man: fix spelling errors

Lots of little typo errors on man pages.
Found by running codespell

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

man/man8/ip-link.8.in

@@ -444,7 +444,7 @@ the following additional arguments are supported:
 - either 802.1Q or 802.1ad.
 
 .BI id " VLANID "
-- specifies the VLAN Identifer to use. Note that numbers with a leading " 0 " or " 0x " are interpreted as octal or hexadeimal, respectively.
+- specifies the VLAN Identifier to use. Note that numbers with a leading " 0 " or " 0x " are interpreted as octal or hexadecimal, respectively.
 
 .BR reorder_hdr " { " on " | " off " } "
 - specifies whether ethernet headers are reordered or not (default is
@@ -575,7 +575,7 @@ the following additional arguments are supported:
 .in +8
 .sp
 .BI  id " VNI "
-- specifies the VXLAN Network Identifer (or VXLAN Segment
+- specifies the VXLAN Network Identifier (or VXLAN Segment
 Identifier) to use.
 
 .BI dev " PHYS_DEV"
@@ -1240,7 +1240,7 @@ the following additional arguments are supported:
 .in +8
 .sp
 .BI  id " VNI "
-- specifies the Virtual Network Identifer to use.
+- specifies the Virtual Network Identifier to use.
 
 .sp
 .BI remote " IPADDR"
@@ -2507,7 +2507,7 @@ specifies the device to display address-family statistics for.
 
 .PP
 .I "TYPE"
-specifies which help of link type to dislpay.
+specifies which help of link type to display.
 
 .SS
 .I GROUP

man/man8/ip-macsec.8

@@ -119,7 +119,7 @@ type.
 .SH NOTES
 This tool can be used to configure the 802.1AE keys of the interface. Note that 802.1AE uses GCM-AES
 with a initialization vector (IV) derived from the packet number. The same key must not be used
-with the same IV more than once. Instead, keys must be frequently regenerated and distibuted.
+with the same IV more than once. Instead, keys must be frequently regenerated and distributed.
 This tool is thus mostly for debugging and testing, or in combination with a user-space application
 that reconfigures the keys. It is wrong to just configure the keys statically and assume them to work
 indefinitely. The suggested and standardized way for key management is 802.1X-2010, which is implemented

man/man8/ip-neighbour.8

@@ -85,11 +85,11 @@ the interface to which this neighbour is attached.
 
 .TP
 .BI proxy
-indicates whether we are proxying for this neigbour entry
+indicates whether we are proxying for this neighbour entry
 
 .TP
 .BI router
-indicates whether neigbour is a router
+indicates whether neighbour is a router
 
 .TP
 .BI extern_learn
@@ -244,7 +244,7 @@ lookup a neighbour entry to a destination given a device
 
 .TP
 .BI proxy
-indicates whether we should lookup a proxy neigbour entry
+indicates whether we should lookup a proxy neighbour entry
 
 .TP
 .BI to " ADDRESS " (default)

man/man8/ss.8

@@ -69,7 +69,7 @@ how long time the timer will expire
 .P
 .TP
 .B <retrans>
-how many times the retransmission occured
+how many times the retransmission occurred
 .RE
 .TP
 .B \-e, \-\-extended

man/man8/tc-cake.8

@@ -413,9 +413,9 @@ suffered by Australasian residents.  Equivalent to
 .SH FLOW ISOLATION PARAMETERS
 With flow isolation enabled, CAKE places packets from different flows into
 different queues, each of which carries its own AQM state.  Packets from each
-queue are then delivered fairly, according to a DRR++ algorithm which minimises
+queue are then delivered fairly, according to a DRR++ algorithm which minimizes
 latency for "sparse" flows.  CAKE uses a set-associative hashing algorithm to
-minimise flow collisions.
+minimize flow collisions.
 
 These keywords specify whether fairness based on source address, destination
 address, individual flows, or any combination of those is desired.

man/man8/tc-ct.8

@@ -66,7 +66,7 @@ Restore any previous configured nat.
 Remove any conntrack state and metadata (mark/label) from the packet (must only option specified).
 .TP
 .BI force
-Forces conntrack direction for a previously commited connections, so that current direction will become the original direction (only valid with commit).
+Forces conntrack direction for a previously committed connections, so that current direction will become the original direction (only valid with commit).
 
 .SH EXAMPLES
 Example showing natted firewall in conntrack zone 2, and conntrack mark usage:

man/man8/tc-flower.8

@@ -306,7 +306,7 @@ If the prefix is missing, \fBtc\fR assumes a full-length host match.
 .TQ
 .IR \fBsrc_port " { "  MASKED_NUMBER " | " " MIN_VALUE-MAX_VALUE "  }
 Match on layer 4 protocol source or destination port number, with an
-optional mask. Alternatively, the mininum and maximum values can be
+optional mask. Alternatively, the minimum and maximum values can be
 specified to match on a range of layer 4 protocol source or destination
 port numbers. Only available for
 .BR ip_proto " values " udp ", " tcp  " and " sctp
@@ -384,7 +384,7 @@ Matches on connection tracking info
 .RS
 .TP
 .I CT_STATE
-Match the connection state, and can ne combination of [{+|-}flag] flags, where flag can be one of
+Match the connection state, and can be combination of [{+|-}flag] flags, where flag can be one of
 .RS
 .TP
 trk - Tracked connection.

man/man8/tc-matchall.8

@@ -45,7 +45,7 @@ tc filter add dev eth1 parent ffff:           \\
 .EE
 .RE
 
-The first command creats an ingress qdisc with handle
+The first command creates an ingress qdisc with handle
 .BR ffff:
 on device
 .BR eth1
@@ -64,7 +64,7 @@ tc filter add dev eth1 parent 1:               \\
 .EE
 .RE
 
-The first command creats an egress qdisc with handle
+The first command creates an egress qdisc with handle
 .BR 1:
 that replaces the root qdisc on device
 .BR eth1

man/man8/tc-pie.8

@@ -40,7 +40,7 @@ aims to control delay. The main design goals are
 PIE is designed to control delay effectively. First, an average dequeue rate is
 estimated based on the standing queue. The rate is used to calculate the current
 delay. Then, on a periodic basis, the delay is used to calculate the dropping
-probabilty. Finally, on arrival, a packet is dropped (or marked) based on this
+probability. Finally, on arrival, a packet is dropped (or marked) based on this
 probability.
 
 PIE makes adjustments to the probability based on the trend of the delay i.e.
@@ -52,7 +52,7 @@ growth and are determined through control theoretic approaches. alpha determines
 the deviation between the current and target latency changes probability. beta exerts
 additional adjustments depending on the latency trend.
 
-The drop probabilty is used to mark packets in ecn mode. However, as in RED,
+The drop probability is used to mark packets in ecn mode. However, as in RED,
 beyond 10% packets are dropped based on this probability. The bytemode is used
 to drop packets proportional to the packet size.
 

man/man8/tc-sfb.8

@@ -105,7 +105,7 @@ device the qdisc is attached to.
 .TP
 max
 Maximum length of a buckets queue, in packets, before packets start being
-dropped. Should be sightly larger than
+dropped. Should be slightly larger than
 .B target
 , but should not be set to values exceeding 1.5 times that of
 .B target .

man/man8/tc-tunnel_key.8

@@ -96,13 +96,13 @@ variable length hexadecimal value. Additionally multiple options may be
 listed using a comma delimiter.
 .TP
 .B vxlan_opts
-Vxlan metatdata options.
+Vxlan metadata options.
 .B vxlan_opts
 is specified in the form GBP, as a 32bit number. Multiple options is not
 supported.
 .TP
 .B erspan_opts
-Erspan metatdata options.
+Erspan metadata options.
 .B erspan_opts
 is specified in the form VERSION:INDEX:DIR:HWID, where VERSION is represented
 as a 8bit number, INDEX as an 32bit number, DIR and HWID as a 8bit number.