Update kernel headers to commit:
4349abdb409b ("net: dsa: don't print non-fatal MTU error if not supported")
Signed-off-by: David Ahern <dsahern@gmail.com>
This patch adds support for recently
added link IFLA_PROTO_DOWN_REASON attribute.
IFLA_PROTO_DOWN_REASON enumerates reasons
for the already existing IFLA_PROTO_DOWN link
attribute.
$ cat /etc/iproute2/protodown_reasons.d/r.conf
0 mlag
1 evpn
2 vrrp
3 psecurity
$ ip link set dev vx10 protodown on protodown_reason vrrp on
$ip link show dev vx10
14: vx10: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
link/ether f2:32:28:b8:35:ff brd ff:ff:ff:ff:ff:ff protodown on
protodown_reason <vrrp>
$ip -p -j link show dev vx10
[ {
<snip>
"proto_down": true,
"proto_down_reason": [ "vrrp" ]
} ]
$ip link set dev vx10 protodown_reason mlag on
$ip link show dev vx10
14: vx10: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
link/ether f2:32:28:b8:35:ff brd ff:ff:ff:ff:ff:ff protodown on
protodown_reason <mlag,vrrp>
$ip -p -j link show dev vx10
[ {
<snip>
"proto_down": true,
"protodown_reason": [ "mlag","vrrp" ]
} ]
$ip -p -j link show dev vx10
$ip link set dev vx10 protodown off protodown_reason vrrp off
Error: Cannot clear protodown, active reasons.
$ip link set dev vx10 protodown off protodown_reason mlag off
$
Note: for somereason the json and non-json key for protodown
are different (protodown and proto_down). I have kept the
same for protodown reason for consistency (protodown_reason and
proto_down_reason).
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
This prints out the data from the given nested attribute
to the given FILE pointer, interpreting the firmware that
the kernel has for showing netlink policies.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
This is useful for iterating elements in a nested attribute,
if they're not parsed with a strict length limit or such.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Replace the iproute2 snapshot with a version string which is
autogenerated as part of the build process using git describe.
This will also allow seeing if the version of the command
is built from the same sources is as upstream.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch prepares infrastructure for matching sockets by cgroups.
Two helper functions are added for transformation between cgroup v2 ID
and pathname. Cgroup v2 cache is implemented as hash table indexed by ID.
This cache is needed for faster lookups of socket cgroup.
v2:
- style fixes (David Ahern)
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: David Ahern <dsahern@gmail.com>
Import rpl.h and rpl_iptunnel.h as of kernel commit:
354d86141796 ("Merge branch 'net-reduce-dynamic-lockdep-keys'")
Signed-off-by: David Ahern <dsahern@gmail.com>
When outputting in normal mode, forward the return value from
color_fprintf().
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Update kernel headers to commit
790ab249b55d ("net: ethernet: fec: Prevent MII event after MII_SPEED write")
and import mptcp.h
Signed-off-by: David Ahern <dsahern@gmail.com>
Currently new json object opens (and delete_json_obj closes) the object as
an array, what adds prints for the matching bracket '[' ']' at the
start/end of the object. This patch adds new_json_obj_plain() and the
matching delete_json_obj_plain() to enable opening and closing json object,
not as array and leave it to the using function to decide which type of
object to open/close as the main object.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Until now print_#type functions supported printing constant names and
unknown (variable) values only.
Add functions to allow printing when the name is also sent to the
function as a variable.
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Update kernel headers to commit:
4f2c17e0f332 ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next")
and import udp.h for the next patch.
Signed-off-by: David Ahern <dsahern@gmail.com>
$ make CCOPTS=-fno-common
gcc ... -o ip
ld: rt_names.o (symbol from plugin): in function "rtnl_rtprot_n2a":
(.text+0x0): multiple definition of "numeric"; ip.o (symbol from plugin):(.text+0x0): first defined here
gcc ... -o tipc
ld: ../lib/libutil.a(utils.o):(.bss+0xc): multiple definition of `pretty';
tipc.o:tipc.c:28: first defined here
References: https://bugzilla.opensuse.org/1160244
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
In kernel commit 8cb081746c03 ("netlink: make validation more configurable
for future strictness"), Linux started implicitly flagging nests with
NLA_F_NESTED, unless the nest is created with nla_nest_start_noflag().
The ETS code uses nla_nest_start() where possible, so it does not work with
the current iproute2 code. Have libnetlink catch up by admitting the flag
in the attribute.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit
9aaa29494030 ("Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue")
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit:
fe23d63422c8 Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Signed-off-by: David Ahern <dsahern@gmail.com>
Fixes: 6377572f0a ("ip: ip_print: add new API to print JSON or regular format output")
Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Update kernel headers to commit:
c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload")
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit:
c23fcbbc6aa4 ("tc-testing: added tests with cookie for conntrack TC action")
Signed-off-by: David Ahern <dsahern@gmail.com>
Implement addition/deletion of lists of properties, currently
alternative ifnames. Also extent the ip link show command to list them.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
The _PRINT_FUNC() macro expands to a function call.
Putting a semi-colon is unnecessary and causes warnings with -pedantic
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
iproute has an utility function which checks if a string is a prefix for
another one, to allow use of abbreviated commands, e.g. 'addr' or 'a'
instead of 'address'.
This routine unfortunately considers an empty string as prefix
of any pattern, leading to undefined behaviour when an empty
argument is passed to ip:
# ip ''
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
# tc ''
qdisc noqueue 0: dev lo root refcnt 2
# ip address add 192.0.2.0/24 '' 198.51.100.1 dev dummy0
# ip addr show dev dummy0
6: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 02:9d:5e:e9:3f:c0 brd ff:ff:ff:ff:ff:ff
inet 192.0.2.0/24 brd 198.51.100.1 scope global dummy0
valid_lft forever preferred_lft forever
Rewrite matches() so it takes care of an empty input, and doesn't
scan the input strings three times: the actual implementation
does 2 strlen and a memcpy to accomplish the same task.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Import tc_mpls.h uapi header from kernel headers at commit:
1ff2f0fa450e ("net/mlx5e: Return in default case statement in tx_post_resync_params")
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit:
1ff2f0fa450e ("net/mlx5e: Return in default case statement in tx_post_resync_params")
import include/uapi/linux/const.h per new dependency in
include/uapi/linux/pkt_cls.h.
Signed-off-by: David Ahern <dsahern@gmail.com>
iptables commit 933400b37d09 ("nft: xtables: add the infrastructure to translate from iptables to nft")
added an additional member to struct xtables_match and struct xtables_target.
This change is available for libxtables12 and up.
Add these members conditionally to support both newer and older versions.
Fixes: dd29621578 ("tc: add em_ipt ematch for calling xtables matches from tc matching context")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The netns_{save,restore} functions are only used in ipnetns.c now, since
the restore is not needed anymore after the netns exec command.
Move them in ipnetns.c, and make them static.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
'ip netns exec' changes the current netns just before executing a child
process, and restores it after forking. This is needed if we're running
in batch or do_all mode.
Some cleanups must be done both in the parent and in the child: the
parent must restore the previous netns, while the child must reset any
VRF association.
Unfortunately, if do_all is set, the VRF are not reset in the child, and
the spawned processes are started with the wrong VRF context. This can
be triggered with this script:
# ip -b - <<-'EOF'
link add type vrf table 100
link set vrf0 up
link add type dummy
link set dummy0 vrf vrf0 up
netns add ns1
EOF
# ip -all -b - <<-'EOF'
vrf exec vrf0 true
netns exec setsid -f sleep 1h
EOF
# ip vrf pids vrf0
314 sleep
# ps 314
PID TTY STAT TIME COMMAND
314 ? Ss 0:00 sleep 1h
Refactor cmd_exec() and pass to it a function pointer which is called in
the child before the final exec. In the netns exec case the function just
resets the VRF and switches netns.
Doing it in the child is less error prone and safer, because the parent
environment is always kept unaltered.
After this refactor some utility functions became unused, so remove them.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add a new parameter '-Numeric' to show the number of protocol, scope,
dsfield, etc directly instead of converting it to human readable name.
Do the same on tc and ss.
This patch is based on David Ahern's previous patch.
Suggested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Devlink commands which implements the dumpit callback may return error.
The netlink function netlink_dump() sends the errno value as the payload
of the message, while answering user space with NLMSG_DONE.
To enable receiving errno value for dumpit commands we have to check for
it in the message. If it is a negative value then the dump returned an
error so we should set errno accordingly and check for ext_ack in case
it was set.
Fixes: 049c58539f ("devlink: mnlg: Add support for extended ack")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
groups > 31 have to be joined using the setsockopt. Since the nexthop
group is 32, add a helper to allow 'ip monitor' to listen for nexthop
messages.
Signed-off-by: David Ahern <dsahern@gmail.com>
When creating a new netns or executing a program into an existing one,
the unshare() or setns() calls will change the current netns.
In batch mode, this can run commands on the wrong interfaces, as the
ifindex value is meaningful only in the current netns. For example, this
command fails because veth-c doesn't exists in the init netns:
# ip -b - <<-'EOF'
netns add client
link add name veth-c type veth peer veth-s netns client
addr add 192.168.2.1/24 dev veth-c
EOF
Cannot find device "veth-c"
Command failed -:7
But if there are two devices with the same name in the init and new netns,
ip will build a wrong ll_map with indexes belonging to the new netns,
and will execute actions in the init netns using this wrong mapping.
This script will flush all eth0 addresses and bring it down, as it has
the same ifindex of veth0 in the new netns:
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.76/24 brd 192.168.122.255 scope global dynamic eth0
valid_lft 3598sec preferred_lft 3598sec
# ip -b - <<-'EOF'
netns add client
link add name veth0 type veth peer name veth1
link add name veth-ns type veth peer name veth0 netns client
link set veth0 down
address flush veth0
EOF
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
3: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether c2:db:d0:34:13:4a brd ff:ff:ff:ff:ff:ff
4: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether ca:9d:6b:5f:5f:8f brd ff:ff:ff:ff:ff:ff
5: veth-ns@if2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 32:ef:22:df:51:0a brd ff:ff:ff:ff:ff:ff link-netns client
The same issue can be triggered by the netns exec subcommand with a
sligthy different script:
# ip netns add client
# ip -b - <<-'EOF'
netns exec client true
link add name veth0 type veth peer name veth1
link add name veth-ns type veth peer name veth0 netns client
link set veth0 down
address flush veth0
EOF
Fix this by adding two netns_{save,reset} functions, which are used
to get a file descriptor for the init netns, and restore it after
each batch command.
netns_save() is called before the unshare() or setns(),
while netns_restore() is called after each command.
Fixes: 0dc34c7713 ("iproute2: Add processless network namespace support")
Reviewed-and-tested-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
import asm-generic/sockios.h to fix the compile errors from the
movement of timestamp macros.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Update kernel headers to commit
a734d1f4c2fc ("net: openvswitch: return an error instead of doing BUG_ON()")
Signed-off-by: David Ahern <dsahern@gmail.com>
These warnings:
../include/uapi/linux/sockios.h:42:0: warning: "SIOCGSTAMP" redefined
../include/uapi/linux/sockios.h:43:0: warning: "SIOCGSTAMPNS" redefined
are from kernel commit 0768e17073dc5 ("net: socket: implement 64-bit
timestamps"). This commit moved the definitions of SIOCGSTAMP and
SIOCGSTAMPNS from include/asm-generic/sockios.h to
include/uapi/linux/sockios.h. Older OS'es already define them in
/usr/include/asm-generic/sockios.h resulting in ugly compile errors now:
In file included from ll_types.c:24:0:
../include/uapi/linux/sockios.h:42:0: warning: "SIOCGSTAMP" redefined
#define SIOCGSTAMP SIOCGSTAMP_OLD
In file included from /usr/include/x86_64-linux-gnu/asm/sockios.h:1:0,
from /usr/include/asm-generic/socket.h:5,
from /usr/include/x86_64-linux-gnu/asm/socket.h:1,
from /usr/include/x86_64-linux-gnu/bits/socket.h:368,
from /usr/include/x86_64-linux-gnu/sys/socket.h:38,
from ll_types.c:17:
/usr/include/asm-generic/sockios.h:11:0: note: this is the location of the previous definition
#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
so wrap them in #ifndef.
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit
148f025d41a8 ("Merge branch 'hns3-next'")
Note, these warnings:
../include/uapi/linux/sockios.h:42:0: warning: "SIOCGSTAMP" redefined
../include/uapi/linux/sockios.h:43:0: warning: "SIOCGSTAMPNS" redefined
are due to kernel commit
0768e17073dc5 ("net: socket: implement 64-bit timestamps")
which moved the definitions from include/asm-generic/sockios.h
to include/uapi/linux/sockios.h
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit:
bfbae2eafe05 ("Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue")
Signed-off-by: David Ahern <dsahern@gmail.com>
While iproute2 correctly uses ifinfomsg struct as the ancillary header
when requesting an FDB dump on old kernels, it sets the message type to
RTM_GETLINK. This results in wrong reply being returned.
Fix this by using RTM_GETNEIGH instead.
Before:
$ bridge fdb show brport dummy0
Not RTM_NEWNEIGH: 00000158 00000010 00000002
After:
$ bridge fdb show brport dummy0
2a:0b:41:1c:92:d3 vlan 1 master br0 permanent
2a:0b:41:1c:92:d3 master br0 permanent
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
Fixes: 05880354c2 ("bridge: fdb: Fix filtering with strict checking disabled")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: LiLiang <liali@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
AF_XDP is an address family that is optimized for high performance
packet processing.
This patch adds AF_XDP support to ss(8) so that sockets can be queried
and monitored.
Example:
$ sudo ss --xdp -e -p -m
Recv-Q Send-Q Local Address:Port Peer Address:Port
0 0 enp134s0f0:q20 *
users:(("xdpsock",pid=17787,fd=3)) ino:39424 sk:4
rx(entries:2048)
tx(entries:2048)
umem(id:1,size:8388608,num_pages:2048,chunk_size:2048,headroom:0,ifindex:7,
qid:20,zc:0,refs:1)
fr(entries:2048)
cr(entries:2048) skmem:(r0,rb212992,t0,tb212992,f0,w0,o0,bl0,d0)
0 0 enp24s0f0:q0 *
users:(("xdpsock",pid=17780,fd=3)) ino:37384 sk:5
rx(entries:2048)
tx(entries:2048)
umem(id:0,size:8388608,num_pages:2048,chunk_size:2048,headroom:0,ifindex:6,
qid:0,zc:1,refs:1)
fr(entries:2048)
cr(entries:2048) skmem:(r0,rb212992,t0,tb212992,f0,w0,o0,bl0,d0)
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Update kernel headers to commit:
c829f5f52db9 ("cxgb4: cxgb4_tc_u32: use struct_size() in kvzalloc()")
and import xdp_diag.h for the next patch.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add RTNL_HANDLE_F_STRICT_CHK flag and set in rth flags to let know
commands know if the kernel supports strict checking.
Extracted from patch from Ido to fix filtering with strict checking
enabled.
Cc: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Add filter function to rtnl_neighdump_req and a buffer to the
request for the filter functions to append attributes.
Signed-off-by: David Ahern <dsahern@gmail.com>
iproute2 has been updated for the new strict policy in the kernel. Add a
helper to call setsockopt to enable the feature. Add a call to ip.c and
bridge.c
The setsockopt fails on older kernels and the error can be safely ignored
- any new fields or attributes are ignored by the older kernel.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a filter function to rtnl_addrdump_req to set device index in the
address dump request if the user is filtering addresses by device. In
addition, add a new ipaddr_link_get to do a single RTM_GETLINK request
instead of a device dump yet still store the data in the linfo list.
Signed-off-by: David Ahern <dsahern@gmail.com>
Add a filter option to rtnl_routedump_req and use it to set rtm_flags
removing the need for rtnl_rtcache_request for dump requests.
Signed-off-by: David Ahern <dsahern@gmail.com>
David Ahern
Stephen Hemminger
Roopa Prabhu
Johannes Berg
David Ahern
Dmitry Yakunin
Benjamin Poirier
Ron Diskin
Jan Engelhardt
Petr Machata
Jiri Pirko
Nicolas Dichtel
Matteo Croce
Andrea Claudi
Eyal Birger
Hangbin Liu
Moshe Shemesh
Ido Schimmel
Davide Caratti
Björn Töpel
Stephen Hemminger