As noticed by one of the few users of routel script, it ends up in an
infinite loop when they pull out the cable from the NIC used for some
route. This is caused by its parser expecting the line of "ip route show"
output consists of "key value" pairs (except for the initial target range),
together with an old trap of Bourne style shells that "shift 2" does
nothing if there is only one argument left. Some keywords, e.g. "linkdown",
are not followed by a value.
Improve the parser to
(1) only set variables for keywords we care about
(2) recognize (currently) known keywords without value
This is still far from perfect (and certainly not future proof) but to
fully fix the script, one would probably have to rewrite the logic
completely (and I'm not sure it's worth the effort).
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Despite the past changes, users seemed to get confused by the seemingly
contradictory relation of priority value and actual rule priority.
Signed-off-by: Phil Sutter <phil@nwl.cc>
This attribute allows the administrator to adjust the packet marking
attribute of tunnels that support policy based routing.
Signed-off-by: Craig Gallek <kraig@google.com>
Make use of 128b user cookies
Introduce optional 128-bit action cookie.
Like all other cookie schemes in the networking world (eg in protocols
like http or existing kernel fib protocol field, etc) the idea is to
save user state that when retrieved serves as a correlator. The kernel
_should not_ intepret it. The user can store whatever they wish in the
128 bits.
Sample exercise(showing variable length use of cookie)
.. create an accept action with cookie a1b2c3d4
sudo $TC actions add action ok index 1 cookie a1b2c3d4
.. dump all gact actions..
sudo $TC -s actions ls action gact
action order 0: gact action pass
random type none pass val 0
index 1 ref 1 bind 0 installed 5 sec used 5 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
cookie a1b2c3d4
.. bind the accept action to a filter..
sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 1
... send some traffic..
$ ping 127.0.0.1 -c 3
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.020 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.027 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.038 ms
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
This patch adds information about seg6 encapsulation in the ip-route
manual, as well as the ip-sr manual page.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
This patch adds commands to support the tunnel source properties
("ip sr tunsrc") and the HMAC key -> secret, algorithm binding
("ip sr hmac").
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
'ip vrf pids' is used to list processes bound to a vrf, but it only
shows the pid leaving a lot of work for the user. Add the command
name to the output. With this patch you get the more user friendly:
$ ip vrf pids mgmt
1121 ntpd
1418 gdm-session-wor
1488 gnome-session
1491 dbus-launch
1492 dbus-daemon
1565 sshd
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
'ip vrf pids' is used to list processes bound to a vrf, but it only
shows the pid leaving a lot of work for the user. Add the command
name to the output. With this patch you get the more user friendly:
$ ip vrf pids mgmt
1121 ntpd
1418 gdm-session-wor
1488 gnome-session
1491 dbus-launch
1492 dbus-daemon
1565 sshd
...
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Currently specifying a device to ip netconf and it dumps only values
for IPv4. Change this to dump data for all families unless a specific
family is given.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Currently, 'ip netconf' only shows ipv4 and ipv6 netconf settings. If IPv6
is not enabled, the dump ends with
RTNETLINK answers: Operation not supported
when IPv6 request is attempted. Further, if the mpls_router module is also
loaded a separate request is needed to get MPLS settings.
To make this better going forward, use the new PF_UNSPEC dump all option
if the kernel supports it. If the kernel does not, it sets NLMSG_ERROR and
returns EOPNOTSUPP which is trapped and we fall back to the existing output
to maintain compatibility with existing kernels.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Allow callers of the dump API to handle nlmsg errors (e.g., an
unsupported feature). Setting RTNL_HANDLE_F_SUPPRESS_NLERR in the
rtnl_handle avoids unnecessary messages to the users in some case.
For example,
RTNETLINK answers: Operation not supported
when probing for support of a new feature.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
The maketable program used to generate one of the configuration
files at build time for netem would access past the end of the array
for one input value. This is a bug inherited from original NISTnet.
Just fold the value, like other code there.
This is not a runtime error security problem.
It only impacts the build process if the build machine
had extra hardening enabled.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for setting and displaying the ttl attribute
for MPLS IP lighweight tunnels.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Add support for setting and displaying the ttl-propagation attribute
initially used by MPLS to control propagation of MPLS TTL to IPv4/IPv6
TTL/hop-limit on popping final label on a per-route basis.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
These are basically stubs: The types which lacked their own help text
simply don't accept any options (yet). Still it might be a bit confusing
to users if they are presented with the generic 'ip link' help text
instead of something saying there are no type specific options.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Take help function in iplink_bridge.c as an example and make other link
types' help functions similar:
* Use a single fprintf() call (if possible).
* Don't state a full command line, just "... type OPTIONS".
* Put every option in it's own line, align options by column.
* List mandatory options first.
link_veth.c is intentionally left untouched because it's 'peer' option
eats all kinds of generic link options and the help text points this out
without duplicating all the options there again.
Signed-off-by: Phil Sutter <phil@nwl.cc>
While generating PDFs from the man pages, I saw the warning below from
several files. Compared the tc-matchall.8 with bridge.8 and used .RI
instead of .R. It should have no effect on the man page rendering.
`R' is a string (producing the registered sign), not a macro.
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
When neither group or remote is specified (or if they are specified with
the any address), nothing is sent to the kernel. In this case, the
kernel defaults to IPv4. This makes impossible to use IPv6 with
unspecified unicast remote ("bridge fdb add" will return
EAFNOTSUPPORT).
If the user specifies a preferred address family (eg, "ip -6 link add"),
then send either IFLA_VXLAN_GROUP or IFLA_VXLAN_GROUP6 to enforce the
use of the appropriate family.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
MPLS multipath routes are missing a space between 'nexthop' and 'via':
$ ip -net ns1 -f mpls ro ls
100
nexthopvia inet 172.16.2.2 dev virt12
nexthopvia inet 172.16.3.2 dev br0
Add it.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Having some examples in the top level man page might make it a little bit easier
for new users to get started. Reused some words / sentences from the existing
man pages.
Suggested-by: 積丹尼 Dan Jacobson <jidanni@jidanni.org>
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Support the new TCA_DUMP_INVISIBLE netlink attribute that allows asking
kernel to perform 'full qdisc dump', as for historical reasons some of the
default qdiscs are being hidden by the kernel.
The command syntax is being extended by voluntary 'invisible' argument to
'tc qdisc show'.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When built with GCC warnings enabled:
q_pie.c: In function ‘pie_parse_opt’:
q_pie.c:78:38: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
(alpha > ALPHA_MAX) || (alpha < ALPHA_MIN)) {
^
q_pie.c:85:35: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
(beta > BETA_MAX) || (beta < BETA_MIN)) {
^
This is because MIN is 0 and unsigned number can never be less than 0.
Therefore just remove the _MIN values.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Add support for new afstats subcommand. This uses the new
IFLA_STATS_AF_SPEC attribute of RTM_GETSTATS messages to show
per-device, AF-specific stats. At the moment the kernel only supports
MPLS AF stats, so that is all that's implemented here.
The print_num function is exposed from ipaddress.c to be used for
printing the new stats so that the human-readable option, if set, can
be respected.
Example of use:
$ ./ip/ip -f mpls link afstats dev eth1
3: eth1
mpls:
RX: bytes packets errors dropped noroute
9016 98 0 0 0
TX: bytes packets errors dropped
7232 113 0 0
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Stephen Hemminger
Zhang Shengju
Michal Kubeček
Phil Sutter
Craig Gallek
Jamal Hadi Salim
David Lebrun
David Ahern
Robert Shearman
Timothy Redaelli
Sabrina Dubroca
Roman Mashak
Alexander Alemayhu
Vincent Bernat
Jiri Kosina