
which is the current behaviour.
v2:
- Indicate in the man page what DF refers to, using RFC 791 wording
(David Ahern)
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This is simpler and cleaner, and avoids having to include the header
from every file where the functions are used. The prototypes of the
internal implementation are in this header, so utils.h will have to be
included anyway for those.
Fixes: 508f3c231e ("Use libbsd for strlcpy if available")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
q_{etf,taprio}.c uses CLOCK_TAI, which isn't exposed by glibc < 2.21 or
uClibc, breaking the build. Provide a fallback definition like it is done
for IPPROTO_MPLS and others.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No function, filter, or print function uses the sockaddr_nl arg,
so just drop it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Introduce snmp header file. It will be used in subsequent patch in
order to parse device statistics reported in
IFLA_INET6_STATS/IFLA_INET6_ICMP6STATS netlink attributes
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Stephen converted macsec's sci to use 0xhex, but 0xhex handles
unsigned int's, not 64 bits ints. Thus, the output of the "ip macsec
show" command is mangled, with half of the SCI replaced with 0s:
# ip macsec show
11: macsec0: [...]
cipher suite: GCM-AES-128, using ICV length 16
TXSC: 0000000001560001 on SA 0
# ip -d link show macsec0
11: macsec0@ens3: [...]
link/ether 52:54:00:12:01:56 brd ff:ff:ff:ff:ff:ff promiscuity 0
macsec sci 5254001201560001 [...]
where TXSC and sci should match.
Fixes: c0b904de62 ("macsec: support JSON")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This function retrieves a signed 32-bit integer from a netlink message
and returns it.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This allows signed 64-bit integers to be retrieved from a netlink
message.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add this helper to read signed 64-bit integers from a string.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
rtnl_wilddump_stats_req_filter only takes RTM_GETSTATS as the type argument
so rename to rtnl_statsdump_req_filter for consistency with other request
functions and hardcode the type argument.
Signed-off-by: David Ahern <dsahern@gmail.com>
Rename rtnl_wilddump_req_filter to rtnl_linkdump_req_filter,
rtnl_wilddump_request to rtnl_linkdump_req and
rtnl_wilddump_req_filter_fn to rtnl_linkdump_req_filter_fn.
In all cases drop the type argument which at this point is only
RTM_GETLINK and hardcode in the functions.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_nsiddump_req for namespace id dumps using the proper rtgenmsg
as the header. Convert existing RTM_GETNSID dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_neightbldump_req for neighbor table dumps using the proper ndtmsg
as the header. Convert existing RTM_GETNEIGHTBL dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_neighdump_req for neighbor dumps using the proper ndmsg
as the header. Convert existing rtnl_wilddump_request for RTM_GETNEIGH
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_ruledump_req for fib fule dumps using the proper fib_rule_hdr
as the header. Convert existing RTM_GETRULE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_netconfdump_req for netconf dumps using the proper netconfmsg
as the header. Convert existing RTM_GETNETCONF dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_mdbdump_req for mdb dumps using the proper br_port_msg as
the header. Convert existing RTM_GETMDB dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrlbldump_req for address label dumps using the proper
ifaddrlblmsg as the header. Convert existing RTM_GETADDRALBEL dumps
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_routedump_req for route dumps using the proper rtmsg
as the header. Convert existing RTM_GETROUTE dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add rtnl_addrdump_req for address dumps using the proper ifaddrmsg
as the header. Convert existing RTM_GETADDR dumps to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Conflicts:
ip/iproute_lwtunnel.c
In addition to merge conflict between bd59e5b151 and 94a8722f2f,
updated the code added by the latter commit based on the change of the
former (ie., added ret = to the new rta_addattr_l).
Signed-off-by: David Ahern <dsahern@gmail.com>
Common pattern in iproute commands is to print a line seperator
in non-json mode. Make that a simple function.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Using a 32 bit field to represent time in nanoseconds results in a
maximum value of about 4.3 seconds, which is well below many observed
delays in WiFi and LTE, and barely in the ballpark for a trip past the
Earth's moon, Luna.
Using 64 bit time fields in nanoseconds allows us to simulate
network diameters of several hundred light-years. However, only
conversions to and from ns, us, ms, and seconds are provided.
The iproute2 64 bit api uses signed values for time. Being able to
represent positive or negative time allows us to calculate +/- deltas
between, for example, the CLOCK_TAI and CLOCK_REALTIME clocks.
Time related utility functions in tc_util.c are moved to lib/utils.c.
Signed-off-by: Yousuk Seung <ysseung@google.com>
Signed-off-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
These are primarily fixes for "string is not string literal" warnings
/ errors (with -Werror -Wformat-nonliteral). This should be a no-op
change. I had to replace couple of print helper functions with the
code they call as it was becoming harder to eliminate these warnings,
however these helpers were used only at couple of places, so no
major change as such.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
As suggested, turn return code into true/false although it's not checked
anywhere yet.
Fixes: 4d82962ccc ("Merge common code for conditionally colored output")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Allow for -color={never,auto,always} to have colored output disabled,
enabled only if stdout is a terminal or enabled regardless of stdout
state.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Instead of calling enable_color() conditionally with identical check in
three places, introduce check_enable_color() which does it in one place.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement loading of .BTF section from object file and build up
internal table for retrieving key/value id related to maps in
the BPF program. Latter is done by setting up struct btf_type
table.
One of the issues is that there's a disconnect between the data
types used in the map and struct bpf_elf_map, meaning the underlying
types are unknown from the map description. One way to overcome
this is to add a annotation such that the loader will recognize
the relation to both. BPF_ANNOTATE_KV_PAIR(map_foo, struct key,
struct val); has been added to the API that programs can use.
The loader will then pick the corresponding key/value type ids and
attach it to the maps for creation. This can later on be dumped via
bpftool for introspection.
Example with test_xdp_noinline.o from kernel selftests:
[...]
struct ctl_value {
union {
__u64 value;
__u32 ifindex;
__u8 mac[6];
};
};
struct bpf_map_def __attribute__ ((section("maps"), used)) ctl_array = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(__u32),
.value_size = sizeof(struct ctl_value),
.max_entries = 16,
.map_flags = 0,
};
BPF_ANNOTATE_KV_PAIR(ctl_array, __u32, struct ctl_value);
[...]
Above could also further be wrapped in a macro. Compiling through LLVM and
converting to BTF:
# llc --version
LLVM (http://llvm.org/):
LLVM version 7.0.0svn
Optimized build.
Default target: x86_64-unknown-linux-gnu
Host CPU: skylake
Registered Targets:
bpf - BPF (host endian)
bpfeb - BPF (big endian)
bpfel - BPF (little endian)
[...]
# clang [...] -O2 -target bpf -g -emit-llvm -c test_xdp_noinline.c -o - |
llc -march=bpf -mcpu=probe -mattr=dwarfris -filetype=obj -o test_xdp_noinline.o
# pahole -J test_xdp_noinline.o
Checking pahole dump of BPF object file:
# file test_xdp_noinline.o
test_xdp_noinline.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), with debug_info, not stripped
# pahole test_xdp_noinline.o
[...]
struct ctl_value {
union {
__u64 value; /* 0 8 */
__u32 ifindex; /* 0 4 */
__u8 mac[0]; /* 0 0 */
}; /* 0 8 */
/* size: 8, cachelines: 1, members: 1 */
/* last cacheline: 8 bytes */
};
Now loading into kernel and dumping the map via bpftool:
# ip -force link set dev lo xdp obj test_xdp_noinline.o sec xdp-test
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 xdpgeneric/id:227 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
[...]
# bpftool prog show id 227
227: xdp tag a85e060c275c5616 gpl
loaded_at 2018-07-17T14:41:29+0000 uid 0
xlated 8152B not jited memlock 12288B map_ids 381,385,386,382,384,383
# bpftool map dump id 386
[{
"key": 0,
"value": {
"": {
"value": 0,
"ifindex": 0,
"mac": []
}
}
},{
"key": 1,
"value": {
"": {
"value": 0,
"ifindex": 0,
"mac": []
}
}
},{
[...]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Import btf.h from kernel headers at commit
2aa4a3378ad0 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
which is the last sync point.
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently NETNS_RUN_DIR is hardcoded and refers to /var/run/netns.
However, some systems (e.g. Android) doesn't have /var
which results in error attempts to create network namespaces on these
systems. This change makes NETNS_RUN_DIR configurable at build time
by allowing to pass environment variable to make command.
Also, this change makes /etc/netns directory configurable through
NETNS_ETC_DIR environment variable.
For example: ./configure && NETNS_RUN_DIR=/mnt/vendor/netns make
Tested: verified that iproute2 with configuration mentioned above
creates namespaces in /mnt/vendor/netns
Signed-off-by: Pavel Maltsev <pavelm@google.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
print_uint() will silently promote its variable type to uint64_t, but there
is nothing that ensures that the format string specifier passed along with
it fits (and the function name suggest to pass "%u").
Fix this by changing print_uint() to use a native 'unsigned int' type, and
introduce a separate print_u64() function for printing 64-bit values. All
call sites that were actually printing 64-bit values using print_uint() are
converted to use print_u64() instead.
Since print_int() was already using native int types, just add a
print_s64() to match, but don't convert any call sites. For symmetry,
also add a print_luint() method (with no users).
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Part of upstream commit
4bbb3e0e8239 ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
ip vrf exec requires root or CAP_NET_ADMIN, CAP_SYS_ADMIN and
CAP_DAC_OVERRIDE. It is not possible to run unprivileged commands like
ping as non-root or non-cap-enabled due to this requirement.
To allow users and administrators to safely add the required
capabilities to the binary, drop all capabilities on start if not
invoked with "vrf exec".
Update the manpage with the requirements.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In iproute2 package, the updates of UAPIs files are performed
after the needed feature lands in kernel's net-next tree.
Such development flow created delays to the rdma tool developers,
who uses rdma-next tree as a basis for their work.
Move RDMA UAPI file to be under rdma/ folder, so whole responsibility
of syncing this file will be on them.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Conflicts:
bridge/mdb.c
Updated bridge/bridge.c per removal of check_if_color_enabled by commit
1ca4341d2c ("color: disable color when json output is requested")
Signed-off-by: David Ahern <dsahern@gmail.com>
There is a couple of places where we report error in case of no network
device is found. In all of them we output message in the same format to
stderr and either return -1 or 1 to the caller or exit with -1.
Introduce new helper function nodev() that takes name of the network
device caused error and returns -1 to it's caller. Either call exit()
or return to the caller to preserve behaviour before change.
Use -nodev() in traffic control (tc) code to return 1.
Simplify expression for checking for argument being 0/NULL in @if
statement.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Add support for devlink resource abstraction. The resources are
represented by a tree based structure and are identified by a name and
a size. Some resources can present their real time occupancy.
First the resources exposed by the driver can be observed, for example:
$devlink resource show pci/0000:03:00.0
pci/0000:03:00.0:
name kvd size 245760 unit entry
resources:
name linear size 98304 occ 0 unit entry size_min 0 size_max 147456 size_gran 128
name hash_double size 60416 unit entry size_min 32768 size_max 180224 size_gran 128
name hash_single size 87040 unit entry size_min 65536 size_max 212992 size_gran 128
Some resource's size can be changed. Examples:
$devlink resource set pci/0000:03:00.0 path /kvd/hash_single size 73088
$devlink resource set pci/0000:03:00.0 path /kvd/hash_double size 74368
The changes do not apply immediately, this can be validate by the 'size_new'
attribute, which represents the pending changed size. For example
$devlink resource show pci/0000:03:00.0
pci/0000:03:00.0:
name kvd size 245760 unit entry size_valid false
resources:
name linear size 98304 size_new 147456 occ 0 unit entry size_min 0 size_max 147456 size_gran 128
name hash_double size 60416 unit entry size_min 32768 size_max 180224 size_gran 128
name hash_single size 87040 unit entry size_min 65536 size_max 212992 size_gran 128
In case of a pending change the nested resources present an indication
for a valid configuration of its children (sum of its children sizes
doesn't exceed the parent's size).
In order for the changes to take place hot reload is needed. The hot
reload through devlink will be introduced in the following patch.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Instead of declaring -color and -json exclusive, ignore -color when
-json is provided. The rationale is to allow to put -color in an alias
for ip while still being able to use -json. -color is merely a
presentation suggestion and we can assume there is nothing to color in
the JSON output.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Even in brief mode the interface name should be printed
in color if desired. This makes output consistent across
regular and brief mode.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
There is at least three places implementing same things: two in
ipaddress.c print_linkinfo() & print_linkinfo_brief() and one in
bridge/link.c.
They are diverge from each other very little: bridge/link.c does not
support JSON output at the moment and print_linkinfo_brief() does not
handle IFLA_LINK_NETNS case.
Introduce and use print_name_and_link() routine to handle name@link
output in all possible variations; respect IFLA_LINK_NETNS attribute to
handle case when link is in different namespace; use ll_idx_n2a() for
interface name instead of "<nil>" to share logic with other code (e.g.
ll_name_to_index() and ll_index_to_name()) supporting such template.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Be consistent in handling of IFLA_IFNAME attribute in all places: if
there is no attribute report bug to stderr and use ll_idx_n2a() as
last measure to get name in "if%u" format instead of "<nil>".
Use check_ifname() to validate network device name: this catches both
unexpected return from kernel and ll_idx_n2a().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Now all users of ll_idx_n2a() replaced with ll_index_to_name() we can
move it's functionality to ll_index_to_name() and implement index to
name conversion using snprintf() and "if%u".
Use %u specifier in "if%..." template consistently: network device
indexes are always greather than zero.
Also introduce ll_idx_n2a() conterpart: ll_idx_a2n() that is used
to translate name of the "if%u" form to index using sscanf().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
After commit a233caa0aa ("json: make pretty printing optional") I get
following build failure:
LINK rtmon
../lib/libutil.a(json_print.o): In function `new_json_obj':
json_print.c:(.text+0x35): undefined reference to `show_pretty'
collect2: error: ld returned 1 exit status
make[1]: *** [rtmon] Error 1
make: *** [all] Error 2
It is caused by missing show_pretty variable in rtmon.
On the other hand tc/tc.c there are two distinct variables and single
matches() call that handles -pretty option thus setting show_pretty
will never happen. Note that since commit 44dcfe8201 ("Change
formatting of u32 back to default") show_pretty is used in tc/f_u32.c
so this is first place where -pretty introduced.
Furthermore other utilities like misc/ifstat.c and misc/nstat.c define
pretty variable, however only for their own purposes. They both support
JSON output and thus depend show_pretty in new_json_obj().
Assuming above use common variable to represent -pretty option, define
it in utils.c and declare in utils.h that is commonly used. Replace
show_pretty with pretty.
Fixes: a233caa0aa ("json: make pretty printing optional")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Initializing @inet_prefix using C initializers or memset() seems
inefficient and unnecessary: only small part of ->data[] field will be
used to store address corresponding to ->family.
Instead initialize ->flags with zero and assume no other fields accessed
before checking corresponding bits in ->flags. For example special
helpers (e.g. is_addrtype_*()) can be used to ensure that @inet_prefix
contains valid ip or ipv6 address.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add JSON and color output formatting to ip route command.
Similar to existing address and link output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Since JSON is intended for programmatic consumption, it makes
sense for the default output format to be concise as possible.
For programmer and other uses, it is helpful to keep the pretty
whitespace format; therefore enable it with -p flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Ahern <dsahern@gmail.com>
Assume all statistics in ip(8) represented either by IFLA_STATS64 or
IFLA_STATS is 64 bit. It is clean that we can store __u32 counters of
@struct rtnl_link_stats in __u64 counters in @struct rtnl_link_stats64.
New get_rtnl_link_stats_rta() follows __print_link_stats() behaviour on
handling of stats attribute: copy no more than size of data structure
and no less than attribute length zeroing rest.
Drop print_link_stats32() as it's functionality can be handled by 64bit
variant. Move code from __print_link_stats() to print_link_stats64() and
finally rename print_link_stats64() to __print_link_stats().
More users of introduced function will come in future.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Having iplink_parse() and @struct iplink_req in include/utils.h does not
reflect it's IP nature: move to ip/ip_common.h.
Move contents of ip/iplink_xdp.h and ip/iproute_lwtunnel.h to
ip/ip_common.h since they are small (i.e. only two function prototypes):
ip/iplink_bridge.c and ip/iplink_vrf.c prototypes already there.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Make JSON output work with RED Qdiscs. Float/double printing
helpers have to be added/uncommented to print the probability.
Since TC stats in general are not split out to a separate object
the xstats printed by this patch are not separated either.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
First is used to get address from netlink attribute to
inet_prefix data structure. Use memcpy() with constant
value to let complier optimize by replacing a call by
inlining load/store instructions.
Second is used to match address in given netlink attribute
with one given as reference. It matches successfully if
no attribute is given (@rta is NULL), reference address
family is AF_UNSPEC or it's length isn't given; fails if
get_attr_rta() can't get attribute or it's family does
not match reference; calls inet_addr_match() to get final
verdict.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Both geneve and vxlan modules are converted to
use get_addr() we can replace inet_get_addr()
in less problematic places and finally get
rid of inet_get_addr().
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
It looks very useful to receive additional information
from get_addr_1() and get_addr() about address to simplify
caller and get rid of code duplications.
For now following information can be returned:
1) address is unspecified (zero)
2) address is multicast
3) address is internet: family is either AF_INET or
AF_INET6.
More information can be added in the future.
Introduce inline helpers to make code using this new
address classification interface more self explaining:
bool is_addrtype_inet(inet_prefix *addr)
true if @addr is inet address
bool is_addrtype_inet_unspec(inet_prefix *addr)
true if @addr is unspecified inet address
bool is_addrtype_inet_multi(inet_prefix *addr)
true if @addr is multicast inet address
bool is_addrtype_inet_not_unspec(inet_prefix *addr)
true if @addr is not unspecified inet address
false if @addr is not inet or unspecified inet
bool is_addrtype_inet_not_multi(inet_prefix *addr)
true if @addr is not multicast inet address
false if @addr is not inet or multicast inet
Last two are useful for case when we need inet address
that is not unspecified or multicast.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
rtnl_talk can only send a single message to kernel. Add a new function
rtnl_talk_iov that can send multiple messages to kernel.
rtnl_talk_iov takes struct iovec * and iovlen as arguments.
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Incorporate upstream changes to fix compliation with MUSL.
See commit 6926e041a892
("uapi/if_ether.h: prevent redefinition of struct ethhdr")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
From upstream kernel commit f19397a5c65665d66e3866b42056f1f58b7a366b
bpf: Add access to snd_cwnd and others in sock_ops
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
For BPF offload we need to specify the ifindex when program is
loaded now. Extend the bpf common code to accommodate that.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Expose bpf_parse_common() and bpf_load_common() functions
for those users who may want to modify the parameters to
load after parsing is done.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_parse_common() parses and loads the program. Rename it
accordingly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Parsing command line is currently done together with potentially
loading a new eBPF program. This makes it more difficult to
provide additional parameters for loading (which may come after
the eBPF program info on the command line).
Split the two (only internally for now). Verbose parameter
has to be saved in struct bpf_cfg_in to be carried between
the stages.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
struct bpf_cfg_in already carries a pointer to sock_filter ops.
It's currently set to a local variable in bpf_parse_opt_tbl(),
shared between parsing and loading stages. Move the array
entirely to struct bpf_cfg_in, this will allow us to split
parsing and loading.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_parse() will parse command line arguments to find out the
program mode. This mode will later be needed at loading time.
Instead of keeping it locally add it to struct bpf_cfg_in,
this will allow splitting parsing and loading stages.
enum bpf_mode has to be moved to the header file, because C
doesn't allow forward declaration of enums.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Program type is needed both for parsing and loading of
the program. Parsing may also induce the type based on
signatures from __bpf_prog_meta. Instead of passing
the type around keep it in struct bpf_cfg_in.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
For all files in iproute2 which do not have an obvious license
identification, mark them with SPDK GPL-2
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adapts the tc command line interface to allow bandwidth limits
to be specified as a percentage of the interface's capacity.
Adding this functionality requires passing the specified device string to
each class/qdisc which changes the prototype for a couple of functions: the
.parse_qopt and .parse_copt interfaces. The device string is a required
parameter for tc-qdisc and tc-class, and when not specified, the kernel
returns ENODEV. In this patch, if the user tries to specify a bandwidth
percentage without naming the device, we return an error from userspace.
Signed-off-by: Nishanth Devarajan<ndev2021@gmail.com>
1. Put the declarations of strlcpy and strlcat inside
an #ifdef NEED_STRLCPY. Their declarations were already in a
similar #ifdef.
2. In bpf_scm.h, include sys/un.h for struct sockaddr_un.
3. In utils.h, include time.h for struct timeval.
Tested: builds on ubuntu 14.04 with "make clean distclean; ./configure && make -j64"
Tested: 4.14.1 builds on Android with Android-specific #ifndefs for missing library code
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
This is an update for 460c03f3f3 ("iplink: double the buffer size also in
iplink_get()"). After update, we will not need to double the buffer size
every time when VFs number increased.
With call like rtnl_talk(&rth, &req.n, NULL, 0), we can simply remove the
length parameter.
With call like rtnl_talk(&rth, nlh, nlh, sizeof(req), I add a new variable
answer to avoid overwrite data in nlh, because it may has more info after
nlh. also this will avoid nlh buffer not enough issue.
We need to free answer after using.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Commit 959f1428 ("color: add new COLOR_NONE and disable_color function")
introducing color enum COLOR_NONE, which is not only duplicite of
COLOR_CLEAR, but also caused segfault, when running ip with --color
switch, as 'attr + 8' in color_fprintf() access array item out of
bounds. Thus removing it and restoring "magic" offset + 7.
Reproduce with:
$ ip -c a
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Commit d0e72011 ("ip: ipaddress.c: add support for json output")
introduced passing -1 as enum color_attr. This is not only wrong as no
color_attr has value -1, but also causes another segfault in color_fprintf()
on this setup as there is no item with index -1 in array of enum attr_colors[].
Using COLOR_CLEAR is valid option.
Reproduce with:
$ COLORFGBG='0;15' ip -c a
NOTE: COLORFGBG is environmental variable used for defining whether user
has light or dark background.
COLORFGBG="0;15" is used to ask for color set suitable for light background,
COLORFGBG="15;0" is used to ask for color set suitable for dark background.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Keep it as simple as possible for now: just escape anything that is not
isprint-able, is among the "escape" parameter or '\' as an octal escape
sequence. This should be pretty easy to extend if any other user needs
something more complex in the future.
Signed-off-by: Ivan Delalande <colona@arista.com>
iproute2 contains a bunch of kernel headers, including uapi ones.
Android's libc uses uapi headers almost directly, and uses a
script to fix kernel types that don't match what userspace
expects.
For example: https://issuetracker.google.com/36987220 reports
that our struct ip_mreq_source contains "__be32 imr_multiaddr"
rather than "struct in_addr imr_multiaddr". The script addresses
this by replacing the uapi struct definition with a #include
<bits/ip_mreq.h> which contains the traditional userspace
definition.
Unfortunately, when we compile iproute2, this definition
conflicts with the one in iproute2's linux/in.h.
Historically we've just solved this problem by running "git rm"
on all the iproute2 include/linux headers that break Android's
libc. However, deleting the files in this way makes it harder to
keep up with upstream, because every upstream change to
an include file causes a merge conflict with the delete.
This patch fixes the problem by moving the iproute2 linux headers
from include/linux to include/uapi/linux.
Tested: compiles on ubuntu trusty (glibc)
Signed-off-by: Elliott Hughes <enh@google.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
The original problem was that something like:
| strncpy(ifr.ifr_name, *argv, IFNAMSIZ);
might leave ifr.ifr_name unterminated if length of *argv exceeds
IFNAMSIZ. In order to fix this, I thought about replacing all those
cases with (equivalent) calls to snprintf() or even introducing
strlcpy(). But as Ulrich Drepper correctly pointed out when rejecting
the latter from being added to glibc, truncating a string without
notifying the user is not to be considered good practice. So let's
excercise what he suggested and reject empty, overlong or otherwise
invalid interface names right from the start - this way calls to
strncpy() like shown above become safe and the user has a chance to
reconsider what he was trying to do.
Note that this doesn't add calls to check_ifname() to all places where
user supplied interface name is parsed. In many cases, the interface
must exist already and is therefore looked up using ll_name_to_index(),
so if_nametoindex() will perform the necessary checks already.
Signed-off-by: Phil Sutter <phil@nwl.cc>
As Stephen Hemminger mentioned on the last submission the new_json_obj
function is always called with fp == stdout, so right now, there's no
need of this extra argument.
The background for the rework is the following:
The ip monitor didn't call `new_json_obj` (even for in non json context),
so the static FILE* _fp variable wasn't initialized, thus raising a
SIGSEGV in ipaddress.c. This patch should fix this issue for good, new
paths won't have to call `new_json_obj`.
How to reproduce:
$ ip -t mon label link
(gdb) bt
.#0 _IO_vfprintf_internal (s=s@entry=0x0, format=format@entry=0x45460d “%d: “, ap=ap@entry=0x7fffffff7f18) at vfprintf.c:1278
.#1 0x0000000000451310 in color_fprintf (fp=0x0, attr=<optimized out>, fmt=0x45460d “%d: “) at color.c:108
.#2 0x000000000044a856 in print_color_int (t=t@entry=PRINT_ANY, color=color@entry=4294967295, key=key@entry=0x4545fc “ifindex”,
fmt=fmt@entry=0x45460d “%d: “, value=<optimized out>) at ip_print.c:132
.#3 0x000000000040ccd2 in print_int (value=<optimized out>, fmt=0x45460d “%d: “, key=0x4545fc “ifindex”, t=PRINT_ANY) at ip_common.h:189
.#4 print_linkinfo (who=<optimized out>, n=0x7fffffffa380, arg=0x7ffff77a82a0 <_IO_2_1_stdout_>) at ipaddress.c:1107
.#5 0x0000000000422e13 in accept_msg (who=0x7fffffff8320, ctrl=0x7fffffff8310, n=0x7fffffffa380, arg=0x7ffff77a82a0 <_IO_2_1_stdout_>) at ipmonitor.c:89
.#6 0x000000000044c58f in rtnl_listen (rtnl=0x672160 <rth>, handler=handler@entry=0x422c70 <accept_msg>, jarg=0x7ffff77a82a0 <_IO_2_1_stdout_>)
at libnetlink.c:761
.#7 0x00000000004233db in do_ipmonitor (argc=<optimized out>, argv=0x7fffffffe5a0) at ipmonitor.c:310
.#8 0x0000000000408f74 in do_cmd (argv0=0x7fffffffe7f5 “mon”, argc=3, argv=0x7fffffffe588) at ip.c:116
.#9 0x0000000000408a94 in main (argc=4, argv=0x7fffffffe580) at ip.c:311
Fixes: 6377572f ("ip: ip_print: add new API to print JSON or regular format output")
Reported-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Julien Fortin <julien@cumulusnetworks.com>
Move the json printer which is based on json writer into the
iproute2 library, so it can be used by library code and tools
other than ip. Should probably have been done from the beginning
like that given json writer is in the library already anyway.
No functional changes.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Julien Fortin <julien@cumulusnetworks.com>
Consolidate dump of prog info to use bpf_dump_prog_info() when possible.
Moving forward, we want to have a consistent output for BPF progs when
being dumped. E.g. in cls/act case we used to dump tag as a separate
netlink attribute before we had BPF_OBJ_GET_INFO_BY_FD bpf(2) command.
Move dumping tag into bpf_dump_prog_info() as well, and only dump the
netlink attribute for older kernels. Also, reuse bpf_dump_prog_info()
for XDP case, so we can dump tag and whether program was jited, which
we currently don't show.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
By making use of strncpy(), both implementations are really simple so
there is no need to add libbsd as additional dependency.
Signed-off-by: Phil Sutter <phil@nwl.cc>
RDMA devices are cross-functional devices from one side,
but very tailored for the specific markets from another.
Such diversity caused to spread of RDMA related configuration
across various tools, e.g. devlink, ip, ethtool, ib specific and
vendor specific solutions.
This patch adds ability to fill device and port information
by reading RDMA netlink.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
BIT() macro was implemented and used by devlink for now, but following
patches of rdmatool will reuse the same macro, so put it in common
header file.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add support for extended ack error reporting via libmnl.
Add a new function rtnl_talk_extack that takes a callback as an input
arg. If a netlink response contains extack attributes, the callback is
is invoked with the the err string, offset in the message and a pointer
to the message returned by the kernel.
If iproute2 is built without libmnl, it will still work but
extended error reports from kernel will not be available.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Make use of TCA_BPF_ID/TCA_ACT_BPF_ID that we exposed and print the ID
of the programs loaded and use the new BPF_OBJ_GET_INFO_BY_FD command
for dumping further information about the program, currently whether
the attached program is jited.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add support for map in map in the loader and add a small example program.
The outer map uses inner_id to reference a bpf_elf_map with a given ID
as the inner type. Loading maps is done in three passes, i) all non-map
in map maps are loaded, ii) all map in map maps are loaded based on the
inner_id map spec of a non-map in map with corresponding id, and iii)
related inner maps are attached to the map in map with given inner_idx
key. Pinned objetcs are assumed to be managed externally, so they are
only retrieved from BPF fs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Distinguish between externally learned vs offloaded FDBs. This is done
in order to indicate that FDBs added by software was successfully
offloaded.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Since commit a8f820a380a2a06 ('can: add Virtual CAN Tunnel driver (vxcan)')
for Linux 4.12 a virtual CAN tunnel driver analogue to veth is available in
Linux.
This patch adds the ability to create vxcan device pairs.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
ipaddr_list_flush_or_save generates a list of nlmsg's for links and
optionally for addresses. Move the code into ip_linkaddr_list and
export it along with the supporting infrastructure.
API to use this function is:
struct nlmsg_chain linfo = { NULL, NULL};
struct nlmsg_chain ainfo = { NULL, NULL};
ip_linkaddr_list(family, filter_req, &linfo, &ainfo);
... error checking and code looping over linfo/ainfo ...
free_nlmsg_chain(&linfo);
free_nlmsg_chain(&ainfo);
Signed-off-by: David Ahern <dsahern@gmail.com>
Kernel now supports up to 30 labels but not defined as part of the uapi.
iproute2 handles up to 8 labels but in a non-consistent way. Update ip
to handle more labels, but in a more programmatic way.
For the MPLS address family, the data field in inet_prefix is used for
labels. Increase that field to 64 u32's -- 64 as nothing more than a
convenient power of 2 number.
Update mpls_pton to take the length of the address field, convert that
length to number of labels and add better error handling to the parsing
of the user supplied string.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
'ip vrf pids' is used to list processes bound to a vrf, but it only
shows the pid leaving a lot of work for the user. Add the command
name to the output. With this patch you get the more user friendly:
$ ip vrf pids mgmt
1121 ntpd
1418 gdm-session-wor
1488 gnome-session
1491 dbus-launch
1492 dbus-daemon
1565 sshd
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
'ip vrf pids' is used to list processes bound to a vrf, but it only
shows the pid leaving a lot of work for the user. Add the command
name to the output. With this patch you get the more user friendly:
$ ip vrf pids mgmt
1121 ntpd
1418 gdm-session-wor
1488 gnome-session
1491 dbus-launch
1492 dbus-daemon
1565 sshd
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Allow callers of the dump API to handle nlmsg errors (e.g., an
unsupported feature). Setting RTNL_HANDLE_F_SUPPRESS_NLERR in the
rtnl_handle avoids unnecessary messages to the users in some case.
For example,
RTNETLINK answers: Operation not supported
when probing for support of a new feature.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
COLORFGBG environment variable is used to detect dark background.
Idea and a bit of code is borrowed from Vim, thanks.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The sample tc action allows sampling packets matching a classifier. It
peeks randomly packets, and samples them using the psample netlink
channel. The user can specify the psample group, which the packet will be
sampled to, the sampling rate and the packet truncation (to save
kernel-user traffic).
The sampled packets contain informative metadata, for example, the input
interface and the original packet length.
The action syntax:
tc filter add [...] \
action sample rate <RATE> group <GROUP> [trunc <SIZE>]
[...]
Where:
RATE := The sampling rate which is the ratio of packets observed at the
data source to the samples generated
GROUP := the psample module sampling group
SIZE := optional truncation size
An example for a common usecase of the sample tc action: to sample ingress
traffic from interface eth1, one may use the commands:
tc qdisc add dev eth1 handle ffff: ingress
tc filter add dev eth1 parent ffff: \
matchall action sample rate 12 group 4
Where the first command adds an ingress qdisc and the second starts
sampling randomly with an average of one sampled packet per 12 packets
on dev eth1 to psample group 4.
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
In order to ensure no backward/forward compatiablity problems,
make sure that all kernel headers used come from the local copy.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
iplink_vrf has 2 functions used to validate a user given device name is
a VRF device and to return the table id. If the user string is not a
device name ip commands with a vrf keyword show a confusing error
message: "RTNETLINK answers: No such device".
Add a variant of rtnl_talk that does not display the "RTNETLINK answers"
message and update iplink_vrf to use it.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Add make_path to recursively call mkdir as needed to create a given
path with the given mode.
Add find_cgroup2_mount to lookup path where cgroup2 is mounted. If it
is not already mounted, cgroup2 is mounted under /var/run/cgroup2 for
use by iproute2.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Based on version in kernel repo, samples/bpf/libbpf.h
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Adds support to configure BPF programs as nexthop actions via the LWT
framework.
Example:
ip route add 192.168.253.2/32 \
encap bpf out obj lwt_len_hist_kern.o section len_hist \
dev veth0
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Now that we made the BPF loader generic as a library, reuse it
for loading XDP programs as well. This basically adds a minimal
start of a facility for iproute2 to load XDP programs. There
currently only exists the xdp1_user.c sample code in the kernel
tree that sets up netlink directly and an iovisor/bcc front-end.
Since we have all the necessary infrastructure in place already
from tc side, we can just reuse its loader back-end and thus
facilitate migration and usability among the two for people
familiar with tc/bpf already. Sharing maps, performing tail calls,
etc works the same way as with tc. Naturally, once kernel
configuration API evolves, we will extend new features for XDP
here as well, resp. extend dumping of related netlink attributes.
Minimal example:
clang -target bpf -O2 -Wall -c prog.c -o prog.o
ip [-force] link set dev em1 xdp obj prog.o # attaching
ip [-d] link # dumping
ip link set dev em1 xdp off # detaching
For the dump, intention is that in the first line for each ip
link entry, we'll see "xdp" to indicate that this device has an
XDP program attached. Once we dump some more useful information
via netlink (digest, etc), idea is that 'ip -d link' will then
display additional relevant program information below the "link/
ether [...]" output line for such devices, for example.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
This action could be used before redirecting packets to a shared tunnel
device, or when redirecting packets arriving from a such a device.
The 'unset' action is optional. It is used to explicitly unset the
metadata created by the tunnel device during decap. If not used, the
metadata will be released automatically by the kernel.
The 'set' operation, will set the metadata with the specified values for
the encap.
For example, the following flower filter will forward all ICMP packets
destined to 11.11.11.2 through the shared vxlan device 'vxlan0'. Before
redirecting, a metadata for the vxlan tunnel is created using the
tunnel_key action and it's arguments:
$ tc filter add dev net0 protocol ip parent ffff: \
flower \
ip_proto 1 \
dst_ip 11.11.11.2 \
action tunnel_key set \
src_ip 11.11.0.1 \
dst_ip 11.11.0.2 \
id 11 \
action mirred egress redirect dev vxlan0
Signed-off-by: Amir Vadai <amir@vadai.me>
This is needed for some HWs to do proper macthing and steering.
Possible values are none, link, network, transport.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
This work moves the bpf loader into the iproute2 library and reworks
the tc specific parts into generic code. It's useful as we can then
more easily support new program types by just having the same ELF
loader backend. Joint work with Thomas Graf. I hacked a rough start
of a test suite to make sure nothing breaks [1] and looks all good.
[1] https://github.com/borkmann/clsact/blob/master/test_bpf.sh
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Adjusting iproute2 utility to support new macvlan link type mode called
"source".
Example of commands that can be applied:
ip link add link eth0 name macvlan0 type macvlan mode source
ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr del 00:11:11:11:11:11
ip link set link dev macvlan0 type macvlan macaddr flush
ip -details link show dev macvlan0
Based on previous work of Stefan Gula <steweg@gmail.com>
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Cc: steweg@gmail.com
Stephen Hemminger
David Ahern
Stephen Hemminger
Shalom Toledo
Jakub Kicinski
Stefano Brivio
Luca Boccassi
Peter Korsgaard
Lorenzo Bianconi
Sabrina Dubroca
Jesus Sanchez-Palencia
Vinicius Costa Gomes
Dave Taht
Mahesh Bandewar
Phil Sutter
Daniel Borkmann
Pavel Maltsev
Toke Høiland-Jørgensen
Steve Wise
Leon Romanovsky
Serhey Popovych
Arkadi Sharshevsky
Vincent Bernat
Chris Mi
Nishanth Devarajan
Lorenzo Colitti
Hangbin Liu
Petr Vorel
Ivan Delalande
Julien Fortin
Krister Johansen
Oliver Hartkopp
David Ahern
Petr Vorel
Yotam Gigi
Jamal Hadi Salim
Thomas Graf
Amir Vadai
Roi Dayan
michael-dev@fami-braun.de